linux-f2fs-devel.lists.sourceforge.net archive mirror
 help / color / mirror / Atom feed
From: Chao Yu <yuchao0@huawei.com>
To: Gao Xiang <hsiangkao@redhat.com>, <changfengnan@vivo.com>
Cc: jaegeuk@kernel.org, linux-f2fs-devel@lists.sourceforge.net
Subject: Re: [f2fs-dev] 答复: [PATCH] f2fs: compress: avoid unnecessary check in f2fs_prepare_compress_overwrite
Date: Thu, 6 May 2021 17:15:04 +0800	[thread overview]
Message-ID: <103e8ec4-d14f-0f2a-72d4-ffd4e215685f@huawei.com> (raw)
In-Reply-To: <20210426090024.GB4042836@xiangao.remote.csb>

On 2021/4/26 17:00, Gao Xiang wrote:
> On Mon, Apr 26, 2021 at 04:42:20PM +0800, changfengnan@vivo.com wrote:
>> Thank you for the reminder, I hadn't thought about fallocate before.
>> I have done some tests and the results are as expected.
>> Here is my test method, create a compressed file, and use fallocate with keep size, when write data to expand area, f2fs_prepare_compress_overwrite
>> always return 0, the behavior is same as my patch , apply my patch can avoid those check.
>> Is there anything else I haven't thought of?
> 
> Nope, I didn't look into the implementation. Just a wild guess.
> 
> (I just wondered if the cluster size is somewhat large (e.g. 64k),
>   but with a partial fallocate (e.g. 16k), and does it behave ok?
>   or some other corner cases/conditions are needed.)

Xiang, sorry for late reply.

Now, f2fs triggers compression only if one cluster is fully written,
e.g. cluster size is 16kb, isize is 8kb, then the first cluster is
non-compressed one, so we don't need to prepare for compressed
cluster overwrite during write_begin(). Also, blocks fallocated
beyond isize should never be compressed, so we don't need to worry
about that.

Thanks,

> 
> If that is fine, I have no problem about this, yet i_size here
> is generally somewhat risky since after post-EOF behavior
> changes (e.g. supporting FALLOC_FL_ZERO_RANGE with keep size
> later), it may cause some potential regression.
> 
>>
>> -----邮件原件-----
>> 发件人: Gao Xiang <hsiangkao@redhat.com>
>> 发送时间: 2021年4月26日 11:19
>> 收件人: Fengnan Chang <changfengnan@vivo.com>
>> 抄送: chao@kernel.org; jaegeuk@kernel.org;
>> linux-f2fs-devel@lists.sourceforge.net
>> 主题: Re: [f2fs-dev] [PATCH] f2fs: compress: avoid unnecessary check in
>> f2fs_prepare_compress_overwrite
>>
>> On Mon, Apr 26, 2021 at 10:11:53AM +0800, Fengnan Chang wrote:
>>> when write compressed file with O_TRUNC, there will be a lot of
>>> unnecessary check valid blocks in f2fs_prepare_compress_overwrite,
>>> especially when written in page size, remove it.
>>>
>>> Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
>>
>> Even though I didn't look into the whole thing, my reaction here is roughly
>> how to handle fallocate with keep size? Does it work as expected?
>>
>>> ---
>>>   fs/f2fs/data.c | 4 ++++
>>>   1 file changed, 4 insertions(+)
>>>
>>> diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c index
>>> cf935474ffba..9c3b0849f35e 100644
>>> --- a/fs/f2fs/data.c
>>> +++ b/fs/f2fs/data.c
>>> @@ -3270,6 +3270,7 @@ static int f2fs_write_begin(struct file *file,
>>> struct address_space *mapping,
>>>   	struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
>>>   	struct page *page = NULL;
>>>   	pgoff_t index = ((unsigned long long) pos) >> PAGE_SHIFT;
>>> +	pgoff_t end = (i_size_read(inode) + PAGE_SIZE - 1) >> PAGE_SHIFT;
>>>   	bool need_balance = false, drop_atomic = false;
>>>   	block_t blkaddr = NULL_ADDR;
>>>   	int err = 0;
>>> @@ -3306,6 +3307,9 @@ static int f2fs_write_begin(struct file *file,
>>> struct address_space *mapping,
>>>
>>>   		*fsdata = NULL;
>>>
>>> +		if (index >= end)
>>> +			goto repeat;
>>> +
>>>   		ret = f2fs_prepare_compress_overwrite(inode, pagep,
>>>   							index, fsdata);
>>>   		if (ret < 0) {
>>> --
>>> 2.29.0
>>
>>
>>
>>
>>
>>
>>
> 
> 
> 
> _______________________________________________
> Linux-f2fs-devel mailing list
> Linux-f2fs-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
> 


_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

  parent reply	other threads:[~2021-05-06  9:15 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-26  2:11 [f2fs-dev] [PATCH] f2fs: compress: avoid unnecessary check in f2fs_prepare_compress_overwrite Fengnan Chang
2021-04-26  3:19 ` Gao Xiang
2021-04-26  8:42   ` [f2fs-dev] 答复: " changfengnan
2021-04-26  9:00     ` Gao Xiang
2021-04-26 12:16       ` [f2fs-dev] 答复: " changfengnan
2021-05-06  9:15       ` Chao Yu [this message]
2021-05-06  9:58         ` [f2fs-dev] " Gao Xiang via Linux-f2fs-devel
2021-05-06 10:37           ` Chao Yu
2021-05-06 12:15             ` Gao Xiang via Linux-f2fs-devel
2021-05-06 12:15             ` [f2fs-dev] 答复: " changfengnan
2021-05-06 12:38               ` Gao Xiang via Linux-f2fs-devel
2021-04-27 12:42 ` [f2fs-dev] " Chao Yu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=103e8ec4-d14f-0f2a-72d4-ffd4e215685f@huawei.com \
    --to=yuchao0@huawei.com \
    --cc=changfengnan@vivo.com \
    --cc=hsiangkao@redhat.com \
    --cc=jaegeuk@kernel.org \
    --cc=linux-f2fs-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).