From: Jaegeuk Kim <jaegeuk.kim@samsung.com>
To: Andrey Tsyvarev <tsyvarev@ispras.ru>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
Alexey Khoroshilov <khoroshilov@ispras.ru>,
linux-f2fs-devel@lists.sourceforge.net
Subject: Re: f2fs: BUG_ON() is triggered when mount valid f2fs filesystem
Date: Thu, 17 Apr 2014 08:35:37 +0900 [thread overview]
Message-ID: <1397691337.7727.18.camel@kjgkr> (raw)
In-Reply-To: <534E494C.7050909@ispras.ru>
Hi,
2014-04-16 (수), 13:11 +0400, Andrey Tsyvarev:
> Hi,
>
> With this patch mounting of the image continues to fail (with similar
> BUG_ON).
> But when image is formatted again (and steps mentioned in the previous
> message are performed),
> mounting of it is now succeed.
>
> Is this is a true purpose of the patch?
Indeed. The patch solves there-in root cause.
But, if you're trying to use the failed image again, simply you can skip
the errorneous part by:
# mount ... -o disable_roll_forward ...
Once sync or umount whatever checkpoint is done after that, the image
will be mounted without "disable_roll_forward".
Thanks,
>
> 15.04.2014 15:04, Jaegeuk Kim пишет:
> > Hi,
> >
> > Thank you for the report.
> > I retrieved the fault image and found out that previous garbage data
> > wreak such the wrong behaviors.
> > So, I wrote the following patch that fills one zero-block at the
> > checkpoint procedure.
> > If the underlying device supports discard, I expect that it mostly
> > doesn't incur any performance regression significantly.
> >
> > Could you test this patch?
> >
> > >From 60588ceb7277aae2a79e7f67f5217d1256720d78 Mon Sep 17 00:00:00 2001
> > From: Jaegeuk Kim <jaegeuk.kim@samsung.com>
> > Date: Tue, 15 Apr 2014 13:57:55 +0900
> > Subject: [PATCH] f2fs: avoid to conduct roll-forward due to the remained
> > garbage blocks
> >
> > The f2fs always scans the next chain of direct node blocks.
> > But some garbage blocks are able to be remained due to no discard
> > support or
> > SSR triggers.
> > This occasionally wreaks recovering wrong inodes that were used or
> > BUG_ONs
> > due to reallocating node ids as follows.
> >
> > When mount this f2fs image:
> > http://linuxtesting.org/downloads/f2fs_fault_image.zip
> > BUG_ON is triggered in f2fs driver (messages below are generated on
> > kernel 3.13.2; for other kernels output is similar):
> >
> > kernel BUG at fs/f2fs/node.c:215!
> > Call Trace:
> > [<ffffffffa032ebad>] recover_inode_page+0x1fd/0x3e0 [f2fs]
> > [<ffffffff811446e7>] ? __lock_page+0x67/0x70
> > [<ffffffff81089990>] ? autoremove_wake_function+0x50/0x50
> > [<ffffffffa0337788>] recover_fsync_data+0x1398/0x15d0 [f2fs]
> > [<ffffffff812b9e5c>] ? selinux_d_instantiate+0x1c/0x20
> > [<ffffffff811cb20b>] ? d_instantiate+0x5b/0x80
> > [<ffffffffa0321044>] f2fs_fill_super+0xb04/0xbf0 [f2fs]
> > [<ffffffff811b861e>] ? mount_bdev+0x7e/0x210
> > [<ffffffff811b8769>] mount_bdev+0x1c9/0x210
> > [<ffffffffa0320540>] ? validate_superblock+0x210/0x210 [f2fs]
> > [<ffffffffa031cf8d>] f2fs_mount+0x1d/0x30 [f2fs]
> > [<ffffffff811b9497>] mount_fs+0x47/0x1c0
> > [<ffffffff81166e00>] ? __alloc_percpu+0x10/0x20
> > [<ffffffff811d4032>] vfs_kern_mount+0x72/0x110
> > [<ffffffff811d6763>] do_mount+0x493/0x910
> > [<ffffffff811615cb>] ? strndup_user+0x5b/0x80
> > [<ffffffff811d6c70>] SyS_mount+0x90/0xe0
> > [<ffffffff8166f8d9>] system_call_fastpath+0x16/0x1b
> >
> > Found by Linux File System Verification project (linuxtesting.org).
> >
> > Reported-by: Andrey Tsyvarev <tsyvarev@ispras.ru>
> > Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
> > ---
> > fs/f2fs/checkpoint.c | 6 ++++++
> > fs/f2fs/f2fs.h | 1 +
> > fs/f2fs/segment.c | 17 +++++++++++++++--
> > 3 files changed, 22 insertions(+), 2 deletions(-)
> >
> > diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c
> > index 4aa521a..890e23d 100644
> > --- a/fs/f2fs/checkpoint.c
> > +++ b/fs/f2fs/checkpoint.c
> > @@ -762,6 +762,12 @@ static void do_checkpoint(struct f2fs_sb_info *sbi,
> > bool is_umount)
> > void *kaddr;
> > int i;
> >
> > + /*
> > + * This avoids to conduct wrong roll-forward operations and uses
> > + * metapages, so should be called prior to sync_meta_pages below.
> > + */
> > + discard_next_dnode(sbi);
> > +
> > /* Flush all the NAT/SIT pages */
> > while (get_pages(sbi, F2FS_DIRTY_META))
> > sync_meta_pages(sbi, META, LONG_MAX);
> > diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
> > index 2ecac83..2c5a5da 100644
> > --- a/fs/f2fs/f2fs.h
> > +++ b/fs/f2fs/f2fs.h
> > @@ -1179,6 +1179,7 @@ int f2fs_issue_flush(struct f2fs_sb_info *);
> > void invalidate_blocks(struct f2fs_sb_info *, block_t);
> > void refresh_sit_entry(struct f2fs_sb_info *, block_t, block_t);
> > void clear_prefree_segments(struct f2fs_sb_info *);
> > +void discard_next_dnode(struct f2fs_sb_info *);
> > int npages_for_summary_flush(struct f2fs_sb_info *);
> > void allocate_new_segments(struct f2fs_sb_info *);
> > struct page *get_sum_page(struct f2fs_sb_info *, unsigned int);
> > diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
> > index 1e264e7..9993f94 100644
> > --- a/fs/f2fs/segment.c
> > +++ b/fs/f2fs/segment.c
> > @@ -335,13 +335,26 @@ static void locate_dirty_segment(struct
> > f2fs_sb_info *sbi, unsigned int segno)
> > mutex_unlock(&dirty_i->seglist_lock);
> > }
> >
> > -static void f2fs_issue_discard(struct f2fs_sb_info *sbi,
> > +static int f2fs_issue_discard(struct f2fs_sb_info *sbi,
> > block_t blkstart, block_t blklen)
> > {
> > sector_t start = SECTOR_FROM_BLOCK(sbi, blkstart);
> > sector_t len = SECTOR_FROM_BLOCK(sbi, blklen);
> > - blkdev_issue_discard(sbi->sb->s_bdev, start, len, GFP_NOFS, 0);
> > trace_f2fs_issue_discard(sbi->sb, blkstart, blklen);
> > + return blkdev_issue_discard(sbi->sb->s_bdev, start, len, GFP_NOFS, 0);
> > +}
> > +
> > +void discard_next_dnode(struct f2fs_sb_info *sbi)
> > +{
> > + struct curseg_info *curseg = CURSEG_I(sbi, CURSEG_WARM_NODE);
> > + block_t blkaddr = NEXT_FREE_BLKADDR(sbi, curseg);
> > +
> > + if (f2fs_issue_discard(sbi, blkaddr, 1)) {
> > + struct page *page = grab_meta_page(sbi, blkaddr);
> > + /* zero-filled page */
> > + set_page_dirty(page);
> > + f2fs_put_page(page, 1);
> > + }
> > }
> >
> > static void add_discard_addrs(struct f2fs_sb_info *sbi,
>
--
Jaegeuk Kim
Samsung
------------------------------------------------------------------------------
Learn Graph Databases - Download FREE O'Reilly Book
"Graph Databases" is the definitive new guide to graph databases and their
applications. Written by three acclaimed leaders in the field,
this first edition is now available. Download your free book today!
http://p.sf.net/sfu/NeoTech
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
next prev parent reply other threads:[~2014-04-16 23:37 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-06 5:43 f2fs: f2fs unmount hangs if f2fs_init_acl() fails during mkdir syscall Andrey Tsyvarev
2014-02-06 6:02 ` Jaegeuk Kim
2014-02-06 12:17 ` Andrey Tsyvarev
2014-02-07 0:49 ` Jaegeuk Kim
2014-02-07 5:12 ` Jaegeuk Kim
2014-02-11 8:29 ` Andrey Tsyvarev
2014-02-13 8:32 ` Gu Zheng
2014-02-13 9:40 ` Andrey Tsyvarev
2014-02-13 9:48 ` Gu Zheng
2014-02-14 2:00 ` [f2fs-dev] " Jaegeuk Kim
2014-02-14 1:58 ` Jaegeuk Kim
2014-04-14 11:12 ` f2fs: BUG_ON() is triggered when mount valid f2fs filesystem Andrey Tsyvarev
2014-04-15 11:04 ` Jaegeuk Kim
2014-04-16 9:11 ` Andrey Tsyvarev
2014-04-16 23:35 ` Jaegeuk Kim [this message]
2014-04-17 1:11 ` Alexey Khoroshilov
2014-04-17 7:45 ` Jaegeuk Kim
2014-04-18 6:04 ` Alexey Khoroshilov
2014-04-18 6:35 ` Jaegeuk Kim
2014-04-18 6:40 ` Gu Zheng
2014-07-21 10:56 ` f2fs: Possible use-after-free when umount filesystem Andrey Tsyvarev
2014-07-21 11:09 ` Fwd: " Andrey Tsyvarev
2014-07-22 2:17 ` Gu Zheng
2014-07-22 10:04 ` Andrey Tsyvarev
2014-07-23 2:12 ` Chao Yu
2014-07-23 3:39 ` [f2fs-dev] " Gu Zheng
2014-07-24 10:14 ` Andrey Tsyvarev
2014-07-25 3:22 ` Chao Yu
2014-07-25 5:49 ` Gu Zheng
2014-07-25 15:37 ` Jaegeuk Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397691337.7727.18.camel@kjgkr \
--to=jaegeuk.kim@samsung.com \
--cc=khoroshilov@ispras.ru \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=tsyvarev@ispras.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).