From: Chao Yu <chao@kernel.org>
To: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Ming Yan <yanming@tju.edu.cn>,
linux-kernel@vger.kernel.org, stable@vger.kernel.org,
linux-f2fs-devel@lists.sourceforge.net
Subject: Re: [f2fs-dev] [PATCH] f2fs: fix to do sanity check for inline inode
Date: Thu, 5 May 2022 22:33:51 +0800 [thread overview]
Message-ID: <142acf95-c940-8d4a-7f00-08f1bb816c49@kernel.org> (raw)
In-Reply-To: <YnNFCEdSpyVSaTZq@google.com>
On 2022/5/5 11:31, Jaegeuk Kim wrote:
> On 05/05, Chao Yu wrote:
>> On 2022/5/5 5:28, Jaegeuk Kim wrote:
>>> On 04/28, Chao Yu wrote:
>>>> As Yanming reported in bugzilla:
>>>>
>>>> https://bugzilla.kernel.org/show_bug.cgi?id=215895
>>>>
>>>> I have encountered a bug in F2FS file system in kernel v5.17.
>>>>
>>>> The kernel message is shown below:
>>>>
>>>> kernel BUG at fs/inode.c:611!
>>>> Call Trace:
>>>> evict+0x282/0x4e0
>>>> __dentry_kill+0x2b2/0x4d0
>>>> dput+0x2dd/0x720
>>>> do_renameat2+0x596/0x970
>>>> __x64_sys_rename+0x78/0x90
>>>> do_syscall_64+0x3b/0x90
>>>>
>>>> The root cause is: fuzzed inode has both inline_data flag and encrypted
>>>> flag, so after it was deleted by rename(), during f2fs_evict_inode(),
>>>> it will cause inline data conversion due to flags confilction, then
>>>> page cache will be polluted and trigger panic in clear_inode().
>>>>
>>>> This patch tries to fix the issue by do more sanity checks for inline
>>>> data inode in sanity_check_inode().
>>>>
>>>> Cc: stable@vger.kernel.org
>>>> Reported-by: Ming Yan <yanming@tju.edu.cn>
>>>> Signed-off-by: Chao Yu <chao.yu@oppo.com>
>>>> ---
>>>> fs/f2fs/f2fs.h | 7 +++++++
>>>> fs/f2fs/inode.c | 3 +--
>>>> 2 files changed, 8 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
>>>> index 27aa93caec06..64c511b498cc 100644
>>>> --- a/fs/f2fs/f2fs.h
>>>> +++ b/fs/f2fs/f2fs.h
>>>> @@ -4173,6 +4173,13 @@ static inline void f2fs_set_encrypted_inode(struct inode *inode)
>>>> */
>>>> static inline bool f2fs_post_read_required(struct inode *inode)
>>>> {
>>>> + /*
>>>> + * used by sanity_check_inode(), when disk layout fields has not
>>>> + * been synchronized to inmem fields.
>>>> + */
>>>> + if (file_is_encrypt(inode) || file_is_verity(inode) ||
>>>> + F2FS_I(inode)->i_flags & F2FS_COMPR_FL)
>>>> + return true;
>>>> return f2fs_encrypted_file(inode) || fsverity_active(inode) ||
>>>> f2fs_compressed_file(inode);
>>>> }
>>>> diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c
>>>> index 83639238a1fe..234b8ed02644 100644
>>>> --- a/fs/f2fs/inode.c
>>>> +++ b/fs/f2fs/inode.c
>>>> @@ -276,8 +276,7 @@ static bool sanity_check_inode(struct inode *inode, struct page *node_page)
>>>> }
>>>> }
>>>> - if (f2fs_has_inline_data(inode) &&
>>>> - (!S_ISREG(inode->i_mode) && !S_ISLNK(inode->i_mode))) {
>>>> + if (f2fs_has_inline_data(inode) && !f2fs_may_inline_data(inode)) {
>>>
>>> It seems f2fs_may_inline_data() is breaking the atomic write case. Please fix.
>>
>> sanity_check_inode() change only affect f2fs_iget(), during inode initialization,
>> file should not be set as atomic one, right?
>>
>> I didn't see any failure during 'f2fs_io write atomic_write' testcase... could you
>> please provide me detail of the testcase?
>
> I just applied this into my device and was getting lots of the below error
> messages resulting in open failures of database files.
Could you please help to apply below patch and dump the log?
From: Chao Yu <chao@kernel.org>
Subject: [PATCH] f2fs: fix to do sanity check for inline inode
Signed-off-by: Chao Yu <chao.yu@oppo.com>
---
fs/f2fs/f2fs.h | 7 +++++++
fs/f2fs/inode.c | 11 +++++++----
2 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 0f8c426aed50..13a9212d6cb6 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -4159,6 +4159,13 @@ static inline void f2fs_set_encrypted_inode(struct inode *inode)
*/
static inline bool f2fs_post_read_required(struct inode *inode)
{
+ /*
+ * used by sanity_check_inode(), when disk layout fields has not
+ * been synchronized to inmem fields.
+ */
+ if (file_is_encrypt(inode) || file_is_verity(inode) ||
+ F2FS_I(inode)->i_flags & F2FS_COMPR_FL)
+ return true;
return f2fs_encrypted_file(inode) || fsverity_active(inode) ||
f2fs_compressed_file(inode);
}
diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c
index 02630c17da93..a98614a24ad0 100644
--- a/fs/f2fs/inode.c
+++ b/fs/f2fs/inode.c
@@ -276,11 +276,14 @@ static bool sanity_check_inode(struct inode *inode, struct page *node_page)
}
}
- if (f2fs_has_inline_data(inode) &&
- (!S_ISREG(inode->i_mode) && !S_ISLNK(inode->i_mode))) {
+ if (f2fs_has_inline_data(inode) && !f2fs_may_inline_data(inode)) {
set_sbi_flag(sbi, SBI_NEED_FSCK);
- f2fs_warn(sbi, "%s: inode (ino=%lx, mode=%u) should not have inline_data, run fsck to fix",
- __func__, inode->i_ino, inode->i_mode);
+ f2fs_warn(sbi, "%s: inode (ino=%lx, mode=%u) reason(%d, %llu, %ld, %d, %d, %lu) should not have inline_data, run fsck to fix",
+ __func__, inode->i_ino, inode->i_mode,
+ f2fs_is_atomic_file(inode),
+ i_size_read(inode), MAX_INLINE_DATA(inode),
+ file_is_encrypt(inode), file_is_verity(inode),
+ F2FS_I(inode)->i_flags & F2FS_COMPR_FL);
return false;
}
--
2.32.0
>
>>
>> Thanks,
>>
>>>
>>>> set_sbi_flag(sbi, SBI_NEED_FSCK);
>>>> f2fs_warn(sbi, "%s: inode (ino=%lx, mode=%u) should not have inline_data, run fsck to fix",
>>>> __func__, inode->i_ino, inode->i_mode);
>>>> --
>>>> 2.25.1
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
next prev parent reply other threads:[~2022-05-05 14:34 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-28 2:49 [f2fs-dev] [PATCH] f2fs: fix to do sanity check for inline inode Chao Yu
2022-05-04 21:28 ` Jaegeuk Kim
2022-05-05 2:49 ` Chao Yu
2022-05-05 3:31 ` Jaegeuk Kim
2022-05-05 14:33 ` Chao Yu [this message]
2022-05-08 13:52 ` Chao Yu
2022-05-09 16:57 ` Jaegeuk Kim
2022-05-13 21:35 ` Jaegeuk Kim
2022-05-13 21:07 ` Jaegeuk Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=142acf95-c940-8d4a-7f00-08f1bb816c49@kernel.org \
--to=chao@kernel.org \
--cc=jaegeuk@kernel.org \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=yanming@tju.edu.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).