From: Eryu Guan <eguan@redhat.com>
To: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: fstests@vger.kernel.org, linux-f2fs-devel@lists.sourceforge.net
Subject: Re: [PATCH v2] generic/392: add a testcase to check some inline truncation behaviors
Date: Fri, 18 Nov 2016 14:43:06 +0800 [thread overview]
Message-ID: <20161118064306.GG27776@eguan.usersys.redhat.com> (raw)
In-Reply-To: <20161117180436.GB74211@jaegeuk>
On Thu, Nov 17, 2016 at 10:04:36AM -0800, Jaegeuk Kim wrote:
> This patch introduces a new testcase to test some small truncations to check
> inline_data and its cached data are truncated correctly at the same time.
>
> The inline_data feature was introduced in ext4 and f2fs as follows.
> ext4 : http://lwn.net/Articles/468678/
> f2fs : http://lwn.net/Articles/573408/
>
> The basic idea is embedding small-sized file's data into relatively large
> inode space.
> In ext4, up to 132 bytes of data can be stored in 256 bytes-sized inode.
> In f2fs, up to 3.4KB of data can be embedded into 4KB-sized inode block.
>
> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
> ---
> tests/generic/392 | 128 ++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/generic/392.out | 45 ++++++++++++++++++
> tests/generic/group | 1 +
> 3 files changed, 174 insertions(+)
> create mode 100644 tests/generic/392
> create mode 100644 tests/generic/392.out
>
> diff --git a/tests/generic/392 b/tests/generic/392
> new file mode 100644
> index 0000000..c45018a
> --- /dev/null
> +++ b/tests/generic/392
> @@ -0,0 +1,128 @@
> +#! /bin/bash
> +# FS QA Test No. generic/392
> +#
> +# Test some small truncations to check inline_data and its cached data are
> +# truncated correctly at the same time.
> +#
> +# The inline_data feature was introduced in ext4 and f2fs as follows.
> +# ext4 : http://lwn.net/Articles/468678/
> +# f2fs : http://lwn.net/Articles/573408/
> +#
> +# The basic idea is embedding small-sized file's data into relatively large
> +# inode space.
> +# In ext4, up to 132 bytes of data can be stored in 256 bytes-sized inode.
> +# In f2fs, up to 3.4KB of data can be embedded into 4KB-sized inode block.
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2014 Jaegeuk Kim. All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +_supported_fs generic
> +_supported_os Linux
> +_require_scratch
> +
> +testfile=$SCRATCH_MNT/testfile
> +OD_CMD="od -A x -t x1z"
This passed my test now. Thanks!
> +
> +_scratch_mkfs > /dev/null 2>&1
> +_scratch_mount
> +
> +# 1. make a file containing inline_data.
> +# 2. "truncated 0" is to check cached page #0 was truncated entirely.
> +# 3. "truncated 50" is to check inline_data was truncated within its inode.
> +$XFS_IO_PROG -t -f \
> + -c "pwrite -S 0x58 0 40" `# write |XXXXXXXXXXXXXXXXXXXXXXXX|` \
> + -c "fsync" \
> + -c "truncate 0" `# truncate | |` \
> + -c "truncate 50" `# truncate | |` \
> +$testfile | _filter_xfs_io
> +
> +echo "= truncate inline_data after #0 page was truncated entirely ="
> +$OD_CMD $testfile
> +_scratch_remount
Seems you missed my comments on this "_scratch_remount".
_scratch_remount without any arguments is a no-op, do you mean
_scratch_cycle_mount here?
Thanks
Eryu
next prev parent reply other threads:[~2016-11-18 6:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-17 3:47 [PATCH] generic/392: add a testcase to check some inline truncation behaviors Jaegeuk Kim
2016-11-17 9:08 ` Eryu Guan
2016-11-17 17:48 ` Jaegeuk Kim
2016-11-17 18:04 ` [PATCH v2] " Jaegeuk Kim
2016-11-18 6:43 ` Eryu Guan [this message]
2016-11-18 19:36 ` Jaegeuk Kim
2016-11-18 19:36 ` [PATCH v3] " Jaegeuk Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161118064306.GG27776@eguan.usersys.redhat.com \
--to=eguan@redhat.com \
--cc=fstests@vger.kernel.org \
--cc=jaegeuk@kernel.org \
--cc=linux-f2fs-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).