linux-f2fs-devel.lists.sourceforge.net archive mirror
 help / color / mirror / Atom feed
From: Jaegeuk Kim <jaegeuk@kernel.org>
To: Chao Yu <yuchao0@huawei.com>
Cc: linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-f2fs-devel@lists.sourceforge.net
Subject: Re: [PATCH 3/6] f2fs: remove batched discard in f2fs_trim_fs
Date: Wed, 22 Feb 2017 13:55:08 -0800	[thread overview]
Message-ID: <20170222215508.GC4003@jaegeuk.local> (raw)
In-Reply-To: <0862e43e-d045-c3de-acb1-4b75b8fcf6c6@huawei.com>

On 02/22, Chao Yu wrote:
> On 2017/1/13 6:44, Jaegeuk Kim wrote:
> > We don't need to do multiple checkpoints, since we don't actually wait for
> > completion of discard commands during checkpoint.
> > Instead, we still need to avoid very big discard commands, since that large
> > discard can interfere block allocation.
> 
> I hope we can keep this functionality and related sysfs interface, the main
> concern is that: for 16T size fragmented partition, at most there will be
> ~sizeof(u32)/2 4K blocks which could be invalid and needed to be discarded.
> After removal of in-batch discard, we have to handle billions of discard message
> with gc_mutex & cp_rwsem held, which will freeze f2fs for very long time.

The baseline of this patch is that we have a kernel thread to issue discard
commands asynchronously. So, I don't expect such the huge latency anymore.

Thanks,

> 
> So I suggest we just set trim_sections to 512 segments (covers one GB) by
> default. How do you think?
> 
> Thanks,
> 
> > 
> > Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
> > ---
> >  Documentation/ABI/testing/sysfs-fs-f2fs |  6 ------
> >  fs/f2fs/f2fs.h                          |  9 +-------
> >  fs/f2fs/segment.c                       | 38 +++++++++++----------------------
> >  fs/f2fs/super.c                         |  2 --
> >  4 files changed, 14 insertions(+), 41 deletions(-)
> > 
> > diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs
> > index a809f6005f14..df6b3f6e164a 100644
> > --- a/Documentation/ABI/testing/sysfs-fs-f2fs
> > +++ b/Documentation/ABI/testing/sysfs-fs-f2fs
> > @@ -75,12 +75,6 @@ Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
> >  Description:
> >  		 Controls the memory footprint used by f2fs.
> >  
> > -What:		/sys/fs/f2fs/<disk>/trim_sections
> > -Date:		February 2015
> > -Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
> > -Description:
> > -		 Controls the trimming rate in batch mode.
> > -
> >  What:		/sys/fs/f2fs/<disk>/cp_interval
> >  Date:		October 2015
> >  Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
> > diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
> > index 548e75d18ec1..a2850bf2a487 100644
> > --- a/fs/f2fs/f2fs.h
> > +++ b/fs/f2fs/f2fs.h
> > @@ -128,11 +128,7 @@ enum {
> >  	CP_DISCARD,
> >  };
> >  
> > -#define DEF_BATCHED_TRIM_SECTIONS	2
> > -#define BATCHED_TRIM_SEGMENTS(sbi)	\
> > -		(SM_I(sbi)->trim_sections * (sbi)->segs_per_sec)
> > -#define BATCHED_TRIM_BLOCKS(sbi)	\
> > -		(BATCHED_TRIM_SEGMENTS(sbi) << (sbi)->log_blocks_per_seg)
> > +#define MAX_DISCARD_BLOCKS(sbi) (1 << (sbi)->log_blocks_per_seg)
> >  #define DEF_CP_INTERVAL			60	/* 60 secs */
> >  #define DEF_IDLE_INTERVAL		5	/* 5 secs */
> >  
> > @@ -638,9 +634,6 @@ struct f2fs_sm_info {
> >  	int nr_discards;			/* # of discards in the list */
> >  	int max_discards;			/* max. discards to be issued */
> >  
> > -	/* for batched trimming */
> > -	unsigned int trim_sections;		/* # of sections to trim */
> > -
> >  	struct list_head sit_entry_set;	/* sit entry set list */
> >  
> >  	unsigned int ipu_policy;	/* in-place-update policy */
> > diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
> > index 73282108fa33..e6f3c6db7616 100644
> > --- a/fs/f2fs/segment.c
> > +++ b/fs/f2fs/segment.c
> > @@ -823,7 +823,8 @@ static void __add_discard_entry(struct f2fs_sb_info *sbi,
> >  	if (!list_empty(head)) {
> >  		last = list_last_entry(head, struct discard_entry, list);
> >  		if (START_BLOCK(sbi, cpc->trim_start) + start ==
> > -						last->blkaddr + last->len) {
> > +				last->blkaddr + last->len &&
> > +				last->len <= MAX_DISCARD_BLOCKS(sbi)) {
> >  			last->len += end - start;
> >  			goto done;
> >  		}
> > @@ -1513,36 +1514,25 @@ int f2fs_trim_fs(struct f2fs_sb_info *sbi, struct fstrim_range *range)
> >  			"Found FS corruption, run fsck to fix.");
> >  		goto out;
> >  	}
> > +	if (sbi->discard_blks == 0)
> > +		goto out;
> >  
> >  	/* start/end segment number in main_area */
> >  	start_segno = (start <= MAIN_BLKADDR(sbi)) ? 0 : GET_SEGNO(sbi, start);
> >  	end_segno = (end >= MAX_BLKADDR(sbi)) ? MAIN_SEGS(sbi) - 1 :
> >  						GET_SEGNO(sbi, end);
> > +	/*
> > +	 * do checkpoint to issue discard commands safely since we now can
> > +	 * use async discard.
> > +	 */
> >  	cpc.reason = CP_DISCARD;
> >  	cpc.trim_minlen = max_t(__u64, 1, F2FS_BYTES_TO_BLK(range->minlen));
> > +	cpc.trim_start = start_segno;
> > +	cpc.trim_end = end_segno;
> >  
> > -	/* do checkpoint to issue discard commands safely */
> > -	for (; start_segno <= end_segno; start_segno = cpc.trim_end + 1) {
> > -		cpc.trim_start = start_segno;
> > -
> > -		if (sbi->discard_blks == 0)
> > -			break;
> > -		else if (sbi->discard_blks < BATCHED_TRIM_BLOCKS(sbi))
> > -			cpc.trim_end = end_segno;
> > -		else
> > -			cpc.trim_end = min_t(unsigned int,
> > -				rounddown(start_segno +
> > -				BATCHED_TRIM_SEGMENTS(sbi),
> > -				sbi->segs_per_sec) - 1, end_segno);
> > -
> > -		mutex_lock(&sbi->gc_mutex);
> > -		err = write_checkpoint(sbi, &cpc);
> > -		mutex_unlock(&sbi->gc_mutex);
> > -		if (err)
> > -			break;
> > -
> > -		schedule();
> > -	}
> > +	mutex_lock(&sbi->gc_mutex);
> > +	err = write_checkpoint(sbi, &cpc);
> > +	mutex_unlock(&sbi->gc_mutex);
> >  out:
> >  	range->len = F2FS_BLK_TO_BYTES(cpc.trimmed);
> >  	return err;
> > @@ -2708,8 +2698,6 @@ int build_segment_manager(struct f2fs_sb_info *sbi)
> >  	sm_info->nr_discards = 0;
> >  	sm_info->max_discards = 0;
> >  
> > -	sm_info->trim_sections = DEF_BATCHED_TRIM_SECTIONS;
> > -
> >  	INIT_LIST_HEAD(&sm_info->sit_entry_set);
> >  
> >  	if (test_opt(sbi, FLUSH_MERGE) && !f2fs_readonly(sbi->sb)) {
> > diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
> > index 461c29043aec..37d40d8aa9c4 100644
> > --- a/fs/f2fs/super.c
> > +++ b/fs/f2fs/super.c
> > @@ -284,7 +284,6 @@ F2FS_RW_ATTR(GC_THREAD, f2fs_gc_kthread, gc_no_gc_sleep_time, no_gc_sleep_time);
> >  F2FS_RW_ATTR(GC_THREAD, f2fs_gc_kthread, gc_idle, gc_idle);
> >  F2FS_RW_ATTR(SM_INFO, f2fs_sm_info, reclaim_segments, rec_prefree_segments);
> >  F2FS_RW_ATTR(SM_INFO, f2fs_sm_info, max_small_discards, max_discards);
> > -F2FS_RW_ATTR(SM_INFO, f2fs_sm_info, batched_trim_sections, trim_sections);
> >  F2FS_RW_ATTR(SM_INFO, f2fs_sm_info, ipu_policy, ipu_policy);
> >  F2FS_RW_ATTR(SM_INFO, f2fs_sm_info, min_ipu_util, min_ipu_util);
> >  F2FS_RW_ATTR(SM_INFO, f2fs_sm_info, min_fsync_blocks, min_fsync_blocks);
> > @@ -309,7 +308,6 @@ static struct attribute *f2fs_attrs[] = {
> >  	ATTR_LIST(gc_idle),
> >  	ATTR_LIST(reclaim_segments),
> >  	ATTR_LIST(max_small_discards),
> > -	ATTR_LIST(batched_trim_sections),
> >  	ATTR_LIST(ipu_policy),
> >  	ATTR_LIST(min_ipu_util),
> >  	ATTR_LIST(min_fsync_blocks),
> > 
> 
> 
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Linux-f2fs-devel mailing list
> Linux-f2fs-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot

  reply	other threads:[~2017-02-22 21:55 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-12 22:44 [PATCH 1/6] f2fs: clean up flush/discard command namings Jaegeuk Kim
2017-01-12 22:44 ` [PATCH 2/6] f2fs: reorganize stat information Jaegeuk Kim
2017-02-22  9:40   ` Chao Yu
2017-01-12 22:44 ` [PATCH 3/6] f2fs: remove batched discard in f2fs_trim_fs Jaegeuk Kim
2017-02-22  9:40   ` Chao Yu
2017-02-22 21:55     ` Jaegeuk Kim [this message]
2017-02-23  2:19       ` Chao Yu
2017-02-23  4:25         ` Jaegeuk Kim
2017-01-12 22:44 ` [PATCH 4/6] f2fs: factor out discard command info into discard_cmd_control Jaegeuk Kim
2017-02-22  9:40   ` Chao Yu
2017-01-12 22:44 ` [PATCH 5/6] f2fs: add a kernel thread to issue discard commands asynchronously Jaegeuk Kim
2017-01-13  8:01   ` Christoph Hellwig
2017-01-13 19:12     ` Jaegeuk Kim
2017-01-16 17:32       ` Christoph Hellwig
2017-02-05  8:59         ` Christoph Hellwig
2017-02-07  3:44           ` Jaegeuk Kim
2017-02-08 16:02             ` Christoph Hellwig
2017-02-08 22:05               ` Jaegeuk Kim
2017-02-22  9:40   ` Chao Yu
2017-01-12 22:44 ` [PATCH 6/6] f2fs: show # of on-going flush and discard bios Jaegeuk Kim
2017-01-14  2:26   ` heyunlei
2017-01-14  7:27   ` [f2fs-dev] " heyunlei
2017-01-14 23:32   ` [PATCH 6/6 v2] " Jaegeuk Kim
2017-02-22  9:40   ` [PATCH 6/6] " Chao Yu
2017-02-22  9:40 ` [PATCH 1/6] f2fs: clean up flush/discard command namings Chao Yu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170222215508.GC4003@jaegeuk.local \
    --to=jaegeuk@kernel.org \
    --cc=linux-f2fs-devel@lists.sourceforge.net \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=yuchao0@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).