From: Junling Zheng <zhengjunling@huawei.com>
To: jaegeuk@kernel.org, yuchao0@huawei.com
Cc: miaoxie@huawei.com, linux-f2fs-devel@lists.sourceforge.net
Subject: [PATCH] dump.f2fs: only dump nat inside the specified nid range
Date: Fri, 29 Jun 2018 18:11:11 +0800 [thread overview]
Message-ID: <20180629101111.116032-1-zhengjunling@huawei.com> (raw)
Only dump nat info of nids inside the specified range.
Signed-off-by: Junling Zheng <zhengjunling@huawei.com>
---
fsck/dump.c | 79 ++++++++++++++++++++++++-----------------------------
fsck/fsck.h | 2 +-
fsck/main.c | 4 +--
3 files changed, 38 insertions(+), 47 deletions(-)
diff --git a/fsck/dump.c b/fsck/dump.c
index 9236a43..89cff83 100644
--- a/fsck/dump.c
+++ b/fsck/dump.c
@@ -31,32 +31,34 @@ const char *seg_type_name[SEG_TYPE_MAX + 1] = {
"SEG_TYPE_NONE",
};
-void nat_dump(struct f2fs_sb_info *sbi)
+void nat_dump(struct f2fs_sb_info *sbi, int start_nat, int end_nat)
{
- struct f2fs_super_block *sb = F2FS_RAW_SUPER(sbi);
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct f2fs_nat_block *nat_block;
struct f2fs_node *node_block;
- u32 nr_nat_blks, nid;
+ u32 nid;
pgoff_t block_off;
pgoff_t block_addr;
char buf[BUF_SZ];
int seg_off;
int fd, ret, pack;
- unsigned int i;
nat_block = (struct f2fs_nat_block *)calloc(BLOCK_SZ, 1);
node_block = (struct f2fs_node *)calloc(BLOCK_SZ, 1);
ASSERT(nat_block);
-
- nr_nat_blks = get_sb(segment_count_nat) <<
- (sbi->log_blocks_per_seg - 1);
+ ASSERT(node_block);
fd = open("dump_nat", O_CREAT|O_WRONLY|O_TRUNC, 0666);
ASSERT(fd >= 0);
- for (block_off = 0; block_off < nr_nat_blks; pack = 1, block_off++) {
+ for (nid = start_nat; nid < end_nat; pack = 1, nid++) {
+ struct f2fs_nat_entry raw_nat;
+ struct node_info ni;
+ if(nid == 0 || nid == 1 || nid == 2 )
+ continue;
+ ni.nid = nid;
+ block_off = nid / NAT_ENTRY_PER_BLOCK;
seg_off = block_off >> sbi->log_blocks_per_seg;
block_addr = (pgoff_t)(nm_i->nat_blkaddr +
(seg_off << sbi->log_blocks_per_seg << 1) +
@@ -67,42 +69,11 @@ void nat_dump(struct f2fs_sb_info *sbi)
pack = 2;
}
- ret = dev_read_block(nat_block, block_addr);
- ASSERT(ret >= 0);
-
- nid = block_off * NAT_ENTRY_PER_BLOCK;
- for (i = 0; i < NAT_ENTRY_PER_BLOCK; i++) {
- struct f2fs_nat_entry raw_nat;
- struct node_info ni;
- ni.nid = nid + i;
-
- if(nid + i == 0 || nid + i == 1 || nid + i == 2 )
- continue;
- if (lookup_nat_in_journal(sbi, nid + i,
- &raw_nat) >= 0) {
- node_info_from_raw_nat(&ni, &raw_nat);
- ret = dev_read_block(node_block, ni.blk_addr);
- ASSERT(ret >= 0);
- if (ni.blk_addr != 0x0) {
- memset(buf, 0, BUF_SZ);
- snprintf(buf, BUF_SZ,
- "nid:%5u\tino:%5u\toffset:%5u"
- "\tblkaddr:%10u\tpack:%d\n",
- ni.nid, ni.ino,
- le32_to_cpu(node_block->footer.flag) >>
- OFFSET_BIT_SHIFT,
- ni.blk_addr, pack);
- ret = write(fd, buf, strlen(buf));
- ASSERT(ret >= 0);
- }
- } else {
- node_info_from_raw_nat(&ni,
- &nat_block->entries[i]);
- if (ni.blk_addr == 0)
- continue;
-
- ret = dev_read_block(node_block, ni.blk_addr);
- ASSERT(ret >= 0);
+ if (lookup_nat_in_journal(sbi, nid, &raw_nat) >= 0) {
+ node_info_from_raw_nat(&ni, &raw_nat);
+ ret = dev_read_block(node_block, ni.blk_addr);
+ ASSERT(ret >= 0);
+ if (ni.blk_addr != 0x0) {
memset(buf, 0, BUF_SZ);
snprintf(buf, BUF_SZ,
"nid:%5u\tino:%5u\toffset:%5u"
@@ -114,6 +85,26 @@ void nat_dump(struct f2fs_sb_info *sbi)
ret = write(fd, buf, strlen(buf));
ASSERT(ret >= 0);
}
+ } else {
+ ret = dev_read_block(nat_block, block_addr);
+ ASSERT(ret >= 0);
+ node_info_from_raw_nat(&ni,
+ &nat_block->entries[nid % NAT_ENTRY_PER_BLOCK]);
+ if (ni.blk_addr == 0)
+ continue;
+
+ ret = dev_read_block(node_block, ni.blk_addr);
+ ASSERT(ret >= 0);
+ memset(buf, 0, BUF_SZ);
+ snprintf(buf, BUF_SZ,
+ "nid:%5u\tino:%5u\toffset:%5u"
+ "\tblkaddr:%10u\tpack:%d\n",
+ ni.nid, ni.ino,
+ le32_to_cpu(node_block->footer.flag) >>
+ OFFSET_BIT_SHIFT,
+ ni.blk_addr, pack);
+ ret = write(fd, buf, strlen(buf));
+ ASSERT(ret >= 0);
}
}
diff --git a/fsck/fsck.h b/fsck/fsck.h
index 5530aff..0916e30 100644
--- a/fsck/fsck.h
+++ b/fsck/fsck.h
@@ -206,7 +206,7 @@ struct dump_option {
int32_t blk_addr;
};
-extern void nat_dump(struct f2fs_sb_info *);
+extern void nat_dump(struct f2fs_sb_info *, int, int);
extern void sit_dump(struct f2fs_sb_info *, unsigned int, unsigned int);
extern void ssa_dump(struct f2fs_sb_info *, int, int);
extern void dump_node(struct f2fs_sb_info *, nid_t, int);
diff --git a/fsck/main.c b/fsck/main.c
index f6d12b0..714e28a 100644
--- a/fsck/main.c
+++ b/fsck/main.c
@@ -73,7 +73,7 @@ void dump_usage()
MSG(0, "[options]:\n");
MSG(0, " -d debug level [default:0]\n");
MSG(0, " -i inode no (hex)\n");
- MSG(0, " -n [NAT dump segno from #1~#2 (decimal), for all 0~-1]\n");
+ MSG(0, " -n [NAT dump nid from #1~#2 (decimal), for all 0~-1]\n");
MSG(0, " -s [SIT dump segno from #1~#2 (decimal), for all 0~-1]\n");
MSG(0, " -S sparse_mode\n");
MSG(0, " -a [SSA dump segno from #1~#2 (decimal), for all 0~-1]\n");
@@ -645,7 +645,7 @@ static void do_dump(struct f2fs_sb_info *sbi)
if (opt->end_ssa == -1)
opt->end_ssa = SM_I(sbi)->main_segments;
if (opt->start_nat != -1)
- nat_dump(sbi);
+ nat_dump(sbi, opt->start_nat, opt->end_nat);
if (opt->start_sit != -1)
sit_dump(sbi, opt->start_sit, opt->end_sit);
if (opt->start_ssa != -1)
--
2.18.0
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
next reply other threads:[~2018-06-29 10:13 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-29 10:11 Junling Zheng [this message]
2018-07-01 2:22 ` [PATCH] dump.f2fs: only dump nat inside the specified nid range Chao Yu
2018-07-02 2:09 ` Junling Zheng
2018-07-02 2:43 ` Chao Yu
2018-07-02 3:25 ` Junling Zheng
2018-07-02 3:39 ` Chao Yu
2018-07-02 3:59 ` [PATCH v2] " Junling Zheng
2018-07-02 6:12 ` Chao Yu
2018-07-02 9:22 ` [PATCH v3] " Junling Zheng
2018-07-02 11:21 ` Chao Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180629101111.116032-1-zhengjunling@huawei.com \
--to=zhengjunling@huawei.com \
--cc=jaegeuk@kernel.org \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=miaoxie@huawei.com \
--cc=yuchao0@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).