From: Chao Yu <yuchao0@huawei.com>
To: jaegeuk@kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net,
linux-kernel@vger.kernel.org, chao@kernel.org,
Chao Yu <yuchao0@huawei.com>
Subject: [PATCH 3/4] f2fs: fix avoid race between truncate and background GC
Date: Fri, 27 Jul 2018 18:15:15 +0800 [thread overview]
Message-ID: <20180727101516.41403-3-yuchao0@huawei.com> (raw)
In-Reply-To: <20180727101516.41403-1-yuchao0@huawei.com>
Thread A Background GC
- f2fs_setattr isize to 0
- truncate_setsize
- gc_data_segment
- f2fs_get_read_data_page page #0
- set_page_dirty
- set_cold_data
- f2fs_truncate
- f2fs_setattr isize to 4k
- read 4k <--- hit data in cached page #0
Above race condition can cause read out invalid data in a truncated
page, fix it by i_gc_rwsem[WRITE] lock.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
---
fs/f2fs/data.c | 4 ++++
fs/f2fs/file.c | 33 +++++++++++++++++++--------------
2 files changed, 23 insertions(+), 14 deletions(-)
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 071224ded5f4..a29f3162b887 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -2214,10 +2214,14 @@ static void f2fs_write_failed(struct address_space *mapping, loff_t to)
loff_t i_size = i_size_read(inode);
if (to > i_size) {
+ down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
down_write(&F2FS_I(inode)->i_mmap_sem);
+
truncate_pagecache(inode, i_size);
f2fs_truncate_blocks(inode, i_size, true);
+
up_write(&F2FS_I(inode)->i_mmap_sem);
+ up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
}
}
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 7bd2412a8c37..ed5c9b0e0d0c 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -796,22 +796,25 @@ int f2fs_setattr(struct dentry *dentry, struct iattr *attr)
}
if (attr->ia_valid & ATTR_SIZE) {
- if (attr->ia_size <= i_size_read(inode)) {
- down_write(&F2FS_I(inode)->i_mmap_sem);
- truncate_setsize(inode, attr->ia_size);
+ bool to_smaller = (attr->ia_size <= i_size_read(inode));
+
+ down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
+ down_write(&F2FS_I(inode)->i_mmap_sem);
+
+ truncate_setsize(inode, attr->ia_size);
+
+ if (to_smaller)
err = f2fs_truncate(inode);
- up_write(&F2FS_I(inode)->i_mmap_sem);
- if (err)
- return err;
- } else {
- /*
- * do not trim all blocks after i_size if target size is
- * larger than i_size.
- */
- down_write(&F2FS_I(inode)->i_mmap_sem);
- truncate_setsize(inode, attr->ia_size);
- up_write(&F2FS_I(inode)->i_mmap_sem);
+ /*
+ * do not trim all blocks after i_size if target size is
+ * larger than i_size.
+ */
+ up_write(&F2FS_I(inode)->i_mmap_sem);
+ up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
+ if (err)
+ return err;
+ if (!to_smaller) {
/* should convert inline inode here */
if (!f2fs_may_inline_data(inode)) {
err = f2fs_convert_inline_inode(inode);
@@ -958,6 +961,7 @@ static int punch_hole(struct inode *inode, loff_t offset, loff_t len)
blk_start = (loff_t)pg_start << PAGE_SHIFT;
blk_end = (loff_t)pg_end << PAGE_SHIFT;
+ down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
down_write(&F2FS_I(inode)->i_mmap_sem);
truncate_inode_pages_range(mapping, blk_start,
blk_end - 1);
@@ -966,6 +970,7 @@ static int punch_hole(struct inode *inode, loff_t offset, loff_t len)
ret = f2fs_truncate_hole(inode, pg_start, pg_end);
f2fs_unlock_op(sbi);
up_write(&F2FS_I(inode)->i_mmap_sem);
+ up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
}
}
--
2.18.0.rc1
next prev parent reply other threads:[~2018-07-27 10:15 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-27 10:15 [PATCH 1/4] f2fs: don't keep meta pages used for block migration Chao Yu
2018-07-27 10:15 ` [PATCH 2/4] f2fs: fix to active page in lru list for read path Chao Yu
2018-07-27 10:15 ` Chao Yu [this message]
2018-07-29 1:58 ` [PATCH 3/4] f2fs: fix avoid race between truncate and background GC Jaegeuk Kim
2018-07-29 6:02 ` Chao Yu
2018-07-29 6:13 ` Jaegeuk Kim
2018-07-29 6:16 ` Chao Yu
2018-07-27 10:15 ` [PATCH 4/4] f2fs: fix to spread clear_cold_data() Chao Yu
2018-07-29 2:00 ` Jaegeuk Kim
2018-07-29 2:19 ` Chao Yu
2018-07-29 2:44 ` Jaegeuk Kim
2018-07-29 3:19 ` Chao Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180727101516.41403-3-yuchao0@huawei.com \
--to=yuchao0@huawei.com \
--cc=chao@kernel.org \
--cc=jaegeuk@kernel.org \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).