From: Chao Yu <chao@kernel.org>
To: fstests@vger.kernel.org
Cc: guaneryu@gmail.com, linux-f2fs-devel@lists.sourceforge.net
Subject: [PATCH v2 3/3] generic: test creation time recovery after power failure
Date: Sun, 7 Oct 2018 20:25:48 +0800 [thread overview]
Message-ID: <20181007122548.21876-3-chao@kernel.org> (raw)
In-Reply-To: <20181007122548.21876-1-chao@kernel.org>
From: Chao Yu <yuchao0@huawei.com>
After fsync, filesystem should guarantee inode metadata including
creation time being persisted, so even after sudden power-cut, during
mount, we should recover i_crtime_{,nsec} fields correctly, in order
to not loss those meta info.
So adding this testcase to check whether generic filesystem can
guarantee that.
Note that, it needs inode creation time support on specified filesystem.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
---
v2:
- remove unneeded './common/quota"
- add missing _require_statx
- add a helper _require_btime to check inode creation time support.
- fix wrong comments
- use -f parameter for rm
common/rc | 11 +++++
tests/generic/508 | 96 +++++++++++++++++++++++++++++++++++++++++++
tests/generic/508.out | 2 +
tests/generic/group | 1 +
4 files changed, 110 insertions(+)
create mode 100755 tests/generic/508
create mode 100644 tests/generic/508.out
diff --git a/common/rc b/common/rc
index c8cccb38..6ab5b066 100644
--- a/common/rc
+++ b/common/rc
@@ -3835,6 +3835,17 @@ _dmsetup_create()
$UDEV_SETTLE_PROG >/dev/null 2>&1
}
+_require_btime()
+{
+ local mnt_point=${!#}
+ _get_mount $*
+ $XFS_IO_PROG -f $mnt_point/test_creation_time -c "statx -v" \
+ | grep btime >>$seqres.full 2>&1 || \
+ _notrun "inode creation time not supported by this filesystem"
+ rm -f $mnt_point/test_creation_time
+ _put_mount
+}
+
init_rc
################################################################################
diff --git a/tests/generic/508 b/tests/generic/508
new file mode 100755
index 00000000..9d6ec9f6
--- /dev/null
+++ b/tests/generic/508
@@ -0,0 +1,96 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2018 Huawei. All Rights Reserved.
+#
+# FS QA Test 508
+#
+# This testcase is trying to test recovery flow of generic filesystem, it needs
+# creation time support on specified filesystem.
+# With below steps, once the file is created, creation time attribute should be
+# valid on the file, after we fsync that file, it expects creation time can be
+# recovered after sudden power-cuts.
+# 1. touch testfile;
+# 1.1 sync (optional)
+# 2. xfs_io -f testfile -c "fsync";
+# 3. godown;
+# 4. umount;
+# 5. mount;
+# 6. check creation time
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+
+_require_test_lsattr
+_require_statx
+_require_xfs_io_command "statx" "-v"
+
+_require_scratch
+_require_scratch_shutdown
+_require_btime $SCRATCH_DEV $SCRATCH_MNT
+
+_scratch_mkfs >/dev/null 2>&1
+_require_metadata_journaling $SCRATCH_DEV
+
+testfile=$SCRATCH_MNT/testfile
+
+do_check()
+{
+ _scratch_mount
+
+ touch $testfile
+
+ if [ "$1" == "sync" ]; then
+ sync
+ fi
+
+ before=`$XFS_IO_PROG -f $testfile -c "statx -v" | grep btime`
+
+ $XFS_IO_PROG -f $testfile -c "fsync" | _filter_xfs_io
+
+ _scratch_shutdown | tee -a $seqres.full
+ _scratch_cycle_mount
+
+ after=`$XFS_IO_PROG -f $testfile -c "statx -v" | grep btime`
+
+ # check inode's creation time
+ if [ "$before" != "$after" ]; then
+ echo "Before: $before"
+ echo "After : $after"
+ fi
+ echo "Before: $before" >> $seqres.full
+ echo "After : $after" >> $seqres.full
+
+ rm -f $testfile
+ _scratch_unmount
+}
+
+echo "Silence is golden"
+
+do_check
+do_check sync
+
+status=0
+exit
diff --git a/tests/generic/508.out b/tests/generic/508.out
new file mode 100644
index 00000000..a5ceec05
--- /dev/null
+++ b/tests/generic/508.out
@@ -0,0 +1,2 @@
+QA output created by 508
+Silence is golden
diff --git a/tests/generic/group b/tests/generic/group
index e94253dc..8f26ee6a 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -510,3 +510,4 @@
505 shutdown auto quick metadata
506 shutdown auto quick metadata quota
507 shutdown auto quick metadata
+508 shutdown auto quick metadata
--
2.18.0
prev parent reply other threads:[~2018-10-07 14:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-07 12:25 [PATCH v2 1/3] generic: test project id recovery after power failure Chao Yu
2018-10-07 12:25 ` [PATCH v2 2/3] generic: test i_flags " Chao Yu
2018-10-07 12:25 ` Chao Yu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181007122548.21876-3-chao@kernel.org \
--to=chao@kernel.org \
--cc=fstests@vger.kernel.org \
--cc=guaneryu@gmail.com \
--cc=linux-f2fs-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).