From: Eric Biggers <ebiggers@kernel.org>
To: linux-fscrypt@vger.kernel.org
Cc: ceph-devel@vger.kernel.org, linux-ext4@vger.kernel.org,
linux-mtd@lists.infradead.org,
linux-f2fs-devel@lists.sourceforge.net
Subject: [f2fs-dev] [PATCH] fscrypt: split up FS_CRYPTO_BLOCK_SIZE
Date: Mon, 4 Apr 2022 18:09:14 -0700 [thread overview]
Message-ID: <20220405010914.18519-1-ebiggers@kernel.org> (raw)
From: Eric Biggers <ebiggers@google.com>
FS_CRYPTO_BLOCK_SIZE is neither the filesystem block size nor the
granularity of encryption. Rather, it defines two logically separate
constraints that both arise from the block size of the AES cipher:
- The alignment required for the lengths of file contents blocks
- The minimum input/output length for the filenames encryption modes
Since there are way too many things called the "block size", and the
connection with the AES block size is not easily understood, split
FS_CRYPTO_BLOCK_SIZE into two constants FSCRYPT_CONTENTS_ALIGNMENT and
FSCRYPT_FNAME_MIN_MSG_LEN that more clearly describe what they are.
Signed-off-by: Eric Biggers <ebiggers@google.com>
---
fs/crypto/crypto.c | 10 +++++-----
fs/crypto/fname.c | 11 +++++++++--
fs/ubifs/ubifs.h | 2 +-
include/linux/fscrypt.h | 12 +++++++++++-
4 files changed, 26 insertions(+), 9 deletions(-)
diff --git a/fs/crypto/crypto.c b/fs/crypto/crypto.c
index 526a4c1bed994..e78be66bbf015 100644
--- a/fs/crypto/crypto.c
+++ b/fs/crypto/crypto.c
@@ -113,7 +113,7 @@ int fscrypt_crypt_block(const struct inode *inode, fscrypt_direction_t rw,
if (WARN_ON_ONCE(len <= 0))
return -EINVAL;
- if (WARN_ON_ONCE(len % FS_CRYPTO_BLOCK_SIZE != 0))
+ if (WARN_ON_ONCE(len % FSCRYPT_CONTENTS_ALIGNMENT != 0))
return -EINVAL;
fscrypt_generate_iv(&iv, lblk_num, ci);
@@ -213,8 +213,8 @@ EXPORT_SYMBOL(fscrypt_encrypt_pagecache_blocks);
* fscrypt_encrypt_block_inplace() - Encrypt a filesystem block in-place
* @inode: The inode to which this block belongs
* @page: The page containing the block to encrypt
- * @len: Size of block to encrypt. Doesn't need to be a multiple of the
- * fs block size, but must be a multiple of FS_CRYPTO_BLOCK_SIZE.
+ * @len: Size of block to encrypt. This must be a multiple of
+ * FSCRYPT_CONTENTS_ALIGNMENT.
* @offs: Byte offset within @page at which the block to encrypt begins
* @lblk_num: Filesystem logical block number of the block, i.e. the 0-based
* number of the block within the file
@@ -283,8 +283,8 @@ EXPORT_SYMBOL(fscrypt_decrypt_pagecache_blocks);
* fscrypt_decrypt_block_inplace() - Decrypt a filesystem block in-place
* @inode: The inode to which this block belongs
* @page: The page containing the block to decrypt
- * @len: Size of block to decrypt. Doesn't need to be a multiple of the
- * fs block size, but must be a multiple of FS_CRYPTO_BLOCK_SIZE.
+ * @len: Size of block to decrypt. This must be a multiple of
+ * FSCRYPT_CONTENTS_ALIGNMENT.
* @offs: Byte offset within @page at which the block to decrypt begins
* @lblk_num: Filesystem logical block number of the block, i.e. the 0-based
* number of the block within the file
diff --git a/fs/crypto/fname.c b/fs/crypto/fname.c
index a9be4bc74a94a..14e0ef5e9a20a 100644
--- a/fs/crypto/fname.c
+++ b/fs/crypto/fname.c
@@ -18,6 +18,13 @@
#include <crypto/skcipher.h>
#include "fscrypt_private.h"
+/*
+ * The minimum message length (input and output length), in bytes, for all
+ * filenames encryption modes. Filenames shorter than this will be zero-padded
+ * before being encrypted.
+ */
+#define FSCRYPT_FNAME_MIN_MSG_LEN 16
+
/*
* struct fscrypt_nokey_name - identifier for directory entry when key is absent
*
@@ -267,7 +274,7 @@ bool fscrypt_fname_encrypted_size(const union fscrypt_policy *policy,
if (orig_len > max_len)
return false;
- encrypted_len = max(orig_len, (u32)FS_CRYPTO_BLOCK_SIZE);
+ encrypted_len = max_t(u32, orig_len, FSCRYPT_FNAME_MIN_MSG_LEN);
encrypted_len = round_up(encrypted_len, padding);
*encrypted_len_ret = min(encrypted_len, max_len);
return true;
@@ -350,7 +357,7 @@ int fscrypt_fname_disk_to_usr(const struct inode *inode,
return 0;
}
- if (iname->len < FS_CRYPTO_BLOCK_SIZE)
+ if (iname->len < FSCRYPT_FNAME_MIN_MSG_LEN)
return -EUCLEAN;
if (fscrypt_has_encryption_key(inode))
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index 008fa46ef61e7..7d6d2f152e039 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -132,7 +132,7 @@
#define WORST_COMPR_FACTOR 2
#ifdef CONFIG_FS_ENCRYPTION
-#define UBIFS_CIPHER_BLOCK_SIZE FS_CRYPTO_BLOCK_SIZE
+#define UBIFS_CIPHER_BLOCK_SIZE FSCRYPT_CONTENTS_ALIGNMENT
#else
#define UBIFS_CIPHER_BLOCK_SIZE 0
#endif
diff --git a/include/linux/fscrypt.h b/include/linux/fscrypt.h
index 50d92d805bd8c..efc7f96e5e26b 100644
--- a/include/linux/fscrypt.h
+++ b/include/linux/fscrypt.h
@@ -18,7 +18,17 @@
#include <linux/slab.h>
#include <uapi/linux/fscrypt.h>
-#define FS_CRYPTO_BLOCK_SIZE 16
+/*
+ * The lengths of all file contents blocks must be divisible by this value.
+ * This is needed to ensure that all contents encryption modes will work, as
+ * some of the supported modes don't support arbitrarily byte-aligned messages.
+ *
+ * Since the needed alignment is 16 bytes, most filesystems will meet this
+ * requirement naturally, as typical block sizes are powers of 2. However, if a
+ * filesystem can generate arbitrarily byte-aligned block lengths (e.g., via
+ * compression), then it will need to pad to this alignment before encryption.
+ */
+#define FSCRYPT_CONTENTS_ALIGNMENT 16
union fscrypt_policy;
struct fscrypt_info;
--
2.35.1
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
next reply other threads:[~2022-04-05 1:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-05 1:09 Eric Biggers [this message]
2022-04-14 5:31 ` [f2fs-dev] [PATCH] fscrypt: split up FS_CRYPTO_BLOCK_SIZE Eric Biggers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220405010914.18519-1-ebiggers@kernel.org \
--to=ebiggers@kernel.org \
--cc=ceph-devel@vger.kernel.org \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=linux-fscrypt@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).