* Re: [PATCH] f2fs-tools: fix overflow bug of start_sector when computing zone_align_start_offset
2018-05-26 8:09 [PATCH] f2fs-tools: fix overflow bug of start_sector when computing zone_align_start_offset Yunlong Song
@ 2018-05-26 11:27 ` Junling Zheng
2018-05-27 13:41 ` Yunlong Song
2018-05-28 7:29 ` Chao Yu
2018-05-30 6:58 ` [PATCH rebase] " Yunlong Song
2 siblings, 1 reply; 7+ messages in thread
From: Junling Zheng @ 2018-05-26 11:27 UTC (permalink / raw)
To: Yunlong Song, jaegeuk, chao, yuchao0, yunlong.song
Cc: miaoxie, linux-kernel, linux-f2fs-devel
No neet to change zone_align_start_offset to u64, because zone_align_start_offset is always
smaller than zone_size_bytes, which is u32.
Thanks,
Junling
On 2018/5/26 16:09, Yunlong Song wrote:
> zone_align_start_offset should be u64, but config.start_sector is u32,
> so it may be overflow when computing zone_align_start_offset.
>
> Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
> ---
> fsck/resize.c | 7 ++++---
> mkfs/f2fs_format.c | 4 ++--
> 2 files changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/fsck/resize.c b/fsck/resize.c
> index d285dd7..8ac7d45 100644
> --- a/fsck/resize.c
> +++ b/fsck/resize.c
> @@ -11,7 +11,8 @@
>
> static int get_new_sb(struct f2fs_super_block *sb)
> {
> - u_int32_t zone_size_bytes, zone_align_start_offset;
> + u_int32_t zone_size_bytes;
> + u_int64_t zone_align_start_offset;
> u_int32_t blocks_for_sit, blocks_for_nat, blocks_for_ssa;
> u_int32_t sit_segments, nat_segments, diff, total_meta_segments;
> u_int32_t total_valid_blks_available;
> @@ -27,10 +28,10 @@ static int get_new_sb(struct f2fs_super_block *sb)
>
> zone_size_bytes = segment_size_bytes * segs_per_zone;
> zone_align_start_offset =
> - (c.start_sector * c.sector_size +
> + ((u_int64_t) c.start_sector * c.sector_size +
> 2 * F2FS_BLKSIZE + zone_size_bytes - 1) /
> zone_size_bytes * zone_size_bytes -
> - c.start_sector * c.sector_size;
> + (u_int64_t) c.start_sector * c.sector_size;
>
> set_sb(segment_count, (c.target_sectors * c.sector_size -
> zone_align_start_offset) / segment_size_bytes /
> diff --git a/mkfs/f2fs_format.c b/mkfs/f2fs_format.c
> index 0a99a77..f045e23 100644
> --- a/mkfs/f2fs_format.c
> +++ b/mkfs/f2fs_format.c
> @@ -212,10 +212,10 @@ static int f2fs_prepare_super_block(void)
> set_sb(block_count, c.total_sectors >> log_sectors_per_block);
>
> zone_align_start_offset =
> - (c.start_sector * c.sector_size +
> + ((u_int64_t) c.start_sector * c.sector_size +
> 2 * F2FS_BLKSIZE + zone_size_bytes - 1) /
> zone_size_bytes * zone_size_bytes -
> - c.start_sector * c.sector_size;
> + (u_int64_t) c.start_sector * c.sector_size;
>
> if (c.start_sector % c.sectors_per_blk) {
> MSG(1, "\t%s: Align start sector number to the page unit\n",
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH] f2fs-tools: fix overflow bug of start_sector when computing zone_align_start_offset
2018-05-26 11:27 ` Junling Zheng
@ 2018-05-27 13:41 ` Yunlong Song
0 siblings, 0 replies; 7+ messages in thread
From: Yunlong Song @ 2018-05-27 13:41 UTC (permalink / raw)
To: Junling Zheng, jaegeuk, chao, yuchao0, yunlong.song
Cc: miaoxie, linux-kernel, linux-f2fs-devel
Just keep it same with u_int64_t defined in mkfs/f2fs_format.c, and
c.start_sector * c.sector_size
may be u32 overflow, so add (u_int64_t) before c.start_sector *
c.sector_size and change the target
value zone_align_start_offset to (u_int64_t).
On 2018/5/26 19:27, Junling Zheng wrote:
> No neet to change zone_align_start_offset to u64, because zone_align_start_offset is always
> smaller than zone_size_bytes, which is u32.
>
> Thanks,
> Junling
>
> On 2018/5/26 16:09, Yunlong Song wrote:
>> zone_align_start_offset should be u64, but config.start_sector is u32,
>> so it may be overflow when computing zone_align_start_offset.
>>
>> Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
>> ---
>> fsck/resize.c | 7 ++++---
>> mkfs/f2fs_format.c | 4 ++--
>> 2 files changed, 6 insertions(+), 5 deletions(-)
>>
>> diff --git a/fsck/resize.c b/fsck/resize.c
>> index d285dd7..8ac7d45 100644
>> --- a/fsck/resize.c
>> +++ b/fsck/resize.c
>> @@ -11,7 +11,8 @@
>>
>> static int get_new_sb(struct f2fs_super_block *sb)
>> {
>> - u_int32_t zone_size_bytes, zone_align_start_offset;
>> + u_int32_t zone_size_bytes;
>> + u_int64_t zone_align_start_offset;
>> u_int32_t blocks_for_sit, blocks_for_nat, blocks_for_ssa;
>> u_int32_t sit_segments, nat_segments, diff, total_meta_segments;
>> u_int32_t total_valid_blks_available;
>> @@ -27,10 +28,10 @@ static int get_new_sb(struct f2fs_super_block *sb)
>>
>> zone_size_bytes = segment_size_bytes * segs_per_zone;
>> zone_align_start_offset =
>> - (c.start_sector * c.sector_size +
>> + ((u_int64_t) c.start_sector * c.sector_size +
>> 2 * F2FS_BLKSIZE + zone_size_bytes - 1) /
>> zone_size_bytes * zone_size_bytes -
>> - c.start_sector * c.sector_size;
>> + (u_int64_t) c.start_sector * c.sector_size;
>>
>> set_sb(segment_count, (c.target_sectors * c.sector_size -
>> zone_align_start_offset) / segment_size_bytes /
>> diff --git a/mkfs/f2fs_format.c b/mkfs/f2fs_format.c
>> index 0a99a77..f045e23 100644
>> --- a/mkfs/f2fs_format.c
>> +++ b/mkfs/f2fs_format.c
>> @@ -212,10 +212,10 @@ static int f2fs_prepare_super_block(void)
>> set_sb(block_count, c.total_sectors >> log_sectors_per_block);
>>
>> zone_align_start_offset =
>> - (c.start_sector * c.sector_size +
>> + ((u_int64_t) c.start_sector * c.sector_size +
>> 2 * F2FS_BLKSIZE + zone_size_bytes - 1) /
>> zone_size_bytes * zone_size_bytes -
>> - c.start_sector * c.sector_size;
>> + (u_int64_t) c.start_sector * c.sector_size;
>>
>> if (c.start_sector % c.sectors_per_blk) {
>> MSG(1, "\t%s: Align start sector number to the page unit\n",
>>
>
>
> .
>
--
Thanks,
Yunlong Song
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] f2fs-tools: fix overflow bug of start_sector when computing zone_align_start_offset
2018-05-26 8:09 [PATCH] f2fs-tools: fix overflow bug of start_sector when computing zone_align_start_offset Yunlong Song
2018-05-26 11:27 ` Junling Zheng
@ 2018-05-28 7:29 ` Chao Yu
2018-05-30 2:33 ` Jaegeuk Kim
2018-05-30 6:58 ` [PATCH rebase] " Yunlong Song
2 siblings, 1 reply; 7+ messages in thread
From: Chao Yu @ 2018-05-28 7:29 UTC (permalink / raw)
To: Yunlong Song, jaegeuk, chao, yunlong.song
Cc: linux-kernel, linux-f2fs-devel, miaoxie
On 2018/5/26 16:09, Yunlong Song wrote:
> zone_align_start_offset should be u64, but config.start_sector is u32,
> so it may be overflow when computing zone_align_start_offset.
Could you rebase this patch on top of "f2fs-tools: fix to match with the
start_sector"?
Thanks,
>
> Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
> ---
> fsck/resize.c | 7 ++++---
> mkfs/f2fs_format.c | 4 ++--
> 2 files changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/fsck/resize.c b/fsck/resize.c
> index d285dd7..8ac7d45 100644
> --- a/fsck/resize.c
> +++ b/fsck/resize.c
> @@ -11,7 +11,8 @@
>
> static int get_new_sb(struct f2fs_super_block *sb)
> {
> - u_int32_t zone_size_bytes, zone_align_start_offset;
> + u_int32_t zone_size_bytes;
> + u_int64_t zone_align_start_offset;
> u_int32_t blocks_for_sit, blocks_for_nat, blocks_for_ssa;
> u_int32_t sit_segments, nat_segments, diff, total_meta_segments;
> u_int32_t total_valid_blks_available;
> @@ -27,10 +28,10 @@ static int get_new_sb(struct f2fs_super_block *sb)
>
> zone_size_bytes = segment_size_bytes * segs_per_zone;
> zone_align_start_offset =
> - (c.start_sector * c.sector_size +
> + ((u_int64_t) c.start_sector * c.sector_size +
> 2 * F2FS_BLKSIZE + zone_size_bytes - 1) /
> zone_size_bytes * zone_size_bytes -
> - c.start_sector * c.sector_size;
> + (u_int64_t) c.start_sector * c.sector_size;
>
> set_sb(segment_count, (c.target_sectors * c.sector_size -
> zone_align_start_offset) / segment_size_bytes /
> diff --git a/mkfs/f2fs_format.c b/mkfs/f2fs_format.c
> index 0a99a77..f045e23 100644
> --- a/mkfs/f2fs_format.c
> +++ b/mkfs/f2fs_format.c
> @@ -212,10 +212,10 @@ static int f2fs_prepare_super_block(void)
> set_sb(block_count, c.total_sectors >> log_sectors_per_block);
>
> zone_align_start_offset =
> - (c.start_sector * c.sector_size +
> + ((u_int64_t) c.start_sector * c.sector_size +
> 2 * F2FS_BLKSIZE + zone_size_bytes - 1) /
> zone_size_bytes * zone_size_bytes -
> - c.start_sector * c.sector_size;
> + (u_int64_t) c.start_sector * c.sector_size;
>
> if (c.start_sector % c.sectors_per_blk) {
> MSG(1, "\t%s: Align start sector number to the page unit\n",
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH] f2fs-tools: fix overflow bug of start_sector when computing zone_align_start_offset
2018-05-28 7:29 ` Chao Yu
@ 2018-05-30 2:33 ` Jaegeuk Kim
0 siblings, 0 replies; 7+ messages in thread
From: Jaegeuk Kim @ 2018-05-30 2:33 UTC (permalink / raw)
To: Chao Yu; +Cc: yunlong.song, linux-kernel, linux-f2fs-devel, miaoxie
On 05/28, Chao Yu wrote:
> On 2018/5/26 16:09, Yunlong Song wrote:
> > zone_align_start_offset should be u64, but config.start_sector is u32,
> > so it may be overflow when computing zone_align_start_offset.
>
> Could you rebase this patch on top of "f2fs-tools: fix to match with the
> start_sector"?
Yes, please. I updated dev-test. :P
>
> Thanks,
>
> >
> > Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
> > ---
> > fsck/resize.c | 7 ++++---
> > mkfs/f2fs_format.c | 4 ++--
> > 2 files changed, 6 insertions(+), 5 deletions(-)
> >
> > diff --git a/fsck/resize.c b/fsck/resize.c
> > index d285dd7..8ac7d45 100644
> > --- a/fsck/resize.c
> > +++ b/fsck/resize.c
> > @@ -11,7 +11,8 @@
> >
> > static int get_new_sb(struct f2fs_super_block *sb)
> > {
> > - u_int32_t zone_size_bytes, zone_align_start_offset;
> > + u_int32_t zone_size_bytes;
> > + u_int64_t zone_align_start_offset;
> > u_int32_t blocks_for_sit, blocks_for_nat, blocks_for_ssa;
> > u_int32_t sit_segments, nat_segments, diff, total_meta_segments;
> > u_int32_t total_valid_blks_available;
> > @@ -27,10 +28,10 @@ static int get_new_sb(struct f2fs_super_block *sb)
> >
> > zone_size_bytes = segment_size_bytes * segs_per_zone;
> > zone_align_start_offset =
> > - (c.start_sector * c.sector_size +
> > + ((u_int64_t) c.start_sector * c.sector_size +
> > 2 * F2FS_BLKSIZE + zone_size_bytes - 1) /
> > zone_size_bytes * zone_size_bytes -
> > - c.start_sector * c.sector_size;
> > + (u_int64_t) c.start_sector * c.sector_size;
> >
> > set_sb(segment_count, (c.target_sectors * c.sector_size -
> > zone_align_start_offset) / segment_size_bytes /
> > diff --git a/mkfs/f2fs_format.c b/mkfs/f2fs_format.c
> > index 0a99a77..f045e23 100644
> > --- a/mkfs/f2fs_format.c
> > +++ b/mkfs/f2fs_format.c
> > @@ -212,10 +212,10 @@ static int f2fs_prepare_super_block(void)
> > set_sb(block_count, c.total_sectors >> log_sectors_per_block);
> >
> > zone_align_start_offset =
> > - (c.start_sector * c.sector_size +
> > + ((u_int64_t) c.start_sector * c.sector_size +
> > 2 * F2FS_BLKSIZE + zone_size_bytes - 1) /
> > zone_size_bytes * zone_size_bytes -
> > - c.start_sector * c.sector_size;
> > + (u_int64_t) c.start_sector * c.sector_size;
> >
> > if (c.start_sector % c.sectors_per_blk) {
> > MSG(1, "\t%s: Align start sector number to the page unit\n",
> >
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH rebase] f2fs-tools: fix overflow bug of start_sector when computing zone_align_start_offset
2018-05-26 8:09 [PATCH] f2fs-tools: fix overflow bug of start_sector when computing zone_align_start_offset Yunlong Song
2018-05-26 11:27 ` Junling Zheng
2018-05-28 7:29 ` Chao Yu
@ 2018-05-30 6:58 ` Yunlong Song
2018-05-30 14:30 ` Chao Yu
2 siblings, 1 reply; 7+ messages in thread
From: Yunlong Song @ 2018-05-30 6:58 UTC (permalink / raw)
To: jaegeuk, chao, yuchao0, yunlong.song, yunlong.song
Cc: linux-kernel, linux-f2fs-devel, miaoxie
zone_align_start_offset should be u64, but config.start_sector is u32,
so it may be overflow when computing zone_align_start_offset.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
---
fsck/resize.c | 7 ++++---
mkfs/f2fs_format.c | 4 ++--
2 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/fsck/resize.c b/fsck/resize.c
index 649f5d9..3f8b01d 100644
--- a/fsck/resize.c
+++ b/fsck/resize.c
@@ -11,7 +11,8 @@
static int get_new_sb(struct f2fs_super_block *sb)
{
- u_int32_t zone_size_bytes, zone_align_start_offset;
+ u_int32_t zone_size_bytes;
+ u_int64_t zone_align_start_offset;
u_int32_t blocks_for_sit, blocks_for_nat, blocks_for_ssa;
u_int32_t sit_segments, nat_segments, diff, total_meta_segments;
u_int32_t total_valid_blks_available;
@@ -27,10 +28,10 @@ static int get_new_sb(struct f2fs_super_block *sb)
zone_size_bytes = segment_size_bytes * segs_per_zone;
zone_align_start_offset =
- (c.start_sector * DEFAULT_SECTOR_SIZE +
+ ((u_int64_t) c.start_sector * DEFAULT_SECTOR_SIZE +
2 * F2FS_BLKSIZE + zone_size_bytes - 1) /
zone_size_bytes * zone_size_bytes -
- c.start_sector * DEFAULT_SECTOR_SIZE;
+ (u_int64_t) c.start_sector * DEFAULT_SECTOR_SIZE;
set_sb(segment_count, (c.target_sectors * c.sector_size -
zone_align_start_offset) / segment_size_bytes /
diff --git a/mkfs/f2fs_format.c b/mkfs/f2fs_format.c
index e0c3cb8..2350c10 100644
--- a/mkfs/f2fs_format.c
+++ b/mkfs/f2fs_format.c
@@ -212,10 +212,10 @@ static int f2fs_prepare_super_block(void)
set_sb(block_count, c.total_sectors >> log_sectors_per_block);
zone_align_start_offset =
- (c.start_sector * DEFAULT_SECTOR_SIZE +
+ ((u_int64_t) c.start_sector * DEFAULT_SECTOR_SIZE +
2 * F2FS_BLKSIZE + zone_size_bytes - 1) /
zone_size_bytes * zone_size_bytes -
- c.start_sector * DEFAULT_SECTOR_SIZE;
+ (u_int64_t) c.start_sector * DEFAULT_SECTOR_SIZE;
if (c.start_sector % DEFAULT_SECTORS_PER_BLOCK) {
MSG(1, "\t%s: Align start sector number to the page unit\n",
--
1.8.5.2
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH rebase] f2fs-tools: fix overflow bug of start_sector when computing zone_align_start_offset
2018-05-30 6:58 ` [PATCH rebase] " Yunlong Song
@ 2018-05-30 14:30 ` Chao Yu
0 siblings, 0 replies; 7+ messages in thread
From: Chao Yu @ 2018-05-30 14:30 UTC (permalink / raw)
To: Yunlong Song, jaegeuk, yuchao0, yunlong.song
Cc: miaoxie, bintian.wang, shengyong1, heyunlei, linux-f2fs-devel,
linux-kernel
On 2018/5/30 14:58, Yunlong Song wrote:
> zone_align_start_offset should be u64, but config.start_sector is u32,
> so it may be overflow when computing zone_align_start_offset.
>
> Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Thanks,
^ permalink raw reply [flat|nested] 7+ messages in thread