From: Chao Yu <chao@kernel.org>
To: qixiaoyu <qxy65535@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>,
qixiaoyu1 <qixiaoyu1@xiaomi.com>,
linux-kernel@vger.kernel.org,
linux-f2fs-devel@lists.sourceforge.net
Subject: Re: [f2fs-dev] [PATCH] f2fs: separate IPU policy for fdatasync from F2FS_IPU_FSYNC
Date: Tue, 8 Nov 2022 22:30:13 +0800 [thread overview]
Message-ID: <8368702c-ae33-b810-a6c3-ac8fa29998df@kernel.org> (raw)
In-Reply-To: <20221108123218.GC22857@mi-HP-ProDesk-680-G4-MT>
On 2022/11/8 20:32, qixiaoyu wrote:
> On Sun, Nov 06, 2022 at 09:54:59PM +0800, Chao Yu wrote:
>> On 2022/11/2 20:25, qixiaoyu wrote:
>>> Hi Chao,
>>>
>>> fdatasync do in-place-update to avoid additional node writes, but currently
>>> it only do that with F2FS_IPU_FSYNC as:
>>>
>>> f2fs_do_sync_file:
>>> if (datasync || get_dirty_pages(inode) <= SM_I(sbi)->min_fsync_blocks)
>>> set_inode_flag(inode, FI_NEED_IPU);
>>>
>>> check_inplace_update_policy:
>>> /* this is only set during fdatasync */
>>> if (policy & (0x1 << F2FS_IPU_FSYNC) &&
>>> is_inode_flag_set(inode, FI_NEED_IPU))
>>> return true;
>>>
>>> So this patch separate in-place-update of fdatasync from F2FS_IPU_FSYNC to
>>> apply it to all IPU policy.
>>>
>>> BTW, we found small performance improvement with this patch on AndroBench app
>>> using F2FS_IPU_SSR_UTIL on our product:
>>
>> How this patch affects performance when F2FS_IPU_SSR_UTIL is on?
>>
>> Thanks,
>>
>
> SQLite test in AndroBench app use fdatasync to sync file to the disk.
> When switch to F2FS_IPU_SSR_UTIL ipu_policy, it will use out-of-place-update
> even though SQLite calls fdatasync, which will introduce extra meta data write.
Why not using F2FS_IPU_SSR_UTIL | F2FS_IPU_FSYNC, I guess these two flags
cover different scenarios, F2FS_IPU_SSR_UTIL for ssr case, and F2FS_IPU_FSYNC
for f{data,}sync case.
Thanks,
>
> Thanks.
>
>>>
>>> F2FS_IPU_FSYNC F2FS_IPU_SSR_UTIL F2FS_IPU_SSR_UTIL(with patch)
>>> SQLite Insert(QPS) 6818.08 6327.09(-7.20%) 6757.72
>>> SQLite Update(QPS) 6528.81 6336.57(-2.94%) 6490.77
>>> SQLite Delete(QPS) 9724.68 9378.37(-3.56%) 9622.27
>>>
>>> Thanks
>>>
>>> On Tue, Nov 01, 2022 at 11:14:55PM +0800, Chao Yu wrote:
>>>> On 2022/10/21 10:31, qixiaoyu1 wrote:
>>>>> Currently IPU policy for fdatasync is coupled with F2FS_IPU_FSYNC.
>>>>> Fix to apply it to all IPU policy.
>>>>
>>>> Xiaoyu,
>>>>
>>>> Sorry for the delay.
>>>>
>>>> I didn't get the point, can you please explain more about the
>>>> issue?
>>>>
>>>> Thanks,
>>>>
>>>>>
>>>>> Signed-off-by: qixiaoyu1 <qixiaoyu1@xiaomi.com>
>>>>> ---
>>>>> fs/f2fs/data.c | 8 +++-----
>>>>> fs/f2fs/file.c | 4 +++-
>>>>> 2 files changed, 6 insertions(+), 6 deletions(-)
>>>>>
>>>>> diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
>>>>> index a71e818cd67b..fec8e15fe820 100644
>>>>> --- a/fs/f2fs/data.c
>>>>> +++ b/fs/f2fs/data.c
>>>>> @@ -2518,6 +2518,9 @@ static inline bool check_inplace_update_policy(struct inode *inode,
>>>>> if (policy & (0x1 << F2FS_IPU_HONOR_OPU_WRITE) &&
>>>>> is_inode_flag_set(inode, FI_OPU_WRITE))
>>>>> return false;
>>>>> + /* this is set by fdatasync or F2FS_IPU_FSYNC policy */
>>>>> + if (is_inode_flag_set(inode, FI_NEED_IPU))
>>>>> + return true;
>>>>> if (policy & (0x1 << F2FS_IPU_FORCE))
>>>>> return true;
>>>>> if (policy & (0x1 << F2FS_IPU_SSR) && f2fs_need_SSR(sbi))
>>>>> @@ -2538,11 +2541,6 @@ static inline bool check_inplace_update_policy(struct inode *inode,
>>>>> !IS_ENCRYPTED(inode))
>>>>> return true;
>>>>> - /* this is only set during fdatasync */
>>>>> - if (policy & (0x1 << F2FS_IPU_FSYNC) &&
>>>>> - is_inode_flag_set(inode, FI_NEED_IPU))
>>>>> - return true;
>>>>> -
>>>>> if (unlikely(fio && is_sbi_flag_set(sbi, SBI_CP_DISABLED) &&
>>>>> !f2fs_is_checkpointed_data(sbi, fio->old_blkaddr)))
>>>>> return true;
>>>>> diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
>>>>> index 82cda1258227..08091550cdf2 100644
>>>>> --- a/fs/f2fs/file.c
>>>>> +++ b/fs/f2fs/file.c
>>>>> @@ -270,8 +270,10 @@ static int f2fs_do_sync_file(struct file *file, loff_t start, loff_t end,
>>>>> goto go_write;
>>>>> /* if fdatasync is triggered, let's do in-place-update */
>>>>> - if (datasync || get_dirty_pages(inode) <= SM_I(sbi)->min_fsync_blocks)
>>>>> + if (datasync || (SM_I(sbi)->ipu_policy & (0x1 << F2FS_IPU_FSYNC) &&
>>>>> + get_dirty_pages(inode) <= SM_I(sbi)->min_fsync_blocks))
>>>>> set_inode_flag(inode, FI_NEED_IPU);
>>>>> +
>>>>> ret = file_write_and_wait_range(file, start, end);
>>>>> clear_inode_flag(inode, FI_NEED_IPU);
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
next prev parent reply other threads:[~2022-11-08 14:30 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-21 2:31 [f2fs-dev] [PATCH] f2fs: separate IPU policy for fdatasync from F2FS_IPU_FSYNC qixiaoyu1
2022-10-31 11:27 ` qixiaoyu
2022-11-01 15:14 ` Chao Yu
2022-11-02 12:25 ` qixiaoyu
2022-11-06 13:54 ` Chao Yu
2022-11-08 12:32 ` qixiaoyu
2022-11-08 14:30 ` Chao Yu [this message]
2022-11-09 12:56 ` qixiaoyu
2022-11-09 13:39 ` Chao Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8368702c-ae33-b810-a6c3-ac8fa29998df@kernel.org \
--to=chao@kernel.org \
--cc=jaegeuk@kernel.org \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=qixiaoyu1@xiaomi.com \
--cc=qxy65535@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).