linux-f2fs-devel.lists.sourceforge.net archive mirror
 help / color / mirror / Atom feed
From: Jaegeuk Kim <jaegeuk@kernel.org>
To: Fengnan Chang <changfengnan@vivo.com>
Cc: linux-f2fs-devel@lists.sourceforge.net
Subject: Re: [f2fs-dev] [PATCH v2] f2fs: compress: add nocompress extensions support
Date: Tue, 4 May 2021 10:15:26 -0700	[thread overview]
Message-ID: <YJGBLoP/Ue4FFh39@google.com> (raw)
In-Reply-To: <20210428125155.1020-1-changfengnan@vivo.com>

Hi Fengnan,

On 04/28, Fengnan Chang wrote:
> When we create a directory with enable compression, all file write into
> directory will try to compress.But sometimes we may know, new file
> cannot meet compression ratio requirements.
> We need a nocompress extension to skip those files to avoid unnecessary
> compress page test.
> 
> Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
> ---
>  Documentation/filesystems/f2fs.rst |  8 +++
>  fs/f2fs/f2fs.h                     |  2 +
>  fs/f2fs/namei.c                    | 18 +++++--
>  fs/f2fs/super.c                    | 79 +++++++++++++++++++++++++++++-
>  4 files changed, 103 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/filesystems/f2fs.rst b/Documentation/filesystems/f2fs.rst
> index 63c0c49b726d..f9248a36cd53 100644
> --- a/Documentation/filesystems/f2fs.rst
> +++ b/Documentation/filesystems/f2fs.rst
> @@ -281,6 +281,14 @@ compress_extension=%s	 Support adding specified extension, so that f2fs can enab
>  			 For other files, we can still enable compression via ioctl.
>  			 Note that, there is one reserved special extension '*', it
>  			 can be set to enable compression for all files.
> +nocompress_extension=%s	   Support adding specified extension, so that f2fs can disable
> +			 compression on those corresponding files, just contrary to compression extension.
> +			 If you know exactly which files cannot be compressed, you can use this.
> +			 The same extension name cannot not appear in both compress and nocompress
                                                 ----------
                                                  typo?

> +			 extension at the same time.
> +			 If the compress extension specifies all files, the types specified by the

                         why do we need this?

> +			 nocompress extension will be treated as special cases and will not be compressed.
> +			 Don't allow the nocompress extension specifies all files.

                         What does this mean?

>  compress_chksum		 Support verifying chksum of raw data in compressed cluster.
>  compress_mode=%s	 Control file compression mode. This supports "fs" and "user"
>  			 modes. In "fs" mode (default), f2fs does automatic compression
> diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
> index 87d734f5589d..3d5d28a2568f 100644
> --- a/fs/f2fs/f2fs.h
> +++ b/fs/f2fs/f2fs.h
> @@ -150,8 +150,10 @@ struct f2fs_mount_info {
>  	unsigned char compress_level;		/* compress level */
>  	bool compress_chksum;			/* compressed data chksum */
>  	unsigned char compress_ext_cnt;		/* extension count */
> +	unsigned char nocompress_ext_cnt;		/* nocompress extension count */
>  	int compress_mode;			/* compression mode */
>  	unsigned char extensions[COMPRESS_EXT_NUM][F2FS_EXTENSION_LEN];	/* extensions */
> +	unsigned char noextensions[COMPRESS_EXT_NUM][F2FS_EXTENSION_LEN]; /* extensions */
>  };
> 
>  #define F2FS_FEATURE_ENCRYPT		0x0001
> diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c
> index 405d85dbf9f1..84ca322a22ee 100644
> --- a/fs/f2fs/namei.c
> +++ b/fs/f2fs/namei.c
> @@ -279,14 +279,16 @@ static void set_compress_inode(struct f2fs_sb_info *sbi, struct inode *inode,
>  						const unsigned char *name)
>  {
>  	__u8 (*extlist)[F2FS_EXTENSION_LEN] = sbi->raw_super->extension_list;
> +	unsigned char (*noext)[F2FS_EXTENSION_LEN] = F2FS_OPTION(sbi).noextensions;
>  	unsigned char (*ext)[F2FS_EXTENSION_LEN];
> -	unsigned int ext_cnt = F2FS_OPTION(sbi).compress_ext_cnt;
> +	unsigned char ext_cnt = F2FS_OPTION(sbi).compress_ext_cnt;
> +	unsigned char noext_cnt = F2FS_OPTION(sbi).nocompress_ext_cnt;
>  	int i, cold_count, hot_count;
> 
>  	if (!f2fs_sb_has_compression(sbi) ||
> -			is_inode_flag_set(inode, FI_COMPRESSED_FILE) ||
>  			F2FS_I(inode)->i_flags & F2FS_NOCOMP_FL ||
> -			!f2fs_may_compress(inode))
> +			!f2fs_may_compress(inode) ||
> +			(!ext_cnt && !noext_cnt))
>  		return;
> 
>  	down_read(&sbi->sb_lock);
> @@ -303,6 +305,16 @@ static void set_compress_inode(struct f2fs_sb_info *sbi, struct inode *inode,
> 
>  	up_read(&sbi->sb_lock);
> 
> +	for (i = 0; i < noext_cnt; i++) {
> +		if (is_extension_exist(name, noext[i])) {
> +			f2fs_disable_compressed_file(inode);
> +			return;
> +		}
> +	}
> +
> +	if (is_inode_flag_set(inode, FI_COMPRESSED_FILE))
> +		return;
> +
>  	ext = F2FS_OPTION(sbi).extensions;
> 
>  	for (i = 0; i < ext_cnt; i++) {
> diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
> index 5020152aa8fc..865191339625 100644
> --- a/fs/f2fs/super.c
> +++ b/fs/f2fs/super.c
> @@ -148,6 +148,7 @@ enum {
>  	Opt_compress_algorithm,
>  	Opt_compress_log_size,
>  	Opt_compress_extension,
> +	Opt_nocompress_extension,
>  	Opt_compress_chksum,
>  	Opt_compress_mode,
>  	Opt_atgc,
> @@ -222,6 +223,7 @@ static match_table_t f2fs_tokens = {
>  	{Opt_compress_algorithm, "compress_algorithm=%s"},
>  	{Opt_compress_log_size, "compress_log_size=%u"},
>  	{Opt_compress_extension, "compress_extension=%s"},
> +	{Opt_nocompress_extension, "nocompress_extension=%s"},
>  	{Opt_compress_chksum, "compress_chksum"},
>  	{Opt_compress_mode, "compress_mode=%s"},
>  	{Opt_atgc, "atgc"},
> @@ -473,6 +475,43 @@ static int f2fs_set_test_dummy_encryption(struct super_block *sb,
>  }
> 
>  #ifdef CONFIG_F2FS_FS_COMPRESSION
> +/*
> + * 1. The same extension name cannot not appear in both compress and non-compress extension
> + * at the same time.
> + * 2. If the compress extension specifies all files, the types specified by the non-compress
> + * extension will be treated as special cases and will not be compressed.
> + * 3. Don't allow the non-compress extension specifies all files.
> + */
> +static int f2fs_test_compress_extension(struct f2fs_sb_info *sbi)
> +{
> +	unsigned char (*ext)[F2FS_EXTENSION_LEN];
> +	unsigned char (*noext)[F2FS_EXTENSION_LEN];
> +	int ext_cnt, noext_cnt, index = 0, no_index = 0;
> +
> +	ext = F2FS_OPTION(sbi).extensions;
> +	ext_cnt = F2FS_OPTION(sbi).compress_ext_cnt;
> +	noext = F2FS_OPTION(sbi).noextensions;
> +	noext_cnt = F2FS_OPTION(sbi).nocompress_ext_cnt;
> +
> +	if (!ext_cnt || !noext_cnt)
> +		return 0;
> +
> +	for (no_index = 0; no_index < noext_cnt; no_index++) {
> +		if (!strcasecmp("*", noext[no_index])) {
> +			f2fs_info(sbi, "Don't allow the non-compress extension specifies all files");
> +			return -EINVAL;
> +		}
> +		for (index = 0; index < ext_cnt; index++) {
> +			if (!strcasecmp(ext[index], noext[no_index])) {
> +				f2fs_info(sbi, "Don't allow the same extension %s appear in both compress and non-compress extension",
> +						ext[index]);
> +				return -EINVAL;
> +			}
> +		}
> +	}
> +	return 0;
> +}
> +
>  #ifdef CONFIG_F2FS_FS_LZ4
>  static int f2fs_set_lz4hc_level(struct f2fs_sb_info *sbi, const char *str)
>  {
> @@ -546,7 +585,8 @@ static int parse_options(struct super_block *sb, char *options, bool is_remount)
>  	substring_t args[MAX_OPT_ARGS];
>  #ifdef CONFIG_F2FS_FS_COMPRESSION
>  	unsigned char (*ext)[F2FS_EXTENSION_LEN];
> -	int ext_cnt;
> +	unsigned char (*noext)[F2FS_EXTENSION_LEN];
> +	int ext_cnt, noext_cnt;
>  #endif
>  	char *p, *name;
>  	int arg = 0;
> @@ -1049,6 +1089,30 @@ static int parse_options(struct super_block *sb, char *options, bool is_remount)
>  			F2FS_OPTION(sbi).compress_ext_cnt++;
>  			kfree(name);
>  			break;
> +		case Opt_nocompress_extension:
> +			if (!f2fs_sb_has_compression(sbi)) {
> +				f2fs_info(sbi, "Image doesn't support compression");
> +				break;
> +			}
> +			name = match_strdup(&args[0]);
> +			if (!name)
> +				return -ENOMEM;
> +
> +			noext = F2FS_OPTION(sbi).noextensions;
> +			noext_cnt = F2FS_OPTION(sbi).nocompress_ext_cnt;
> +
> +			if (strlen(name) >= F2FS_EXTENSION_LEN ||
> +				noext_cnt >= COMPRESS_EXT_NUM) {
> +				f2fs_err(sbi,
> +					"invalid extension length/number");
> +				kfree(name);
> +				return -EINVAL;
> +			}
> +
> +			strcpy(noext[noext_cnt], name);
> +			F2FS_OPTION(sbi).nocompress_ext_cnt++;
> +			kfree(name);
> +			break;
>  		case Opt_compress_chksum:
>  			F2FS_OPTION(sbi).compress_chksum = true;
>  			break;
> @@ -1070,6 +1134,7 @@ static int parse_options(struct super_block *sb, char *options, bool is_remount)
>  		case Opt_compress_algorithm:
>  		case Opt_compress_log_size:
>  		case Opt_compress_extension:
> +		case Opt_nocompress_extension:
>  		case Opt_compress_chksum:
>  		case Opt_compress_mode:
>  			f2fs_info(sbi, "compression options not supported");
> @@ -1122,6 +1187,13 @@ static int parse_options(struct super_block *sb, char *options, bool is_remount)
>  	}
>  #endif
> 
> +#ifdef CONFIG_F2FS_FS_COMPRESSION
> +	if (f2fs_test_compress_extension(sbi)) {
> +		f2fs_err(sbi, "invalid compress or nocompress extension");
> +		return -EINVAL;
> +	}
> +#endif
> +
>  	if (F2FS_IO_SIZE_BITS(sbi) && !f2fs_lfs_mode(sbi)) {
>  		f2fs_err(sbi, "Should set mode=lfs with %uKB-sized IO",
>  			 F2FS_IO_SIZE_KB(sbi));
> @@ -1665,6 +1737,11 @@ static inline void f2fs_show_compress_options(struct seq_file *seq,
>  			F2FS_OPTION(sbi).extensions[i]);
>  	}
> 
> +	for (i = 0; i < F2FS_OPTION(sbi).nocompress_ext_cnt; i++) {
> +		seq_printf(seq, ",nocompress_extension=%s",
> +			F2FS_OPTION(sbi).noextensions[i]);
> +	}
> +
>  	if (F2FS_OPTION(sbi).compress_chksum)
>  		seq_puts(seq, ",compress_chksum");
> 
> --
> 2.29.0


_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

  reply	other threads:[~2021-05-04 17:15 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-28 12:51 [f2fs-dev] [PATCH v2] f2fs: compress: add nocompress extensions support Fengnan Chang
2021-05-04 17:15 ` Jaegeuk Kim [this message]
2021-05-05  6:43   ` fengnan chang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YJGBLoP/Ue4FFh39@google.com \
    --to=jaegeuk@kernel.org \
    --cc=changfengnan@vivo.com \
    --cc=linux-f2fs-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).