linux-f2fs-devel.lists.sourceforge.net archive mirror
 help / color / mirror / Atom feed
From: Chao Liu <chaoliu719@gmail.com>
To: Chao Yu <chao@kernel.org>
Cc: Chao Liu <liuchao@coolpad.com>,
	linux-kernel@vger.kernel.org, Wayne Zhang <zhangwen@coolpad.com>,
	Yue Hu <huyue2@coolpad.com>, Jaegeuk Kim <jaegeuk@kernel.org>,
	linux-f2fs-devel@lists.sourceforge.net
Subject: Re: [f2fs-dev] [PATCH] f2fs: fix to remove F2FS_COMPR_FL and tag F2FS_NOCOMP_FL at the same time
Date: Thu, 23 Jun 2022 12:44:40 +0800	[thread overview]
Message-ID: <YrPvuPLze3QoCkPJ@liuchao-VM> (raw)
In-Reply-To: <0771b00b-e781-cd29-896a-4b6ebc948c2e@kernel.org>

On Wed, Jun 22, 2022 at 09:42:13PM +0800, Chao Yu wrote:
> On 2022/6/21 14:48, Chao Liu wrote:
> > From: Chao Liu <liuchao@coolpad.com>
> >
> > If the inode has the compress flag, it will fail to use
> > 'chattr -c +m' to remove its compress flag and tag no compress flag.
> > However, the same command will be successful when executed again,
> > as shown below:
> >
> >    $ touch foo.txt
> >    $ chattr +c foo.txt
> >    $ chattr -c +m foo.txt
> >    chattr: Invalid argument while setting flags on foo.txt
> >    $ chattr -c +m foo.txt
> >    $ f2fs_io getflags foo.txt
> >    get a flag on foo.txt ret=0, flags=nocompression,inline_data
> >
> > Fix this by removing some checks in f2fs_setflags_common()
> > that do not affect the original logic. I go through all the
> > possible scenarios, and the results are as follows. Bold is
> > the only thing that has changed.
> >
> > +---------------+-----------+-----------+----------+
> > |               |            file flags            |
> > + command       +-----------+-----------+----------+
> > |               | no flag   | compr     | nocompr  |
> > +---------------+-----------+-----------+----------+
> > | chattr +c     | compr     | compr     | -EINVAL  |
> > | chattr -c     | no flag   | no flag   | nocompr  |
> > | chattr +m     | nocompr   | -EINVAL   | nocompr  |
> > | chattr -m     | no flag   | compr     | no flag  |
> > | chattr +c +m  | -EINVAL   | -EINVAL   | -EINVAL  |
> > | chattr +c -m  | compr     | compr     | compr    |
> > | chattr -c +m  | nocompr   | *nocompr* | nocompr  |
> > | chattr -c -m  | no flag   | no flag   | no flag  |
> > +---------------+-----------+-----------+----------+
> >
> > Fixes: 4c8ff7095bef ("f2fs: support data compression")
> > Signed-off-by: Chao Liu <liuchao@coolpad.com>
> > ---
> >
> > This patch depends on the the patch
> > "f2fs: allow compression of files without blocks" sent earlier this day.
> >
> >   fs/f2fs/file.c | 9 +--------
> >   1 file changed, 1 insertion(+), 8 deletions(-)
> >
> > diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
> > index daaa0dfd2d2e..0c3ae5993b7a 100644
> > --- a/fs/f2fs/file.c
> > +++ b/fs/f2fs/file.c
> > @@ -1873,10 +1873,7 @@ static int f2fs_setflags_common(struct inode *inode, u32 iflags, u32 mask)
> >   		if (masked_flags & F2FS_COMPR_FL) {
> >   			if (!f2fs_disable_compressed_file(inode))
> >   				return -EINVAL;
> > -		}
> > -		if (iflags & F2FS_NOCOMP_FL)
> > -			return -EINVAL;
> > -		if (iflags & F2FS_COMPR_FL) {
> > +		} else {
> >   			if (!f2fs_may_compress(inode))
> >   				return -EINVAL;
> >   			if (S_ISREG(inode->i_mode) && F2FS_HAS_BLOCKS(inode))
> > @@ -1885,10 +1882,6 @@ static int f2fs_setflags_common(struct inode *inode, u32 iflags, u32 mask)
> >   			set_compress_context(inode);
> >   		}
> >   	}
> > -	if ((iflags ^ masked_flags) & F2FS_NOCOMP_FL) {
> > -		if (masked_flags & F2FS_COMPR_FL)
> > -			return -EINVAL;
> > -	}
>
> Without above check condition, can we return -EINVAL for the case:
>
> chattr +c on file w/ nocompr flag
>
> |               | no flag   | compr     | nocompr  |
> +---------------+-----------+-----------+----------+
> | chattr +c     | compr     | compr     | *-EINVAL*  |

Yes, we can.

chattr(1) grabs flags via GETFLAGS, modifies the result,
and passes that to SETFLAGS. If we execute 'chattr +c'
on the file with nocompr flag, the iflags will
contain both compr and nocompr flags, then be refused by:

    if ((iflags & F2FS_COMPR_FL) && (iflags & F2FS_NOCOMP_FL))
        return -EINVAL;

In addition, if iflags has only compr flag, while masked_flags
has only nocompr flag for some reason
(either because of concurrency of chattr(1) or by a user),
I think we need remove nocompr flag and tag compr flag on the file,
similar to the following.

|               | no flag   | compr     | nocompr  |
+---------------+-----------+-----------+----------+
| chattr +c -m  | compr     | compr     | *compr*  |

Thanks,


_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

  reply	other threads:[~2022-06-23  4:44 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-21  6:48 [f2fs-dev] [PATCH] f2fs: fix to remove F2FS_COMPR_FL and tag F2FS_NOCOMP_FL at the same time Chao Liu
2022-06-22 13:42 ` Chao Yu
2022-06-23  4:44   ` Chao Liu [this message]
2022-07-06  2:57     ` Chao Liu
2022-07-06 14:21 ` Chao Yu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YrPvuPLze3QoCkPJ@liuchao-VM \
    --to=chaoliu719@gmail.com \
    --cc=chao@kernel.org \
    --cc=huyue2@coolpad.com \
    --cc=jaegeuk@kernel.org \
    --cc=linux-f2fs-devel@lists.sourceforge.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=liuchao@coolpad.com \
    --cc=zhangwen@coolpad.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).