From: Jaegeuk Kim <jaegeuk@kernel.org>
To: Chunhai Guo <guochunhai@vivo.com>
Cc: linux-f2fs-devel@lists.sourceforge.net, frank.li@vivo.com
Subject: Re: [f2fs-dev] [PATCH v7] fsck.f2fs: Detect and fix looped node chain efficiently
Date: Tue, 23 May 2023 18:29:16 -0700 [thread overview]
Message-ID: <ZG1obHA7vrFzXx6r@google.com> (raw)
In-Reply-To: <20230523104059.78315-1-guochunhai@vivo.com>
On 05/23, Chunhai Guo wrote:
> find_fsync_inode() detect the looped node chain by comparing the loop
> counter with free blocks. While it may take tens of seconds to quit when
> the free blocks are large enough. We can use Floyd's cycle detection
> algorithm to make the detection more efficient, and fix the issue by
> filling a NULL address in the last node of the chain.
>
> Below is the log we encounter on a 256GB UFS storage and it takes about
> 25 seconds to detect looped node chain. After changing the algorithm, it
> takes about 20ms to finish the same job.
>
> [ 10.822904] fsck.f2fs: Info: version timestamp cur: 17, prev: 430
> [ 10.822949] fsck.f2fs: [update_superblock: 762] Info: Done to
> update superblock
> [ 10.822953] fsck.f2fs: Info: superblock features = 1499 :
> encrypt verity extra_attr project_quota quota_ino casefold
> [ 10.822956] fsck.f2fs: Info: superblock encrypt level = 0, salt =
> 00000000000000000000000000000000
> [ 10.822960] fsck.f2fs: Info: total FS sectors = 59249811 (231444
> MB)
> [ 35.852827] fsck.f2fs: detect looped node chain,
> blkaddr:1114802, next:1114803
> [ 35.852842] fsck.f2fs: [f2fs_do_mount:3846] record_fsync_data
> failed
> [ 35.856106] fsck.f2fs: fsck.f2fs terminated by exit(255)
>
> Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
> ---
> v6 -> v7 : Correct logic error to handle is_detecting return by
> find_node_blk_fast().
> v5 -> v6 : Simplify the code by removing unnecessary retry logic.
> v4 -> v5 : Use IS_INODE() to make the code more clear.
> v3 -> v4 : Set c.bug_on with ASSERT_MSG() when issue is detected and fix
> it only if c.fix_on is 1.
> v2 -> v3 : Write inode with write_inode() to avoid chksum being broken.
> v1 -> v2 : Fix looped node chain directly after it is detected.
> ---
> fsck/mount.c | 132 ++++++++++++++++++++++++++++++++++++++++++++-------
> 1 file changed, 114 insertions(+), 18 deletions(-)
>
> diff --git a/fsck/mount.c b/fsck/mount.c
> index 4c7488840c7c..d7fa81f61cb7 100644
> --- a/fsck/mount.c
> +++ b/fsck/mount.c
> @@ -3518,22 +3518,90 @@ static void destroy_fsync_dnodes(struct list_head *head)
> del_fsync_inode(entry);
> }
>
> +static int find_node_blk_fast(struct f2fs_sb_info *sbi, block_t *blkaddr_fast,
> + struct f2fs_node *node_blk_fast, bool *is_detecting)
> +{
> + int i, err;
> +
> + for (i = 0; i < 2; i++) {
> + if (!f2fs_is_valid_blkaddr(sbi, *blkaddr_fast, META_POR)) {
> + *is_detecting = false;
> + return 0;
> + }
> +
> + err = dev_read_block(node_blk_fast, *blkaddr_fast);
> + if (err)
> + return err;
> +
> + if (!is_recoverable_dnode(sbi, node_blk_fast)) {
> + *is_detecting = false;
> + return 0;
> + }
> +
> + *blkaddr_fast = next_blkaddr_of_node(node_blk_fast);
> + }
> +
> + return 0;
> +}
> +
> +static int loop_node_chain_fix(struct f2fs_sb_info *sbi,
> + block_t blkaddr_fast, struct f2fs_node *node_blk_fast,
> + block_t blkaddr, struct f2fs_node *node_blk)
> +{
> + block_t blkaddr_entry, blkaddr_tmp;
> + int err;
> +
> + /* find the entry point of the looped node chain */
> + while (blkaddr_fast != blkaddr) {
> + err = dev_read_block(node_blk_fast, blkaddr_fast);
> + if (err)
> + return err;
> + blkaddr_fast = next_blkaddr_of_node(node_blk_fast);
> +
> + err = dev_read_block(node_blk, blkaddr);
> + if (err)
> + return err;
> + blkaddr = next_blkaddr_of_node(node_blk);
> + }
> + blkaddr_entry = blkaddr;
> +
> + /* find the last node of the chain */
> + do {
> + blkaddr_tmp = blkaddr;
> + err = dev_read_block(node_blk, blkaddr);
> + if (err)
> + return err;
> + blkaddr = next_blkaddr_of_node(node_blk);
> + } while (blkaddr != blkaddr_entry);
> +
> + /* fix the blkaddr of last node with NULL_ADDR. */
> + node_blk->footer.next_blkaddr = NULL_ADDR;
> + if (IS_INODE(node_blk))
> + err = write_inode(node_blk, blkaddr_tmp);
> + else
> + err = dev_write_block(node_blk, blkaddr_tmp);
> + if (!err)
> + FIX_MSG("Fix looped node chain on blkaddr %u\n",
> + blkaddr_tmp);
> + return err;
> +}
> +
> static int find_fsync_inode(struct f2fs_sb_info *sbi, struct list_head *head)
> {
> struct curseg_info *curseg;
> - struct f2fs_node *node_blk;
> - block_t blkaddr;
> - unsigned int loop_cnt = 0;
> - unsigned int free_blocks = MAIN_SEGS(sbi) * sbi->blocks_per_seg -
> - sbi->total_valid_block_count;
> + struct f2fs_node *node_blk, *node_blk_fast;
> + block_t blkaddr, blkaddr_fast;
> + bool is_detecting = true;
> int err = 0;
>
> + node_blk = calloc(F2FS_BLKSIZE, 1);
> + node_blk_fast = calloc(F2FS_BLKSIZE, 1);
> + ASSERT(node_blk && node_blk_fast);
> +
> /* get node pages in the current segment */
> curseg = CURSEG_I(sbi, CURSEG_WARM_NODE);
> blkaddr = NEXT_FREE_BLKADDR(sbi, curseg);
> -
> - node_blk = calloc(F2FS_BLKSIZE, 1);
> - ASSERT(node_blk);
> + blkaddr_fast = blkaddr;
>
> while (1) {
> struct fsync_inode_entry *entry;
> @@ -3564,19 +3632,47 @@ static int find_fsync_inode(struct f2fs_sb_info *sbi, struct list_head *head)
> if (IS_INODE(node_blk) && is_dent_dnode(node_blk))
> entry->last_dentry = blkaddr;
> next:
> - /* sanity check in order to detect looped node chain */
> - if (++loop_cnt >= free_blocks ||
> - blkaddr == next_blkaddr_of_node(node_blk)) {
> - MSG(0, "\tdetect looped node chain, blkaddr:%u, next:%u\n",
> - blkaddr,
> - next_blkaddr_of_node(node_blk));
> - err = -1;
> - break;
> - }
> -
> blkaddr = next_blkaddr_of_node(node_blk);
> +
> + /* sanity check to detect looped node chain with Floyd's cycle
> + * detection algorithm
> + */
I added this instead of the below long if body.
if (!is_detecting)
continue;
> + if (is_detecting) {
> + err = find_node_blk_fast(sbi, &blkaddr_fast,
> + node_blk_fast, &is_detecting);
> + if (err)
> + break;
> +
> + if (!is_detecting)
> + continue;
> +
> + if (blkaddr_fast != blkaddr)
> + continue;
> +
> + ASSERT_MSG("\tdetect looped node chain, blkaddr:%u\n",
> + blkaddr);
> +
> + if (!c.fix_on) {
> + err = -1;
> + break;
> + }
> +
> + err = loop_node_chain_fix(sbi,
> + NEXT_FREE_BLKADDR(sbi, curseg),
> + node_blk_fast, blkaddr, node_blk);
> + if (err)
> + break;
> +
> + /* Since we call get_fsync_inode() to ensure there are
> + * no duplicate inodes in the inode_list even if there
> + * are duplicate blkaddr, we can continue running
> + * after fixing the looped node chain.
> + */
> + is_detecting = false;
> + }
> }
>
> + free(node_blk_fast);
> free(node_blk);
> return err;
> }
> --
> 2.25.1
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
prev parent reply other threads:[~2023-05-24 1:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-23 10:40 [f2fs-dev] [PATCH v7] fsck.f2fs: Detect and fix looped node chain efficiently Chunhai Guo via Linux-f2fs-devel
2023-05-23 12:36 ` Chao Yu
2023-05-24 1:29 ` Jaegeuk Kim [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZG1obHA7vrFzXx6r@google.com \
--to=jaegeuk@kernel.org \
--cc=frank.li@vivo.com \
--cc=guochunhai@vivo.com \
--cc=linux-f2fs-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).