From: Jaegeuk Kim <jaegeuk@kernel.org>
To: Chao Yu <chao@kernel.org>
Cc: linux-f2fs-devel@lists.sourceforge.net
Subject: Re: [f2fs-dev] [PATCH 3/4] mkfs.f2fs: cleanup w/ alloc_next_free_block()
Date: Wed, 17 May 2023 18:36:22 -0700 [thread overview]
Message-ID: <ZGWBFvPFvQH7qdmz@google.com> (raw)
In-Reply-To: <20230517082632.748914-3-chao@kernel.org>
On 05/17, Chao Yu wrote:
> Introduce alloc_next_free_block() to wrap below openned codes:
>
> blkaddr = get_sb(main_blkaddr) +
> c.cur_seg[curseg_type] * c.blks_per_seg +
> c.curseg_offset[curseg_type];
>
> Meanwhile add curseg_offset field in f2fs_configuration to record
> last blkaddr in each log.
>
> Signed-off-by: Chao Yu <chao@kernel.org>
> ---
> include/f2fs_fs.h | 2 +
> mkfs/f2fs_format.c | 101 +++++++++++++++++++--------------------------
> 2 files changed, 45 insertions(+), 58 deletions(-)
>
> diff --git a/include/f2fs_fs.h b/include/f2fs_fs.h
> index 8475645..05d27ba 100644
> --- a/include/f2fs_fs.h
> +++ b/include/f2fs_fs.h
> @@ -603,6 +603,8 @@ struct f2fs_configuration {
>
> /* compression support for sload.f2fs */
> compress_config_t compress;
> +
> + block_t curseg_offset[6];
NR_CURSEG_TYPE?
> };
>
> #ifdef CONFIG_64BIT
> diff --git a/mkfs/f2fs_format.c b/mkfs/f2fs_format.c
> index 620f779..2ca5f48 100644
> --- a/mkfs/f2fs_format.c
> +++ b/mkfs/f2fs_format.c
> @@ -1230,11 +1230,24 @@ static int f2fs_discard_obsolete_dnode(void)
> }
> #endif
>
> +static block_t alloc_next_free_block(int curseg_type, int blkcnt)
> +{
> + block_t blkaddr;
> +
> + blkaddr = get_sb(main_blkaddr) +
> + c.cur_seg[curseg_type] * c.blks_per_seg +
> + c.curseg_offset[curseg_type];
> +
> + c.curseg_offset[curseg_type] += blkcnt;
> +
> + return blkaddr;
> +}
> +
> static int f2fs_write_root_inode(void)
> {
> struct f2fs_node *raw_node = NULL;
> - uint64_t data_blk_nor;
> - uint64_t main_area_node_seg_blk_offset = 0;
> + block_t data_blkaddr;
> + block_t node_blkaddr;
>
> raw_node = calloc(F2FS_BLKSIZE, 1);
> if (raw_node == NULL) {
> @@ -1248,24 +1261,15 @@ static int f2fs_write_root_inode(void)
> if (c.lpf_ino)
> raw_node->i.i_links = cpu_to_le32(3);
>
> - raw_node->footer.next_blkaddr = cpu_to_le32(
> - get_sb(main_blkaddr) +
> - c.cur_seg[CURSEG_HOT_NODE] *
> - c.blks_per_seg + 1);
> -
> - data_blk_nor = get_sb(main_blkaddr) +
> - c.cur_seg[CURSEG_HOT_DATA] * c.blks_per_seg;
> - raw_node->i.i_addr[get_extra_isize(raw_node)] = cpu_to_le32(data_blk_nor);
> -
> - main_area_node_seg_blk_offset = get_sb(main_blkaddr);
> - main_area_node_seg_blk_offset += c.cur_seg[CURSEG_HOT_NODE] *
> - c.blks_per_seg;
> -
> - DBG(1, "\tWriting root inode (hot node), %x %x %x at offset 0x%08"PRIu64"\n",
> - get_sb(main_blkaddr),
> - c.cur_seg[CURSEG_HOT_NODE],
> - c.blks_per_seg, main_area_node_seg_blk_offset);
> - if (write_inode(raw_node, main_area_node_seg_blk_offset) < 0) {
> + data_blkaddr = alloc_next_free_block(CURSEG_HOT_DATA, 1);
> + raw_node->i.i_addr[get_extra_isize(raw_node)] =
> + cpu_to_le32(data_blkaddr);
> +
> + node_blkaddr = alloc_next_free_block(CURSEG_HOT_NODE, 1);
> + raw_node->footer.next_blkaddr = cpu_to_le32(node_blkaddr + 1);
> +
> + DBG(1, "\tWriting root inode (hot node), offset 0x%x\n", node_blkaddr);
> + if (write_inode(raw_node, node_blkaddr) < 0) {
> MSG(1, "\tError: While writing the raw_node to disk!!!\n");
> free(raw_node);
> return -1;
> @@ -1349,8 +1353,8 @@ static int f2fs_write_default_quota(int qtype, unsigned int blkaddr,
> static int f2fs_write_qf_inode(int qtype, int offset)
> {
> struct f2fs_node *raw_node = NULL;
> - uint64_t data_blk_nor;
> - uint64_t main_area_node_seg_blk_offset = 0;
> + block_t data_blkaddr;
> + block_t node_blkaddr;
> __le32 raw_id;
> int i;
>
> @@ -1366,14 +1370,10 @@ static int f2fs_write_qf_inode(int qtype, int offset)
> raw_node->i.i_blocks = cpu_to_le64(1 + QUOTA_DATA(qtype));
> raw_node->i.i_flags = F2FS_NOATIME_FL | F2FS_IMMUTABLE_FL;
>
> - raw_node->footer.next_blkaddr = cpu_to_le32(
> - get_sb(main_blkaddr) +
> - c.cur_seg[CURSEG_HOT_NODE] *
> - c.blks_per_seg + 1 + qtype + 1);
> + node_blkaddr = alloc_next_free_block(CURSEG_HOT_NODE, 1);
> + raw_node->footer.next_blkaddr = cpu_to_le32(node_blkaddr + 1);
>
> - data_blk_nor = get_sb(main_blkaddr) +
> - c.cur_seg[CURSEG_HOT_DATA] * c.blks_per_seg + 1
> - + offset * QUOTA_DATA(i);
> + data_blkaddr = alloc_next_free_block(CURSEG_HOT_DATA, QUOTA_DATA(i));
>
> if (qtype == 0)
> raw_id = raw_node->i.i_uid;
> @@ -1385,24 +1385,17 @@ static int f2fs_write_qf_inode(int qtype, int offset)
> ASSERT(0);
>
> /* write two blocks */
> - if (f2fs_write_default_quota(qtype, data_blk_nor, raw_id)) {
> + if (f2fs_write_default_quota(qtype, data_blkaddr, raw_id)) {
> free(raw_node);
> return -1;
> }
>
> for (i = 0; i < QUOTA_DATA(qtype); i++)
> raw_node->i.i_addr[get_extra_isize(raw_node) + i] =
> - cpu_to_le32(data_blk_nor + i);
> + cpu_to_le32(data_blkaddr + i);
>
> - main_area_node_seg_blk_offset = get_sb(main_blkaddr);
> - main_area_node_seg_blk_offset += c.cur_seg[CURSEG_HOT_NODE] *
> - c.blks_per_seg + offset + 1;
> -
> - DBG(1, "\tWriting quota inode (hot node), %x %x %x at offset 0x%08"PRIu64"\n",
> - get_sb(main_blkaddr),
> - c.cur_seg[CURSEG_HOT_NODE],
> - c.blks_per_seg, main_area_node_seg_blk_offset);
> - if (write_inode(raw_node, main_area_node_seg_blk_offset) < 0) {
> + DBG(1, "\tWriting quota inode (hot node), offset 0x%x\n", node_blkaddr);
> + if (write_inode(raw_node, node_blkaddr) < 0) {
> MSG(1, "\tError: While writing the raw_node to disk!!!\n");
> free(raw_node);
> return -1;
> @@ -1492,8 +1485,8 @@ static block_t f2fs_add_default_dentry_lpf(void)
> static int f2fs_write_lpf_inode(void)
> {
> struct f2fs_node *raw_node;
> - uint64_t main_area_node_seg_blk_offset;
> - block_t data_blk_nor;
> + block_t data_blkaddr;
> + block_t node_blkaddr;
> int err = 0;
>
> ASSERT(c.lpf_ino);
> @@ -1510,28 +1503,20 @@ static int f2fs_write_lpf_inode(void)
> raw_node->i.i_namelen = le32_to_cpu(strlen(LPF));
> memcpy(raw_node->i.i_name, LPF, strlen(LPF));
>
> - raw_node->footer.next_blkaddr = cpu_to_le32(
> - get_sb(main_blkaddr) +
> - c.cur_seg[CURSEG_HOT_NODE] * c.blks_per_seg +
> - 1 + c.quota_inum + 1);
> + node_blkaddr = alloc_next_free_block(CURSEG_HOT_NODE, 1);
> + raw_node->footer.next_blkaddr = cpu_to_le32(node_blkaddr + 1);
>
> - data_blk_nor = f2fs_add_default_dentry_lpf();
> - if (data_blk_nor == 0) {
> + data_blkaddr = f2fs_add_default_dentry_lpf();
> + if (data_blkaddr == 0) {
> MSG(1, "\tError: Failed to add default dentries for lost+found!!!\n");
> err = -1;
> goto exit;
> }
> - raw_node->i.i_addr[get_extra_isize(raw_node)] = cpu_to_le32(data_blk_nor);
> -
> - main_area_node_seg_blk_offset = get_sb(main_blkaddr);
> - main_area_node_seg_blk_offset += c.cur_seg[CURSEG_HOT_NODE] *
> - c.blks_per_seg + c.quota_inum + 1;
> + raw_node->i.i_addr[get_extra_isize(raw_node)] = cpu_to_le32(data_blkaddr);
>
> - DBG(1, "\tWriting lost+found inode (hot node), %x %x %x at offset 0x%08"PRIu64"\n",
> - get_sb(main_blkaddr),
> - c.cur_seg[CURSEG_HOT_NODE],
> - c.blks_per_seg, main_area_node_seg_blk_offset);
> - if (write_inode(raw_node, main_area_node_seg_blk_offset) < 0) {
> + DBG(1, "\tWriting lost+found inode (hot node), offset 0x%x\n",
> + node_blkaddr);
> + if (write_inode(raw_node, node_blkaddr) < 0) {
> MSG(1, "\tError: While writing the raw_node to disk!!!\n");
> err = -1;
> goto exit;
> --
> 2.40.1
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
next prev parent reply other threads:[~2023-05-18 1:36 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-17 8:26 [f2fs-dev] [PATCH 1/4] f2fs-tools: add noatime for quota file Chao Yu
2023-05-17 8:26 ` [f2fs-dev] [PATCH 2/4] mkfs.f2fs: remove unneeded nat initialization in f2fs_update_nat_root() Chao Yu
2023-05-17 8:26 ` [f2fs-dev] [PATCH 3/4] mkfs.f2fs: cleanup w/ alloc_next_free_block() Chao Yu
2023-05-18 1:36 ` Jaegeuk Kim [this message]
2023-05-18 1:59 ` Chao Yu
2023-05-24 1:40 ` Jaegeuk Kim
2023-05-25 1:22 ` Chao Yu
2023-05-26 3:25 ` Chao Yu
2023-05-17 8:26 ` [f2fs-dev] [PATCH 4/4] mkfs.f2fs: refactor format flow for cleanup Chao Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZGWBFvPFvQH7qdmz@google.com \
--to=jaegeuk@kernel.org \
--cc=chao@kernel.org \
--cc=linux-f2fs-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).