From: Chao Yu <yuchao0@huawei.com>
To: <jaegeuk@kernel.org>
Cc: linux-kernel@vger.kernel.org, linux-f2fs-devel@lists.sourceforge.net
Subject: Re: [f2fs-dev] [PATCH v2 2/2] f2fs: atgc: export entries for better tunability via sysfs
Date: Tue, 25 May 2021 19:32:02 +0800 [thread overview]
Message-ID: <c0d287ca-ad38-f261-3e9d-02d3ceabca89@huawei.com> (raw)
In-Reply-To: <20210512020719.43685-1-yuchao0@huawei.com>
Jaegeuk, could you please queue this in dev-test?
On 2021/5/12 10:07, Chao Yu wrote:
> This patch export below sysfs entries for better ATGC tunability.
>
> /sys/fs/f2fs/<disk>/atgc_candidate_ratio
> /sys/fs/f2fs/<disk>/atgc_candidate_count
> /sys/fs/f2fs/<disk>/atgc_age_weight
> /sys/fs/f2fs/<disk>/atgc_age_threshold
>
> Signed-off-by: Chao Yu <yuchao0@huawei.com>
> ---
> v2:
> - limit value range of candidate_ratio and candidate_ratio in __sbi_store()
> Documentation/ABI/testing/sysfs-fs-f2fs | 28 +++++++++++++++++++++++++
> fs/f2fs/sysfs.c | 27 ++++++++++++++++++++++++
> 2 files changed, 55 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs
> index 4849b8e84e42..5088281e312e 100644
> --- a/Documentation/ABI/testing/sysfs-fs-f2fs
> +++ b/Documentation/ABI/testing/sysfs-fs-f2fs
> @@ -438,3 +438,31 @@ Description: Show the count of inode newly enabled for compression since mount.
> Note that when the compression is disabled for the files, this count
> doesn't decrease. If you write "0" here, you can initialize
> compr_new_inode to "0".
> +
> +What: /sys/fs/f2fs/<disk>/atgc_candidate_ratio
> +Date: May 2021
> +Contact: "Chao Yu" <yuchao0@huawei.com>
> +Description: When ATGC is on, it controls candidate ratio in order to limit total
> + number of potential victim in all candidates, the value should be in
> + range of [0, 100], by default it was initialized as 20(%).
> +
> +What: /sys/fs/f2fs/<disk>/atgc_candidate_count
> +Date: May 2021
> +Contact: "Chao Yu" <yuchao0@huawei.com>
> +Description: When ATGC is on, it controls candidate count in order to limit total
> + number of potential victim in all candidates, by default it was
> + initialized as 10 (sections).
> +
> +What: /sys/fs/f2fs/<disk>/atgc_age_weight
> +Date: May 2021
> +Contact: "Chao Yu" <yuchao0@huawei.com>
> +Description: When ATGC is on, it controls age weight to balance weight proportion
> + in between aging and valid blocks, the value should be in range of
> + [0, 100], by default it was initialized as 60(%).
> +
> +What: /sys/fs/f2fs/<disk>/atgc_age_threshold
> +Date: May 2021
> +Contact: "Chao Yu" <yuchao0@huawei.com>
> +Description: When ATGC is on, it controls age threshold to bypass GCing young
> + candidates whose age is not beyond the threshold, by default it was
> + initialized as 604800 seconds (equals to 7 days).
> diff --git a/fs/f2fs/sysfs.c b/fs/f2fs/sysfs.c
> index 39b522ec73e7..dc71bc968c72 100644
> --- a/fs/f2fs/sysfs.c
> +++ b/fs/f2fs/sysfs.c
> @@ -37,6 +37,7 @@ enum {
> #endif
> RESERVED_BLOCKS, /* struct f2fs_sb_info */
> CPRC_INFO, /* struct ckpt_req_control */
> + ATGC_INFO, /* struct atgc_management */
> };
>
> struct f2fs_attr {
> @@ -75,6 +76,8 @@ static unsigned char *__struct_ptr(struct f2fs_sb_info *sbi, int struct_type)
> #endif
> else if (struct_type == CPRC_INFO)
> return (unsigned char *)&sbi->cprc_info;
> + else if (struct_type == ATGC_INFO)
> + return (unsigned char *)&sbi->am;
> return NULL;
> }
>
> @@ -495,6 +498,20 @@ static ssize_t __sbi_store(struct f2fs_attr *a,
> }
> #endif
>
> + if (!strcmp(a->attr.name, "atgc_candidate_ratio")) {
> + if (t > 100)
> + return -EINVAL;
> + sbi->am.candidate_ratio = t;
> + return count;
> + }
> +
> + if (!strcmp(a->attr.name, "atgc_age_weight")) {
> + if (t > 100)
> + return -EINVAL;
> + sbi->am.age_weight = t;
> + return count;
> + }
> +
> *ui = (unsigned int)t;
>
> return count;
> @@ -710,6 +727,11 @@ F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, compr_written_block, compr_written_block);
> F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, compr_saved_block, compr_saved_block);
> F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, compr_new_inode, compr_new_inode);
> #endif
> +/* For ATGC */
> +F2FS_RW_ATTR(ATGC_INFO, atgc_management, atgc_candidate_ratio, candidate_ratio);
> +F2FS_RW_ATTR(ATGC_INFO, atgc_management, atgc_candidate_count, max_candidate_count);
> +F2FS_RW_ATTR(ATGC_INFO, atgc_management, atgc_age_weight, age_weight);
> +F2FS_RW_ATTR(ATGC_INFO, atgc_management, atgc_age_threshold, age_threshold);
>
> #define ATTR_LIST(name) (&f2fs_attr_##name.attr)
> static struct attribute *f2fs_attrs[] = {
> @@ -778,6 +800,11 @@ static struct attribute *f2fs_attrs[] = {
> ATTR_LIST(compr_saved_block),
> ATTR_LIST(compr_new_inode),
> #endif
> + /* For ATGC */
> + ATTR_LIST(atgc_candidate_ratio),
> + ATTR_LIST(atgc_candidate_count),
> + ATTR_LIST(atgc_age_weight),
> + ATTR_LIST(atgc_age_threshold),
> NULL,
> };
> ATTRIBUTE_GROUPS(f2fs);
>
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
prev parent reply other threads:[~2021-05-25 11:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-12 2:07 [f2fs-dev] [PATCH v2 2/2] f2fs: atgc: export entries for better tunability via sysfs Chao Yu
2021-05-25 11:32 ` Chao Yu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c0d287ca-ad38-f261-3e9d-02d3ceabca89@huawei.com \
--to=yuchao0@huawei.com \
--cc=jaegeuk@kernel.org \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).