From: Chao Yu <chao@kernel.org>
To: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Ming Yan <yanming@tju.edu.cn>,
linux-kernel@vger.kernel.org, stable@vger.kernel.org,
linux-f2fs-devel@lists.sourceforge.net
Subject: Re: [f2fs-dev] [PATCH] f2fs: fix to do sanity check for inline inode
Date: Sun, 8 May 2022 21:52:06 +0800 [thread overview]
Message-ID: <c717cdc3-bb6f-d437-f039-d05418c9dd88@kernel.org> (raw)
In-Reply-To: <142acf95-c940-8d4a-7f00-08f1bb816c49@kernel.org>
Ping,
On 2022/5/5 22:33, Chao Yu wrote:
> On 2022/5/5 11:31, Jaegeuk Kim wrote:
>> On 05/05, Chao Yu wrote:
>>> On 2022/5/5 5:28, Jaegeuk Kim wrote:
>>>> On 04/28, Chao Yu wrote:
>>>>> As Yanming reported in bugzilla:
>>>>>
>>>>> https://bugzilla.kernel.org/show_bug.cgi?id=215895
>>>>>
>>>>> I have encountered a bug in F2FS file system in kernel v5.17.
>>>>>
>>>>> The kernel message is shown below:
>>>>>
>>>>> kernel BUG at fs/inode.c:611!
>>>>> Call Trace:
>>>>> evict+0x282/0x4e0
>>>>> __dentry_kill+0x2b2/0x4d0
>>>>> dput+0x2dd/0x720
>>>>> do_renameat2+0x596/0x970
>>>>> __x64_sys_rename+0x78/0x90
>>>>> do_syscall_64+0x3b/0x90
>>>>>
>>>>> The root cause is: fuzzed inode has both inline_data flag and encrypted
>>>>> flag, so after it was deleted by rename(), during f2fs_evict_inode(),
>>>>> it will cause inline data conversion due to flags confilction, then
>>>>> page cache will be polluted and trigger panic in clear_inode().
>>>>>
>>>>> This patch tries to fix the issue by do more sanity checks for inline
>>>>> data inode in sanity_check_inode().
>>>>>
>>>>> Cc: stable@vger.kernel.org
>>>>> Reported-by: Ming Yan <yanming@tju.edu.cn>
>>>>> Signed-off-by: Chao Yu <chao.yu@oppo.com>
>>>>> ---
>>>>> fs/f2fs/f2fs.h | 7 +++++++
>>>>> fs/f2fs/inode.c | 3 +--
>>>>> 2 files changed, 8 insertions(+), 2 deletions(-)
>>>>>
>>>>> diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
>>>>> index 27aa93caec06..64c511b498cc 100644
>>>>> --- a/fs/f2fs/f2fs.h
>>>>> +++ b/fs/f2fs/f2fs.h
>>>>> @@ -4173,6 +4173,13 @@ static inline void f2fs_set_encrypted_inode(struct inode *inode)
>>>>> */
>>>>> static inline bool f2fs_post_read_required(struct inode *inode)
>>>>> {
>>>>> + /*
>>>>> + * used by sanity_check_inode(), when disk layout fields has not
>>>>> + * been synchronized to inmem fields.
>>>>> + */
>>>>> + if (file_is_encrypt(inode) || file_is_verity(inode) ||
>>>>> + F2FS_I(inode)->i_flags & F2FS_COMPR_FL)
>>>>> + return true;
>>>>> return f2fs_encrypted_file(inode) || fsverity_active(inode) ||
>>>>> f2fs_compressed_file(inode);
>>>>> }
>>>>> diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c
>>>>> index 83639238a1fe..234b8ed02644 100644
>>>>> --- a/fs/f2fs/inode.c
>>>>> +++ b/fs/f2fs/inode.c
>>>>> @@ -276,8 +276,7 @@ static bool sanity_check_inode(struct inode *inode, struct page *node_page)
>>>>> }
>>>>> }
>>>>> - if (f2fs_has_inline_data(inode) &&
>>>>> - (!S_ISREG(inode->i_mode) && !S_ISLNK(inode->i_mode))) {
>>>>> + if (f2fs_has_inline_data(inode) && !f2fs_may_inline_data(inode)) {
>>>>
>>>> It seems f2fs_may_inline_data() is breaking the atomic write case. Please fix.
>>>
>>> sanity_check_inode() change only affect f2fs_iget(), during inode initialization,
>>> file should not be set as atomic one, right?
>>>
>>> I didn't see any failure during 'f2fs_io write atomic_write' testcase... could you
>>> please provide me detail of the testcase?
>>
>> I just applied this into my device and was getting lots of the below error
>> messages resulting in open failures of database files.
>
> Could you please help to apply below patch and dump the log?
>
> From: Chao Yu <chao@kernel.org>
> Subject: [PATCH] f2fs: fix to do sanity check for inline inode
>
> Signed-off-by: Chao Yu <chao.yu@oppo.com>
> ---
> fs/f2fs/f2fs.h | 7 +++++++
> fs/f2fs/inode.c | 11 +++++++----
> 2 files changed, 14 insertions(+), 4 deletions(-)
>
> diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
> index 0f8c426aed50..13a9212d6cb6 100644
> --- a/fs/f2fs/f2fs.h
> +++ b/fs/f2fs/f2fs.h
> @@ -4159,6 +4159,13 @@ static inline void f2fs_set_encrypted_inode(struct inode *inode)
> */
> static inline bool f2fs_post_read_required(struct inode *inode)
> {
> + /*
> + * used by sanity_check_inode(), when disk layout fields has not
> + * been synchronized to inmem fields.
> + */
> + if (file_is_encrypt(inode) || file_is_verity(inode) ||
> + F2FS_I(inode)->i_flags & F2FS_COMPR_FL)
> + return true;
> return f2fs_encrypted_file(inode) || fsverity_active(inode) ||
> f2fs_compressed_file(inode);
> }
> diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c
> index 02630c17da93..a98614a24ad0 100644
> --- a/fs/f2fs/inode.c
> +++ b/fs/f2fs/inode.c
> @@ -276,11 +276,14 @@ static bool sanity_check_inode(struct inode *inode, struct page *node_page)
> }
> }
>
> - if (f2fs_has_inline_data(inode) &&
> - (!S_ISREG(inode->i_mode) && !S_ISLNK(inode->i_mode))) {
> + if (f2fs_has_inline_data(inode) && !f2fs_may_inline_data(inode)) {
> set_sbi_flag(sbi, SBI_NEED_FSCK);
> - f2fs_warn(sbi, "%s: inode (ino=%lx, mode=%u) should not have inline_data, run fsck to fix",
> - __func__, inode->i_ino, inode->i_mode);
> + f2fs_warn(sbi, "%s: inode (ino=%lx, mode=%u) reason(%d, %llu, %ld, %d, %d, %lu) should not have inline_data, run fsck to fix",
> + __func__, inode->i_ino, inode->i_mode,
> + f2fs_is_atomic_file(inode),
> + i_size_read(inode), MAX_INLINE_DATA(inode),
> + file_is_encrypt(inode), file_is_verity(inode),
> + F2FS_I(inode)->i_flags & F2FS_COMPR_FL);
> return false;
> }
>
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
next prev parent reply other threads:[~2022-05-08 13:52 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-28 2:49 [f2fs-dev] [PATCH] f2fs: fix to do sanity check for inline inode Chao Yu
2022-05-04 21:28 ` Jaegeuk Kim
2022-05-05 2:49 ` Chao Yu
2022-05-05 3:31 ` Jaegeuk Kim
2022-05-05 14:33 ` Chao Yu
2022-05-08 13:52 ` Chao Yu [this message]
2022-05-09 16:57 ` Jaegeuk Kim
2022-05-13 21:35 ` Jaegeuk Kim
2022-05-13 21:07 ` Jaegeuk Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c717cdc3-bb6f-d437-f039-d05418c9dd88@kernel.org \
--to=chao@kernel.org \
--cc=jaegeuk@kernel.org \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=yanming@tju.edu.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).