From: Jingoo Han <jg1.han@samsung.com>
To: 'Ajay Kumar' <ajaykumar.rs@samsung.com>, linux-fbdev@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org, FlorianSchandinat@gmx.de,
thomas.ab@samsung.com, 'Jingoo Han' <jg1.han@samsung.com>
Subject: Re: [PATCH V3] video: exynos_dp: Add device tree support to DP driver
Date: Thu, 27 Sep 2012 07:58:16 +0000 [thread overview]
Message-ID: <000801cd9c85$d9dfd200$8d9f7600$%han@samsung.com> (raw)
In-Reply-To: <1348515385-22332-1-git-send-email-ajaykumar.rs@samsung.com>
On Tuesday, September 25, 2012 4:36 AM Ajay Kumar wrote
>
> This patch enables device tree based discovery support for DP driver.
> The driver is modified to handle platform data in both the cases:
> with DT and non-DT.
> Documentation is also added for the DT bindings.
>
> DP-PHY should be regarded as a seperate device node while
> being passed from device tree list, and device node for
> DP should contain DP-PHY as child node with property name "dp-phy"
> associated with it.
>
> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Best regards,
Jingoo Han
> ---
> .../devicetree/bindings/video/exynos_dp.txt | 83 ++++++++++
> drivers/video/exynos/exynos_dp_core.c | 168 ++++++++++++++++++--
> drivers/video/exynos/exynos_dp_core.h | 2 +
> 3 files changed, 239 insertions(+), 14 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/video/exynos_dp.txt
>
> diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt
> b/Documentation/devicetree/bindings/video/exynos_dp.txt
> new file mode 100644
> index 0000000..c27f892
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
> @@ -0,0 +1,83 @@
> +Exynos Displayport driver should configure the displayport interface
> +based on the type of panel connected to it.
> +
> +We use two nodes:
> + -dptx_phy node
> + -display-port-controller node
> +
> +For the dp-phy initialization, we use a dptx_phy node.
> +Required properties for dptx_phy:
> + -compatible:
> + Should be "samsung,dp-phy".
> + -samsung,dptx_phy_reg:
> + Base address of DP PHY register.
> + -samsung,enable_bit:
> + The bit used to enable/disable DP PHY.
> +
> +For the Panel initialization, we read data from display-port-controller node.
> +Required properties for display-port-controller:
> + -compatible:
> + Should be "samsung,exynos5-dp".
> + -reg:
> + physical base address of the controller and length
> + of memory mapped region.
> + -interrupts:
> + Internet combiner values.
> + -interrupt-parent:
> + Address of Interrupt combiner node.
> + -dp_phy:
> + Address of dptx_phy node.
> + -samsung,color_space:
> + input video data format.
> + COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
> + -samsung,dynamic_range:
> + dynamic range for input video data.
> + VESA = 0, CEA = 1
> + -samsung,ycbcr_coeff:
> + YCbCr co-efficients for input video.
> + COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1
> + -samsung,color_depth:
> + Bit per color component.
> + COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
> + -samsung,link_rate:
> + link rates supportd by the panel.
> + LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A
> + -samsung,lane_count:
> + number of lanes supported by the panel.
> + LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
> + -samsung,interlaced:
> + Interlace scan mode.
> + Progressive if defined, Interlaced if not defined
> + -samsung,v_sync_polarity:
> + VSYNC polarity configuration.
> + High if defined, Low if not defined
> + -samsung,h_sync_polarity:
> + HSYNC polarity configuration.
> + High if defined, Low if not defined
> +
> +Example:
> +
> +SOC specific portion:
> + dptx_phy: dptx_phy@0x10040720 {
> + compatible = "samsung,dp-phy";
> + samsung,dptx_phy_reg = <0x10040720>;
> + samsung,enable_bit = <1>;
> + };
> +
> + display-port-controller {
> + compatible = "samsung,exynos5-dp";
> + reg = <0x145B0000 0x10000>;
> + interrupts = <10 3>;
> + interrupt-parent = <&combiner>;
> + dp_phy = <&dptx_phy>;
> + };
> +
> +Board Specific portion:
> + display-port-controller {
> + samsung,color_space = <0>;
> + samsung,dynamic_range = <0>;
> + samsung,ycbcr_coeff = <0>;
> + samsung,color_depth = <1>;
> + samsung,link_rate = <0x0a>;
> + samsung,lane_count = <2>;
> + };
> diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
> index cdc1398..bb0f10c 100644
> --- a/drivers/video/exynos/exynos_dp_core.c
> +++ b/drivers/video/exynos/exynos_dp_core.c
> @@ -18,6 +18,7 @@
> #include <linux/io.h>
> #include <linux/interrupt.h>
> #include <linux/delay.h>
> +#include <linux/of.h>
>
> #include <video/exynos_dp.h>
>
> @@ -856,6 +857,106 @@ static irqreturn_t exynos_dp_irq_handler(int irq, void *arg)
> return IRQ_HANDLED;
> }
>
> +#ifdef CONFIG_OF
> +struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
> +{
> + struct device_node *dp_node = dev->of_node;
> + struct exynos_dp_platdata *pd;
> + struct video_info *dp_video_config;
> +
> + pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
> + if (!pd) {
> + dev_err(dev, "memory allocation for pdata failed\n");
> + return ERR_PTR(-ENOMEM);
> + }
> + dp_video_config = devm_kzalloc(dev,
> + sizeof(*dp_video_config), GFP_KERNEL);
> +
> + if (!dp_video_config) {
> + dev_err(dev, "memory allocation for video config failed\n");
> + return ERR_PTR(-ENOMEM);
> + }
> + pd->video_info = dp_video_config;
> +
> + if (of_get_property(dp_node, "samsung,h-sync-polarity", NULL))
> + dp_video_config->h_sync_polarity = 1;
> +
> + if (of_get_property(dp_node, "samsung,v-sync-polarity", NULL))
> + dp_video_config->v_sync_polarity = 1;
> +
> + if (of_get_property(dp_node, "samsung,interlaced", NULL))
> + dp_video_config->interlaced = 1;
> +
> + of_property_read_u32(dp_node, "samsung,color_space",
> + &dp_video_config->color_space);
> +
> + of_property_read_u32(dp_node, "samsung,dynamic_range",
> + &dp_video_config->dynamic_range);
> +
> + of_property_read_u32(dp_node, "samsung,ycbcr_coeff",
> + &dp_video_config->ycbcr_coeff);
> +
> + of_property_read_u32(dp_node, "samsung,color_depth",
> + &dp_video_config->color_depth);
> +
> + of_property_read_u32(dp_node, "samsung,link_rate",
> + &dp_video_config->link_rate);
> +
> + of_property_read_u32(dp_node, "samsung,lane_count",
> + &dp_video_config->lane_count);
> + return pd;
> +}
> +
> +void exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
> +{
> + struct device_node *dp_phy_node;
> + const __be32 *parp;
> + u32 phy_base;
> + void *virt_phy_base;
> +
> + parp = of_get_property(dp->dev->of_node, "dp_phy", NULL);
> + if (!parp) {
> + dp->dp_phy_addr = NULL;
> + return;
> + }
> +
> + dp_phy_node = of_find_node_by_phandle(be32_to_cpup(parp));
> + if (!dp_phy_node) {
> + dp->dp_phy_addr = NULL;
> + return;
> + }
> +
> + of_property_read_u32(dp_phy_node, "samsung,dptx_phy_reg", &phy_base);
> + of_property_read_u32(dp_phy_node, "samsung,enable_bit",
> + &dp->enable_bit);
> + virt_phy_base = ioremap(phy_base, SZ_4);
> + if (!virt_phy_base) {
> + dev_err(dp->dev, "failed to ioremap dp-phy\n");
> + dp->dp_phy_addr = NULL;
> + return;
> + }
> + dp->dp_phy_addr = virt_phy_base;
> +}
> +
> +void exynos_dp_phy_init(struct exynos_dp_device *dp)
> +{
> + u32 reg;
> +
> + reg = __raw_readl(dp->dp_phy_addr);
> + reg |= dp->enable_bit;
> + __raw_writel(reg, dp->dp_phy_addr);
> +}
> +
> +void exynos_dp_phy_exit(struct exynos_dp_device *dp)
> +{
> + u32 reg;
> +
> + reg = __raw_readl(dp->dp_phy_addr);
> + reg &= ~(dp->enable_bit);
> + __raw_writel(reg, dp->dp_phy_addr);
> +}
> +#endif /* CONFIG_OF */
> +
> static int __devinit exynos_dp_probe(struct platform_device *pdev)
> {
> struct resource *res;
> @@ -864,12 +965,6 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
>
> int ret = 0;
>
> - pdata = pdev->dev.platform_data;
> - if (!pdata) {
> - dev_err(&pdev->dev, "no platform data\n");
> - return -EINVAL;
> - }
> -
> dp = devm_kzalloc(&pdev->dev, sizeof(struct exynos_dp_device),
> GFP_KERNEL);
> if (!dp) {
> @@ -879,6 +974,21 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
>
> dp->dev = &pdev->dev;
>
> + if (pdev->dev.of_node) {
> + pdata = exynos_dp_dt_parse_pdata(&pdev->dev);
> + if (IS_ERR(pdata))
> + return PTR_ERR(pdata);
> +
> + exynos_dp_dt_parse_phydata(dp);
> + } else {
> + pdata = pdev->dev.platform_data;
> + }
> +
> + if (!pdata) {
> + dev_err(&pdev->dev, "no platform data\n");
> + return -EINVAL;
> + }
> +
> dp->clock = devm_clk_get(&pdev->dev, "dp");
> if (IS_ERR(dp->clock)) {
> dev_err(&pdev->dev, "failed to get clock\n");
> @@ -909,8 +1019,14 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
> }
>
> dp->video_info = pdata->video_info;
> - if (pdata->phy_init)
> - pdata->phy_init();
> +
> + if (pdev->dev.of_node) {
> + if (dp->dp_phy_addr)
> + exynos_dp_phy_init(dp);
> + } else {
> + if (pdata->phy_init)
> + pdata->phy_init();
> + }
>
> exynos_dp_init_dp(dp);
>
> @@ -953,8 +1069,13 @@ static int __devexit exynos_dp_remove(struct platform_device *pdev)
> struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
> struct exynos_dp_device *dp = platform_get_drvdata(pdev);
>
> - if (pdata && pdata->phy_exit)
> - pdata->phy_exit();
> + if (pdev->dev.of_node) {
> + if (dp->dp_phy_addr)
> + exynos_dp_phy_exit(dp);
> + } else {
> + if (pdata && pdata->phy_exit)
> + pdata->phy_exit();
> + }
>
> clk_disable(dp->clock);
>
> @@ -968,8 +1089,13 @@ static int exynos_dp_suspend(struct device *dev)
> struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
> struct exynos_dp_device *dp = platform_get_drvdata(pdev);
>
> - if (pdata && pdata->phy_exit)
> - pdata->phy_exit();
> + if (dev->of_node) {
> + if (dp->dp_phy_addr)
> + exynos_dp_phy_exit(dp);
> + } else {
> + if (pdata && pdata->phy_exit)
> + pdata->phy_exit();
> + }
>
> clk_disable(dp->clock);
>
> @@ -982,8 +1108,13 @@ static int exynos_dp_resume(struct device *dev)
> struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
> struct exynos_dp_device *dp = platform_get_drvdata(pdev);
>
> - if (pdata && pdata->phy_init)
> - pdata->phy_init();
> + if (dev->of_node) {
> + if (dp->dp_phy_addr)
> + exynos_dp_phy_init(dp);
> + } else {
> + if (pdata && pdata->phy_init)
> + pdata->phy_init();
> + }
>
> clk_enable(dp->clock);
>
> @@ -1013,6 +1144,14 @@ static const struct dev_pm_ops exynos_dp_pm_ops = {
> SET_SYSTEM_SLEEP_PM_OPS(exynos_dp_suspend, exynos_dp_resume)
> };
>
> +#ifdef CONFIG_OF
> +static const struct of_device_id exynos_dp_match[] = {
> + { .compatible = "samsung,exynos5-dp" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, exynos_dp_match);
> +#endif
> +
> static struct platform_driver exynos_dp_driver = {
> .probe = exynos_dp_probe,
> .remove = __devexit_p(exynos_dp_remove),
> @@ -1020,6 +1159,7 @@ static struct platform_driver exynos_dp_driver = {
> .name = "exynos-dp",
> .owner = THIS_MODULE,
> .pm = &exynos_dp_pm_ops,
> + .of_match_table = of_match_ptr(exynos_dp_match),
> },
> };
>
> diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/exynos/exynos_dp_core.h
> index 57b8a65..c9f8c97 100644
> --- a/drivers/video/exynos/exynos_dp_core.h
> +++ b/drivers/video/exynos/exynos_dp_core.h
> @@ -29,6 +29,8 @@ struct exynos_dp_device {
> struct clk *clock;
> unsigned int irq;
> void __iomem *reg_base;
> + void __iomem *dp_phy_addr;
> + unsigned int enable_bit;
>
> struct video_info *video_info;
> struct link_train link_train;
> --
> 1.7.0.4
next prev parent reply other threads:[~2012-09-27 7:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-24 12:45 [PATCH V3] video: exynos_dp: Add device tree support to DP driver Ajay Kumar
2012-09-27 7:58 ` Jingoo Han [this message]
[not found] ` <1348515385-22332-1-git-send-email-ajaykumar.rs-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2012-09-27 13:44 ` Sylwester Nawrocki
2012-09-28 0:11 ` Jingoo Han
2012-09-28 6:48 ` Tomasz Figa
2012-09-28 8:09 ` Jingoo Han
2012-09-28 8:25 ` Sylwester Nawrocki
2012-10-01 5:52 ` Ajay kumar
2012-10-04 1:50 ` Jingoo Han
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000801cd9c85$d9dfd200$8d9f7600$%han@samsung.com' \
--to=jg1.han@samsung.com \
--cc=FlorianSchandinat@gmx.de \
--cc=ajaykumar.rs@samsung.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=thomas.ab@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).