From: Jingoo Han <jg1.han@samsung.com>
To: linux-fbdev@vger.kernel.org
Subject: Re: [PATCH 2/4] backlight/lp855x: Remove platform_data header
Date: Mon, 08 Dec 2014 11:41:29 +0000 [thread overview]
Message-ID: <000b01d012db$e836d5f0$b8a481d0$%han@samsung.com> (raw)
In-Reply-To: <1417805069-20441-2-git-send-email-seanpaul@chromium.org>
On Saturday, December 06, 2014 3:44 AM, Sean Paul wrote:
>
> No one uses lp855x platform data any longer, remove the header
> and move its contents into the driver.
>
> Signed-off-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Best regards,
Jingoo Han
> ---
> MAINTAINERS | 1 -
> drivers/video/backlight/lp855x_bl.c | 37 +++++++++++++++++++++++++-
> include/linux/platform_data/lp855x.h | 51 ------------------------------------
> 3 files changed, 36 insertions(+), 53 deletions(-)
> delete mode 100644 include/linux/platform_data/lp855x.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3c64271..4896edb 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9318,7 +9318,6 @@ M: Milo Kim <milo.kim@ti.com>
> S: Maintained
> F: Documentation/backlight/lp855x-driver.txt
> F: drivers/video/backlight/lp855x_bl.c
> -F: include/linux/platform_data/lp855x.h
>
> TI LP8727 CHARGER DRIVER
> M: Milo Kim <milo.kim@ti.com>
> diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
> index a26d3bb..d19b61c 100644
> --- a/drivers/video/backlight/lp855x_bl.c
> +++ b/drivers/video/backlight/lp855x_bl.c
> @@ -15,7 +15,6 @@
> #include <linux/backlight.h>
> #include <linux/err.h>
> #include <linux/of.h>
> -#include <linux/platform_data/lp855x.h>
> #include <linux/pwm.h>
> #include <linux/regulator/consumer.h>
>
> @@ -63,6 +62,42 @@ struct lp855x_device_config {
> int (*post_init_device)(struct lp855x *);
> };
>
> +enum lp855x_chip_id {
> + LP8550,
> + LP8551,
> + LP8552,
> + LP8553,
> + LP8555,
> + LP8556,
> + LP8557,
> +};
> +
> +struct lp855x_rom_data {
> + u8 addr;
> + u8 val;
> +};
> +
> +/**
> + * struct lp855x_platform_data
> + * @name : Backlight driver name. If it is not defined, default name is set.
> + * @device_control : value of DEVICE CONTROL register
> + * @initial_brightness : initial value of backlight brightness
> + * @period_ns : platform specific pwm period value. unit is nano.
> + Only valid when mode is PWM_BASED.
> + * @size_program : total size of lp855x_rom_data
> + * @rom_data : list of new eeprom/eprom registers
> + * @supply : regulator that supplies 3V input
> + */
> +struct lp855x_platform_data {
> + const char *name;
> + u8 device_control;
> + u8 initial_brightness;
> + unsigned int period_ns;
> + int size_program;
> + struct lp855x_rom_data *rom_data;
> + struct regulator *supply;
> +};
> +
> struct lp855x {
> const char *chipname;
> enum lp855x_chip_id chip_id;
> diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
> deleted file mode 100644
> index 9e3ac3c..0000000
> --- a/include/linux/platform_data/lp855x.h
> +++ /dev/null
> @@ -1,51 +0,0 @@
> -/*
> - * LP855x Backlight Driver
> - *
> - * Copyright (C) 2011 Texas Instruments
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - *
> - */
> -
> -#ifndef _LP855X_H
> -#define _LP855X_H
> -
> -enum lp855x_chip_id {
> - LP8550,
> - LP8551,
> - LP8552,
> - LP8553,
> - LP8555,
> - LP8556,
> - LP8557,
> -};
> -
> -struct lp855x_rom_data {
> - u8 addr;
> - u8 val;
> -};
> -
> -/**
> - * struct lp855x_platform_data
> - * @name : Backlight driver name. If it is not defined, default name is set.
> - * @device_control : value of DEVICE CONTROL register
> - * @initial_brightness : initial value of backlight brightness
> - * @period_ns : platform specific pwm period value. unit is nano.
> - Only valid when mode is PWM_BASED.
> - * @size_program : total size of lp855x_rom_data
> - * @rom_data : list of new eeprom/eprom registers
> - * @supply : regulator that supplies 3V input
> - */
> -struct lp855x_platform_data {
> - const char *name;
> - u8 device_control;
> - u8 initial_brightness;
> - unsigned int period_ns;
> - int size_program;
> - struct lp855x_rom_data *rom_data;
> - struct regulator *supply;
> -};
> -
> -#endif
> --
> 2.2.0.rc0.207.ga3a616c
prev parent reply other threads:[~2014-12-08 11:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-05 18:44 [PATCH 2/4] backlight/lp855x: Remove platform_data header Sean Paul
2014-12-08 11:41 ` Jingoo Han [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000b01d012db$e836d5f0$b8a481d0$%han@samsung.com' \
--to=jg1.han@samsung.com \
--cc=linux-fbdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).