From: Jingoo Han <jg1.han@samsung.com>
To: linux-fbdev@vger.kernel.org
Subject: [PATCH 1/3] video: exynos_dp: use devm_ functions
Date: Fri, 25 May 2012 07:20:45 +0000 [thread overview]
Message-ID: <001d01cd3a46$e68d8b10$b3a8a130$%han@samsung.com> (raw)
The devm_ functions allocate memory that is released when a driver
detaches. This makes the code smaller and a bit simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
drivers/video/exynos/exynos_dp_core.c | 49 ++++++++-------------------------
drivers/video/exynos/exynos_dp_core.h | 1 -
2 files changed, 12 insertions(+), 38 deletions(-)
diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
index ef4d1ab..aabd214 100644
--- a/drivers/video/exynos/exynos_dp_core.c
+++ b/drivers/video/exynos/exynos_dp_core.c
@@ -858,7 +858,8 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
return -EINVAL;
}
- dp = kzalloc(sizeof(struct exynos_dp_device), GFP_KERNEL);
+ dp = devm_kzalloc(&pdev->dev, sizeof(struct exynos_dp_device),
+ GFP_KERNEL);
if (!dp) {
dev_err(&pdev->dev, "no memory for device data\n");
return -ENOMEM;
@@ -869,8 +870,7 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
dp->clock = clk_get(&pdev->dev, "dp");
if (IS_ERR(dp->clock)) {
dev_err(&pdev->dev, "failed to get clock\n");
- ret = PTR_ERR(dp->clock);
- goto err_dp;
+ return PTR_ERR(dp->clock);
}
clk_enable(dp->clock);
@@ -882,35 +882,25 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
goto err_clock;
}
- res = request_mem_region(res->start, resource_size(res),
- dev_name(&pdev->dev));
- if (!res) {
- dev_err(&pdev->dev, "failed to request registers region\n");
- ret = -EINVAL;
- goto err_clock;
- }
-
- dp->res = res;
-
- dp->reg_base = ioremap(res->start, resource_size(res));
+ dp->reg_base = devm_request_and_ioremap(&pdev->dev, res);
if (!dp->reg_base) {
dev_err(&pdev->dev, "failed to ioremap\n");
ret = -ENOMEM;
- goto err_req_region;
+ goto err_clock;
}
dp->irq = platform_get_irq(pdev, 0);
if (!dp->irq) {
dev_err(&pdev->dev, "failed to get irq\n");
ret = -ENODEV;
- goto err_ioremap;
+ goto err_clock;
}
- ret = request_irq(dp->irq, exynos_dp_irq_handler, 0,
- "exynos-dp", dp);
+ ret = devm_request_irq(&pdev->dev, dp->irq, exynos_dp_irq_handler, 0,
+ "exynos-dp", dp);
if (ret) {
dev_err(&pdev->dev, "failed to request irq\n");
- goto err_ioremap;
+ goto err_clock;
}
dp->video_info = pdata->video_info;
@@ -922,7 +912,7 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
ret = exynos_dp_detect_hpd(dp);
if (ret) {
dev_err(&pdev->dev, "unable to detect hpd\n");
- goto err_irq;
+ goto err_clock;
}
exynos_dp_handle_edid(dp);
@@ -931,7 +921,7 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
dp->video_info->link_rate);
if (ret) {
dev_err(&pdev->dev, "unable to do link train\n");
- goto err_irq;
+ goto err_clock;
}
exynos_dp_enable_scramble(dp, 1);
@@ -945,23 +935,15 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
ret = exynos_dp_config_video(dp, dp->video_info);
if (ret) {
dev_err(&pdev->dev, "unable to config video\n");
- goto err_irq;
+ goto err_clock;
}
platform_set_drvdata(pdev, dp);
return 0;
-err_irq:
- free_irq(dp->irq, dp);
-err_ioremap:
- iounmap(dp->reg_base);
-err_req_region:
- release_mem_region(res->start, resource_size(res));
err_clock:
clk_put(dp->clock);
-err_dp:
- kfree(dp);
return ret;
}
@@ -974,16 +956,9 @@ static int __devexit exynos_dp_remove(struct platform_device *pdev)
if (pdata && pdata->phy_exit)
pdata->phy_exit();
- free_irq(dp->irq, dp);
- iounmap(dp->reg_base);
-
clk_disable(dp->clock);
clk_put(dp->clock);
- release_mem_region(dp->res->start, resource_size(dp->res));
-
- kfree(dp);
-
return 0;
}
diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/exynos/exynos_dp_core.h
index 519c3a6..8f596b9 100644
--- a/drivers/video/exynos/exynos_dp_core.h
+++ b/drivers/video/exynos/exynos_dp_core.h
@@ -26,7 +26,6 @@ struct link_train {
struct exynos_dp_device {
struct device *dev;
- struct resource *res;
struct clk *clock;
unsigned int irq;
void __iomem *reg_base;
--
1.7.1
next reply other threads:[~2012-05-25 7:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-25 7:20 Jingoo Han [this message]
2012-05-29 15:06 ` [PATCH 1/3] video: exynos_dp: use devm_ functions Florian Tobias Schandinat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001d01cd3a46$e68d8b10$b3a8a130$%han@samsung.com' \
--to=jg1.han@samsung.com \
--cc=linux-fbdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).