From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jingoo Han Date: Mon, 15 Oct 2012 09:57:51 +0000 Subject: [PATCH V7 2/2] video: exynos_dp: device tree documentation Message-Id: <00a301cdaabb$8a38d8c0$9eaa8a40$%han@samsung.com> List-Id: References: <00a201cdaabb$5f6eb6f0$1e4c24d0$%han@samsung.com> In-Reply-To: <00a201cdaabb$5f6eb6f0$1e4c24d0$%han@samsung.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: 'Florian Tobias Schandinat' Cc: linux-fbdev@vger.kernel.org, linux-samsung-soc@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, 'Ajay Kumar' , 'Sylwester Nawrocki' , 'Tomasz Figa' , 'Thomas Abraham' , 'Jingoo Han' From: Ajay Kumar Add documentation for the DT bindings in exynos display port driver. Signed-off-by: Ajay Kumar Signed-off-by: Jingoo Han --- No changes since v6: .../devicetree/bindings/video/exynos_dp.txt | 80 ++++++++++++++++++++ 1 files changed, 80 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/video/exynos_dp.txt diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt new file mode 100644 index 0000000..7cc7d9f --- /dev/null +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt @@ -0,0 +1,80 @@ +The Exynos display port interface should be configured based on +the type of panel connected to it. + +We use two nodes: + -display-port-controller node + -dptx-phy node(defined inside display-port-controller node) + +For the DP-PHY initialization, we use the dptx-phy node. +Required properties for dptx-phy: + -reg: + Base address of DP PHY register. + -samsung,enable-mask: + The bit-mask used to enable/disable DP PHY. + +For the Panel initialization, we read data from display-port-controller node. +Required properties for display-port-controller: + -compatible: + should be "samsung,exynos5-dp". + -reg: + physical base address of the controller and length + of memory mapped region. + -interrupts: + interrupt combiner values. + -interrupt-parent: + phandle to Interrupt combiner node. + -samsung,color-space: + input video data format. + COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2 + -samsung,dynamic-range: + dynamic range for input video data. + VESA = 0, CEA = 1 + -samsung,ycbcr-coeff: + YCbCr co-efficients for input video. + COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1 + -samsung,color-depth: + number of bits per colour component. + COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3 + -samsung,link-rate: + link rate supported by the panel. + LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A + -samsung,lane-count: + number of lanes supported by the panel. + LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4 + +Optional properties for display-port-controller: + -interlaced: + interlace scan mode. + Progressive if defined, Interlaced if not defined + -vsync-active-high: + VSYNC polarity configuration. + High if defined, Low if not defined + -hsync-active-high: + HSYNC polarity configuration. + High if defined, Low if not defined + +Example: + +SOC specific portion: + display-port-controller { + compatible = "samsung,exynos5-dp"; + reg = <0x145b0000 0x10000>; + interrupts = <10 3>; + interrupt-parent = <&combiner>; + + dptx-phy { + reg = <0x10040720>; + samsung,enable-mask = <1>; + }; + + }; + +Board Specific portion: + display-port-controller { + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; + }; -- 1.7.1