From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jingoo Han Date: Thu, 01 Nov 2012 10:26:46 +0000 Subject: [PATCH v3 6/8] video: exynos_dp: Remove sink control to D0 Message-Id: <012401cdb81b$65127a70$2f376f50$%han@samsung.com> List-Id: References: <012201cdb81a$f3117340$d93459c0$%han@samsung.com> In-Reply-To: <012201cdb81a$f3117340$d93459c0$%han@samsung.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-fbdev@vger.kernel.org From: Sean Paul According to DP spec, it is not required in the Link Training procedure. [jg1.han@samsung.com: modified the commit message] Signed-off-by: Sean Paul Signed-off-by: Jingoo Han --- Add 'From: Sean Paul ' drivers/video/exynos/exynos_dp_core.c | 6 ------ 1 files changed, 0 insertions(+), 6 deletions(-) diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c index 8ab95c3..c2b6bf2 100644 --- a/drivers/video/exynos/exynos_dp_core.c +++ b/drivers/video/exynos/exynos_dp_core.c @@ -277,12 +277,6 @@ static int exynos_dp_link_start(struct exynos_dp_device *dp) for (lane = 0; lane < lane_count; lane++) dp->link_train.cr_loop[lane] = 0; - /* Set sink to D0 (Sink Not Ready) mode. */ - retval = exynos_dp_write_byte_to_dpcd(dp, DPCD_ADDR_SINK_POWER_STATE, - DPCD_SET_POWER_STATE_D0); - if (retval) - return retval; - /* Set link rate and count as you want to establish*/ exynos_dp_set_link_bandwidth(dp, dp->link_train.link_rate); exynos_dp_set_lane_count(dp, dp->link_train.lane_count); -- 1.7.1