Linux version 2.5.66-4 (root@tiger) (gcc version 3.2.2 20030217 (Red Hat Linux 8.0 3.2.2-2)) #2 Wed Mar 26 16:29:58 EST 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000ff77000 (usable) BIOS-e820: 000000000ff77000 - 000000000ff79000 (ACPI NVS) BIOS-e820: 000000000ff79000 - 0000000010000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65399 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61303 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 ACPI: RSDP (v000 DELL ) @ 0x000fd560 ACPI: RSDT (v001 DELL 8200 00000.00008) @ 0x000fd574 ACPI: FADT (v001 DELL 8200 00000.00008) @ 0x000fd5a8 ACPI: SSDT (v001 DELL st_ex 00000.04096) @ 0xfffe5d64 ACPI: MADT (v001 DELL 8200 00000.00008) @ 0x000fd61c ACPI: BOOT (v001 DELL 8200 00000.00008) @ 0x000fd678 ACPI: DSDT (v001 DELL dt_ex 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist Building zonelist for node : 0 Kernel command line: ro root=/dev/hda6 hdc=ide-scsi video=radeonfb ide_setup: hdc=ide-scsi Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 1993.614 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 3932.16 BogoMIPS Memory: 256136k/261596k available (1349k kernel code, 4768k reserved, 302k data, 272k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available Machine check exception polling timer started. CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mtrr: v2.0 (20020519) PCI: PCI BIOS revision 2.10 entry at 0xfbeae, last bus=2 PCI: Using configuration type 1 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030228 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Br ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15, disabled) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15, disabled) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15, disabled) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15) block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 15 exit congestion at 17 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x80 Enabling SEP on CPU 0 VFS: Disk quotas dquot_6.5.1 Journalled Block Device driver loaded radeonfb_pci_register BEGIN radeonfb: ref_clk=2700, ref_div=12, xclk=23000 defaults radeonfb: probed DDR SGRAM 65536k videoram radeon_get_moninfo: bios 4 scratch = 2000002 radeonfb: ATI Radeon 7500 QW DDR SGRAM 64 MB radeonfb: DVI port no monitor connected radeonfb: CRT port CRT monitor connected radeonfb_pci_register END hStart = 664, hEnd = 760, hTotal = 800 vStart = 491, vEnd = 493, vTotal = 525 h_total_disp = 0x4f0063 hsync_strt_wid = 0x8c02a2 v_total_disp = 0x1df020c vsync_strt_wid = 0x8201ea post div = 0x8 fb_div = 0x59 ppll_div_3 = 0x30059 ron = 712, roff = 16464 vclk_freq = 2503, per = 588 Console: switching to colour frame buffer device 80x30 pty: 2048 Unix98 ptys configured Real Time Clock Driver v1.11 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 00:1f.1 ICH2: chipset revision 4 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: MAXTOR 6L040L2, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: HL-DT-ST GCE-8400B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=77557/16/63, UDMA(100) hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > Console: switching to colour frame buffer device 80x30 mice: PS/2 mouse device common for all mice input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 272k freed drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.0 PCI: Setting latency timer of device 00:1f.2 to 64 uhci-hcd 00:1f.2: Intel Corp. 82801BA/BAM USB (Hub uhci-hcd 00:1f.2: irq 11, io base 0000ff80 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. uhci-hcd 00:1f.2: new USB bus registered, assigned bus number 1 hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected PCI: Setting latency timer of device 00:1f.4 to 64 uhci-hcd 00:1f.4: Intel Corp. 82801BA/BAM USB (Hub uhci-hcd 00:1f.4: irq 9, io base 0000ff60 uhci-hcd 00:1f.4: new USB bus registered, assigned bus number 2 hub 2-0:0: USB hub found hub 2-0:0: 2 ports detected Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,6), internal journal Adding 530104k swap on /dev/hda7. Priority:-1 extents:1 NTFS driver 2.1.0 [Flags: R/O MODULE]. NTFS volume version 3.1. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. SCSI subsystem initialized scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HL-DT-ST Model: CD-RW GCE-8400B Rev: B104 Type: CD-ROM ANSI SCSI revision: 02 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (2043 buckets, 16344 max) - 160 bytes per conntrack 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 02:08.0: 3Com PCI 3c905C Tornado at 0xdc80. Vers LK1.1.19