From mboxrd@z Thu Jan 1 00:00:00 1970 From: Benjamin Herrenschmidt Subject: Re: [RADEON] Connector type Date: Thu, 28 Aug 2003 19:02:36 +0200 Sender: linux-fbdev-devel-admin@lists.sourceforge.net Message-ID: <1062090156.612.144.camel@gaston> References: <20030828162025.GA7317@dreamland.darkstar.lan> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: Received: from sc8-sf-mx1-b.sourceforge.net ([10.3.1.11] helo=sc8-sf-mx1.sourceforge.net) by sc8-sf-list1.sourceforge.net with esmtp (Cipher TLSv1:DES-CBC3-SHA:168) (Exim 3.31-VA-mm2 #1 (Debian)) id 19sQBJ-0005U0-00 for ; Thu, 28 Aug 2003 10:03:33 -0700 Received: from pentafluge.infradead.org ([213.86.99.235]) by sc8-sf-mx1.sourceforge.net with esmtp (TLSv1:AES256-SHA:256) (Exim 4.22) id 19sQBI-000824-Ir for linux-fbdev-devel@lists.sourceforge.net; Thu, 28 Aug 2003 10:03:32 -0700 In-Reply-To: <20030828162025.GA7317@dreamland.darkstar.lan> Errors-To: linux-fbdev-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Id: List-Unsubscribe: , List-Archive: Content-Type: text/plain; charset="us-ascii" To: kronos@kronoz.cjb.net Cc: Linux Fbdev development list , Jon Smirl On Thu, 2003-08-28 at 18:20, Kronos wrote: > Hi, > currently DDCReg in radeonfb is hardcoded to CRT port (secondary port, > primary DAC). > > I've working code to detect connector type. On my board it finds the CRT > port and DVI port. The latter is ignored because dviDisp_type is > MT_NONE. If crtDisp_type is MT_NONE then it will use the DVI port. > > What should I do if both port are in use? Read EDID from primary port > and ignore secondary? What about a module/kernel option ? In the meantime, I'm working on dual head support, though I'm not sure I'll have that finished soon. Ben. ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf