* Re: [Fwd: AtyFB in 2.6.10, still not perfect]
@ 2005-03-15 10:26 Antonino A. Daplas
2005-03-15 19:40 ` Luigi Gangitano
2005-03-15 20:39 ` Antonino A. Daplas
0 siblings, 2 replies; 9+ messages in thread
From: Antonino A. Daplas @ 2005-03-15 10:26 UTC (permalink / raw)
To: Luigi Gangitano, adaplas; +Cc: Alexander Kern, Linux Fbdev development list
--- Luigi Gangitano <luigi@debian.org> wrote:
> Hi,
> David S. Miller told me to forward this information
> to you. I'm using
I don't have any hardware for this driver, and never really contributed
anything to its development, except for a few patches that are quite
obvious.
I'll CC the linux-fbdev list as well as Alex Kern.
In the meantime, can you try the ff:
1. enable/disable CONFIG_FB_ATY_XL_INIT in your kernel
config and see if that makes a difference.
2. Try using fbset to adjust the display settings, or pick a new
mode. Remember to set csync to high.
3. Does xfree86 manifest the same problem if atyfb is off?
4. Can you post the dmesg, config and fbset -i of both the
working and non-working kernel?
Tony
> Debian/sparc on a SunBlade 100. AtyFB worked fine
> with 2.6.8 and broke
> (as known) with 2.6.10. Latest 2.6.10 source in
> debian adds the fix that
> was integrated in 2.6.11, from
>
>
> http://lists.debian.org/debian-sparc/2005/02/msg00063.html
>
> atyfb works now with 2.6.10 but the output is
> garbled.
>
> Please let me know if I can help with more
> informations.
>
> Regards,
>
> L
>
>
> ------- Messaggio inoltrato -------
> > Da: Luigi Gangitano <luigi@debian.org>
> > A: debian-sparc@lists.debian.org
> > Oggetto: AtyFB in 2.6.10, still not perfect
> > Data: Mon, 14 Mar 2005 23:50:02 +0100
> > Hi all,
> > I've just upgraded to the latest
> kernel-source-2.6.10 and recompiled it.
> > AtyFB on my SB100 works now (sort of), but the
> console misses the first
> > column on the left and some random pixels are
> corrupted. Under XFree86
> > I've got the same corruption of randome areas of
> the screen (I'll try to
> > get some screenshot if this is of help).
> >
> > This is the relevant output of kernel (really I
> still don't know how to
> > interpret it... :-)):
> >
> > atyfb: 3D RAGE XL (Mach64 GR, PCI-33MHz) [0x4752
> rev 0x27]
> > atyfb: 8M SDRAM (1:1), 29.498928 MHz XTAL, 230 MHz
> PLL, 83 Mhz MCLK, 63
> > MHz XCLK
> > atyfb: setting up CRTC
> > atyfb: set primary CRT to 1152x900 NN composite P
> > atyfb: CRTC_H_TOTAL_DISP: 8f00be
> > atyfb: CRTC_H_SYNC_STRT_WID: 300296
> > atyfb: CRTC_V_TOTAL_DISP: 38303a8
> > atyfb: CRTC_V_SYNC_STRT_WID: 240385
> > atyfb: CRTC_OFF_PITCH: 24000000
> > atyfb: CRTC_VLINE_CRNT_VLINE: 0
> > atyfb: CRTC_GEN_CNTL: b000210
> > atyfb: atyfb_set_par
> > atyfb: Set Visible Mode to 1152x900-8
> > atyfb: Virtual resolution 1152x7246,
> pixclock_in_ps 10644 (calculated
> > 10644)
> > atyfb: Dot clock: 93 MHz
> > atyfb: Horizontal sync: 61 kHz
> > atyfb: Vertical refresh: 65 Hz
> > atyfb: x style: 93.10108 1152 1210 1338 1528
> 900 902 906 937
> > atyfb: fb style: 10644 190 1152 58 128 31 900 2
> 4
> > debug atyfb: Mach64 non-shadow register values:
> > debug atyfb: 0x2000: 008F00BE 00300296 038303A8
> 00240385
> > debug atyfb: 0x2010: 03880000 24000000 08000001
> 0B002210
> > debug atyfb: 0x2020: 003A0556 01200522 00000000
> 00000000
> > debug atyfb: 0x2030: 00000000 00110202 00000000
> 0000C001
> > debug atyfb: 0x2040: 00000000 00000000 00000000
> 00000000
> > debug atyfb: 0x2050: 00000000 00000000 00000000
> 00000000
> > debug atyfb: 0x2060: 36BB3121 24FBA121 00000000
> 00000000
> > debug atyfb: 0x2070: 00000000 00000000 01003300
> 00050000
> > debug atyfb: 0x2080: 00000000 00000000 00000000
> 00000000
> > debug atyfb: 0x2090: 00803000 00000000 00000100
> 00000000
> > debug atyfb: 0x20A0: 7B23A040 00000101 007F8091
> E5000C81
> > debug atyfb: 0x20B0: 10151A3B 00010000 00010000
> 00000000
> > debug atyfb: 0x20C0: 00FF0000 86010182 00000000
> 00000000
> > debug atyfb: 0x20D0: 00000100 00000008 00000000
> 000000C2
> > debug atyfb: 0x20E0: 27004752 00400014 00000000
> 00000000
> > debug atyfb: 0x20F0: 00000000 0000B14D 037FFCF8
> 00000000
> >
> > debug atyfb: Mach64 PLL register values:
> > debug atyfb: 0x00: ADD541E4 8A0301CF 8E9E6501
> 801B0000
> > debug atyfb: 0x10: 06CF4000 10B6AC10 408024FD
> 00000002
> > debug atyfb: 0x20: 06AC06AC 1424FD00 00255500
> 00000000
> > debug atyfb: 0x30: 00000000 00000000 00000000
> 00000000
> >
> > Console: switching to colour frame buffer device
> 144x56
> > atyfb: fb0: ATY Mach64 frame buffer device on PCI
> >
> > Regards,
> >
> --
> Luigi Gangitano -- <luigi@debian.org> --
> <gangitano@lugroma3.org>
> GPG: 1024D/924C0C26: 12F8 9C03 89D3 DB4A 9972 C24A
> F19B A618 924C 0C26
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Fwd: AtyFB in 2.6.10, still not perfect]
2005-03-15 10:26 [Fwd: AtyFB in 2.6.10, still not perfect] Antonino A. Daplas
@ 2005-03-15 19:40 ` Luigi Gangitano
2005-03-15 20:39 ` Antonino A. Daplas
1 sibling, 0 replies; 9+ messages in thread
From: Luigi Gangitano @ 2005-03-15 19:40 UTC (permalink / raw)
To: adaplas; +Cc: adaplas, Alexander Kern, Linux Fbdev development list
[-- Attachment #1.1: Type: text/plain, Size: 1473 bytes --]
Il giorno mar, 15-03-2005 alle 18:26 +0800, Antonino A. Daplas ha
scritto:
> I don't have any hardware for this driver, and never really contributed
> anything to its development, except for a few patches that are quite
> obvious.
>
> I'll CC the linux-fbdev list as well as Alex Kern.
>
> In the meantime, can you try the ff:
>
> 1. enable/disable CONFIG_FB_ATY_XL_INIT in your kernel
> config and see if that makes a difference.
This makes no difference.
> 2. Try using fbset to adjust the display settings, or pick a new
> mode. Remember to set csync to high.
I tried all the available modes in /etc/fb.modes (always with csync
high) and every time the display is corrupted)
> 3. Does xfree86 manifest the same problem if atyfb is off?
If atyfb is off (not compiled) XFree86 doesn't start at all:
(==) ATI(0): Chipset: "ati".
(**) ATI(0): Depth 16, (--) framebuffer bpp 16
(EE) ATI(0): Adapter has not been initialised.
(II) UnloadModule: "ati"
(II) UnloadModule: "atimisc"
> 4. Can you post the dmesg, config and fbset -i of both the
> working and non-working kernel?
Find them attached. Working kernel is 2.6.8, not working is 2.6.10.
The only difference I see is the hsync high set in 2.6.8, but I could
not find a way to activate it with the 2.6.10.
Regards,
--
Luigi Gangitano -- <luigi@debian.org> -- <gangitano@lugroma3.org>
GPG: 1024D/924C0C26: 12F8 9C03 89D3 DB4A 9972 C24A F19B A618 924C 0C26
[-- Attachment #1.2: 2.6.10-config --]
[-- Type: text/plain, Size: 30418 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10
# Mon Mar 14 03:03:14 2005
#
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_TIME_INTERPOLATION=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# General machine setup
#
# CONFIG_BBC_I2C is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_PROC_INTF is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_24_API is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_US3_FREQ is not set
CONFIG_US2E_FREQ=y
CONFIG_SPARC64=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
CONFIG_SUN_AUXIO=y
CONFIG_SUN_IO=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_RTC=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_UID16=y
CONFIG_BINFMT_ELF32=y
# CONFIG_BINFMT_AOUT32 is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_SOLARIS_EMUL=m
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_SUNBPP=m
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
CONFIG_PRINTER=m
CONFIG_ENVCTRL=m
CONFIG_DISPLAY7SEG=m
# CONFIG_CMDLINE_BOOL is not set
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_BW2 is not set
# CONFIG_FB_CG3 is not set
# CONFIG_FB_CG6 is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_XL_INIT=y
CONFIG_FB_ATY_GX=y
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_SBUS=y
CONFIG_FB_FFB=y
# CONFIG_FB_TCX is not set
# CONFIG_FB_CG14 is not set
# CONFIG_FB_P9100 is not set
# CONFIG_FB_LEO is not set
CONFIG_FB_PCI=y
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_PROM_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_SUN8x16=y
# CONFIG_FONT_SUN12x22 is not set
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_SUN_CLUT224=y
#
# Serial drivers
#
#
# Non-8250 serial port support
#
CONFIG_SERIAL_SUNCORE=y
CONFIG_SERIAL_SUNZILOG=y
CONFIG_SERIAL_SUNZILOG_CONSOLE=y
CONFIG_SERIAL_SUNSU=y
CONFIG_SERIAL_SUNSU_CONSOLE=y
CONFIG_SERIAL_SUNSAB=y
CONFIG_SERIAL_SUNSAB_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
#
# Misc Linux/SPARC drivers
#
CONFIG_SUN_OPENPROMIO=y
CONFIG_SUN_MOSTEK_RTC=y
CONFIG_OBP_FLASH=m
# CONFIG_SUN_BPP is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_IDEDMA_ONLYDISK=y
# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLOGICPTI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SUNESP is not set
#
# Fibre Channel support
#
# CONFIG_FC4 is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
CONFIG_IP_NF_COMPAT_IPFWADM=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
# CONFIG_ETHERTAP is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
CONFIG_SUNQE=m
CONFIG_SUNGEM=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
CONFIG_E100_NAPI=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Unix98 PTY support
#
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# XFree86 DRI support
#
CONFIG_DRM=y
CONFIG_DRM_FFB=m
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_SPARCSPKR=m
# CONFIG_INPUT_UINPUT is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_SECURITY=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ASFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_BIT32_EMUL=m
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_ALI5451=m
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# ALSA Sparc devices
#
CONFIG_SND_SUN_AMD7930=m
CONFIG_SND_SUN_CS4231=m
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_RW_DETECT=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_HPUSBSCSI=m
#
# USB Multimedia devices
#
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
#
# USB Host-to-Host Cables
#
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_GENESYS=y
CONFIG_USB_NET1080=y
CONFIG_USB_PL2301=y
CONFIG_USB_KC2190=y
#
# Intelligent USB Devices/Gadgets
#
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_ZAURUS=y
CONFIG_USB_CDCETHER=y
#
# USB Network Adapters
#
CONFIG_USB_AX8817X=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_DCFLUSH is not set
# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_BOOTMEM is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
[-- Attachment #1.3: 2.6.10-dmesg --]
[-- Type: text/plain, Size: 11642 bytes --]
PROMLIB: Sun IEEE Boot Prom 4.0.45 2001/02/08 14:33
Linux version 2.6.10 (root@gladio) (gcc version 3.3.5 (Debian 1:3.3.5-10)) #1 Mon Mar 14 03:27:43 CET 2005
ARCH: SUN4U
Ethernet address: 00:03:ba:11:76:3d
On node 0 totalpages: 97535
DMA zone: 97535 pages, LIFO batch:8
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/hdc2 ro
PID hash table entries: 4096 (order: 12, 131072 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 6, 524288 bytes)
Memory: 769216k available (2552k kernel code, 936k data, 144k init) [fffff80000000000,000000004fef6000]
Calibrating delay loop... 997.37 BogoMIPS (lpj=498688)
Mount-cache hash table entries: 512 (order: 0, 8192 bytes)
NET: Registered protocol family 16
PCI: Probing for controllers.
PCI: Found SABRE, main regs at 000001fe00000000, wsync at 000001fe00001c20
SABRE: Shared PCI config space at 000001fe01000000
SABRE: DVMA at c0000000 [20000000]
PCI-IRQ: Routing bus[ 0] slot[ 8] map[0] to INO[23]
PCI-IRQ: Routing bus[ 0] slot[ c] map[0] to INO[06]
PCI-IRQ: Routing bus[ 0] slot[ c] map[0] to INO[1c]
PCI-IRQ: Routing bus[ 0] slot[ c] map[0] to INO[24]
PCI-IRQ: Routing bus[ 0] slot[ d] map[0] to INO[0c]
PCI-IRQ: Routing bus[ 0] slot[13] map[0] to INO[0f]
PCI-IRQ: Routing bus[ 1] slot[ 2] map[0] to INO[15]
PCI0(PBMA): Bus running at 33MHz
isa0: [dma -> (floppy) (parallel)] [power] [serial] [serial]
ebus0: [flashprom] [eeprom] [idprom]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
Initializing Cryptographic API
Activating ISA DMA hang workarounds.
atyfb: 3D RAGE XL (Mach64 GR, PCI-33MHz) [0x4752 rev 0x27]
atyfb: 8M SDRAM (1:1), 29.498928 MHz XTAL, 230 MHz PLL, 83 Mhz MCLK, 63 MHz XCLK
atyfb: setting up CRTC
atyfb: set primary CRT to 1152x900 NN composite P
atyfb: CRTC_H_TOTAL_DISP: 8f00be
atyfb: CRTC_H_SYNC_STRT_WID: 300296
atyfb: CRTC_V_TOTAL_DISP: 38303a8
atyfb: CRTC_V_SYNC_STRT_WID: 240385
atyfb: CRTC_OFF_PITCH: 24000000
atyfb: CRTC_VLINE_CRNT_VLINE: 0
atyfb: CRTC_GEN_CNTL: b000210
atyfb: atyfb_set_par
atyfb: Set Visible Mode to 1152x900-8
atyfb: Virtual resolution 1152x7246, pixclock_in_ps 10644 (calculated 10644)
atyfb: Dot clock: 93 MHz
atyfb: Horizontal sync: 61 kHz
atyfb: Vertical refresh: 65 Hz
atyfb: x style: 93.10108 1152 1210 1338 1528 900 902 906 937
atyfb: fb style: 10644 190 1152 58 128 31 900 2 4
debug atyfb: Mach64 non-shadow register values:
debug atyfb: 0x2000: 008F00BE 00300296 038303A8 00240385
debug atyfb: 0x2010: 03880000 24000000 08000001 0B002210
debug atyfb: 0x2020: 003A0556 01200522 00000000 00000000
debug atyfb: 0x2030: 00000000 00110202 00000000 0000C001
debug atyfb: 0x2040: 00000000 00000000 00000000 00000000
debug atyfb: 0x2050: 00000000 00000000 00000000 00000000
debug atyfb: 0x2060: B61A3133 A6FBA635 00000000 00000000
debug atyfb: 0x2070: 00000000 00000000 01003300 00050000
debug atyfb: 0x2080: 00000000 00000000 00000000 00000000
debug atyfb: 0x2090: 00803000 00000000 00000100 00000000
debug atyfb: 0x20A0: 7B23A040 00000101 007F8091 E5000C81
debug atyfb: 0x20B0: 10151A3B 00010000 00010000 00000000
debug atyfb: 0x20C0: 00FF0000 86010182 00000000 00000000
debug atyfb: 0x20D0: 00000100 00000008 00000000 000000C2
debug atyfb: 0x20E0: 27004752 00400014 00000000 00000000
debug atyfb: 0x20F0: 00000000 0000B84D 037FFCF8 00000000
debug atyfb: Mach64 PLL register values:
debug atyfb: 0x00: ADD541E4 8A0301CF 8E9E6501 801B0000
debug atyfb: 0x10: 06CF4000 10B6AC10 408024FD 00000002
debug atyfb: 0x20: 06AC06AC 1424FD00 00255500 00000000
debug atyfb: 0x30: 00000000 00000000 00000000 00000000
Console: switching to colour frame buffer device 144x56
atyfb: fb0: ATY Mach64 frame buffer device on PCI
rtc_init: no PC rtc found
ttyS0 at MMIO 0x1fe020003f8 (irq = 8025056) is a 16550A
ttyS1 at MMIO 0x1fe020002e8 (irq = 8025056) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
elevator: using anticipatory as default io scheduler
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 0000:00:0d.0
ALI15X3: chipset revision 195
ALI15X3: 100% native mode on irq 4,7cc
ide0: BM-DMA at 0x1fe02000a20-0x1fe02000a27, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1fe02000a28-0x1fe02000a2f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: ST320011A, ATA DISK drive
hdb: LTN486S, ATAPI CD/DVD-ROM drive
ide0 at 0x1fe02000a00-0x1fe02000a07,0x1fe02000a1a on irq 4,7cc
Probing IDE interface ide1...
hdc: FUJITSU MPE3170AT, ATA DISK drive
ide1 at 0x1fe02000a10-0x1fe02000a17,0x1fe02000a0a on irq 4,7cc
hda: max request size: 128KiB
hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(66)
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda8
hdc: max request size: 128KiB
hdc: 33360580 sectors (17080 MB) w/2048KiB Cache, CHS=33095/16/63, UDMA(33)
hdc: cache flushes not supported
hdc: hdc1 hdc2 hdc3 hdc4
hdb: ATAPI 48X CD-ROM drive, 120kB Cache
Uniform CD-ROM driver Revision: 3.20
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
SABRE0: Uncorrectable Error, primary error type[DMA Write:Translation Error]
SABRE0: bytemask[00ff] dword_offset[0] was_block(0)
SABRE0: UE AFAR [000000004ef7c000]
SABRE0: UE Secondary errors [(none)]
SABRE0: IOMMU Error, type[Invalid Error]
SABRE0: IOMMU TAG(1)[RAW(0000000000c6f800)error(Invalid Error)wr(0)sz(8K)vpg(df000000)]
SABRE0: IOMMU DATA(1)[RAW(000000006fe27f21)valid(1)used(1)cache(0)ppg(000000004fe42000)
Adding 737336k swap on /dev/hdc4. Priority:-1 extents:1
EXT3 FS on hdc2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ali15x3_smbus 0000:00:03.0: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
ali15x3_smbus 0000:00:03.0: ALI15X3 not detected, module not inserted.
sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:ba:11:76:3d
PHY ID: 437421, addr: 1
eth0: Found Generic MII PHY
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10,7dc] MMIO=[1ff00420000-1ff004207ff] Max Packet=[2048]
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd 0000:00:0c.3: Sun Microsystems Computer Corp. RIO USB
ohci_hcd 0000:00:0c.3: irq 9,7e4, pci mem 0x1ff02000000
ohci_hcd 0000:00:0c.3: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
usb 1-3: new low speed USB device using ohci_hcd and address 2
input: USB HID v1.10 Mouse [0430:0100] on usb-0000:00:0c.3-3
usb 1-4: new low speed USB device using ohci_hcd and address 3
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0003bafffe11763d]
input: USB HID v1.00 Keyboard [0430:0005] on usb-0000:00:0c.3-4
eth1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
PHY ID: 437421, addr: 1
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Pause is disabled
nfs warning: mount version older than kernel
ioctl32(amixer:2603): Unknown cmd fd(3) cmd(40045500){00} arg(effff804) on /dev/snd/controlC0
ioctl32(amixer:2606): Unknown cmd fd(3) cmd(40045500){00} arg(effff814) on /dev/snd/controlC0
ioctl32(amixer:2609): Unknown cmd fd(3) cmd(40045500){00} arg(effff804) on /dev/snd/controlC0
ioctl32(amixer:2612): Unknown cmd fd(3) cmd(40045500){00} arg(effff814) on /dev/snd/controlC0
ioctl32(amixer:2615): Unknown cmd fd(3) cmd(40045500){00} arg(effff814) on /dev/snd/controlC0
ioctl32(amixer:2618): Unknown cmd fd(3) cmd(40045500){00} arg(effff804) on /dev/snd/controlC0
ioctl32(amixer:2621): Unknown cmd fd(3) cmd(40045500){00} arg(effff804) on /dev/snd/controlC0
ioctl32(amixer:2624): Unknown cmd fd(3) cmd(40045500){00} arg(effff804) on /dev/snd/controlC0
ioctl32(amixer:2627): Unknown cmd fd(3) cmd(40045500){00} arg(effff804) on /dev/snd/controlC0
ioctl32(amixer:2630): Unknown cmd fd(3) cmd(40045500){00} arg(effff804) on /dev/snd/controlC0
ioctl32(amixer:2633): Unknown cmd fd(3) cmd(40045500){00} arg(effff814) on /dev/snd/controlC0
ioctl32(amixer:2636): Unknown cmd fd(3) cmd(40045500){00} arg(effff804) on /dev/snd/controlC0
ioctl32(amixer:2639): Unknown cmd fd(3) cmd(40045500){00} arg(effff804) on /dev/snd/controlC0
ioctl32(amixer:2642): Unknown cmd fd(3) cmd(40045500){00} arg(effff804) on /dev/snd/controlC0
ioctl32(amixer:2645): Unknown cmd fd(3) cmd(40045500){00} arg(effff804) on /dev/snd/controlC0
ioctl32(amixer:2648): Unknown cmd fd(3) cmd(40045500){00} arg(effff7f4) on /dev/snd/controlC0
lp: driver loaded but no devices found
atyfb: setting up CRTC
atyfb: set primary CRT to 1152x900 NN composite P
atyfb: CRTC_H_TOTAL_DISP: 8f00be
atyfb: CRTC_H_SYNC_STRT_WID: 300296
atyfb: CRTC_V_TOTAL_DISP: 38303a8
atyfb: CRTC_V_SYNC_STRT_WID: 240385
atyfb: CRTC_OFF_PITCH: 24000000
atyfb: CRTC_VLINE_CRNT_VLINE: 0
atyfb: CRTC_GEN_CNTL: b000210
atyfb: atyfb_set_par
atyfb: Set Visible Mode to 1152x900-8
atyfb: Virtual resolution 1152x7246, pixclock_in_ps 10644 (calculated 10644)
atyfb: Dot clock: 93 MHz
atyfb: Horizontal sync: 61 kHz
atyfb: Vertical refresh: 65 Hz
atyfb: x style: 93.10108 1152 1210 1338 1528 900 902 906 937
atyfb: fb style: 10644 190 1152 58 128 31 900 2 4
debug atyfb: Mach64 non-shadow register values:
debug atyfb: 0x2000: 008F00BE 00300296 038303A8 00240385
debug atyfb: 0x2010: 038B0000 24000000 08000001 0B002210
debug atyfb: 0x2020: 003A0556 01200522 00000000 00000000
debug atyfb: 0x2030: 00000000 00110202 00000000 0000C001
debug atyfb: 0x2040: 00000000 00000000 00000000 00000000
debug atyfb: 0x2050: 00000000 00000000 00000000 00000000
debug atyfb: 0x2060: 00000000 AAAAAA0F 000FF800 00000000
debug atyfb: 0x2070: 00300000 00000000 01003300 00050000
debug atyfb: 0x2080: 00000000 00000000 00000000 00000000
debug atyfb: 0x2090: 00803000 00000000 00000100 00000000
debug atyfb: 0x20A0: 7B23A040 00000101 007F8091 E5000C81
debug atyfb: 0x20B0: 10151A3B 00010000 00010000 00000000
debug atyfb: 0x20C0: 00FF0010 86010182 00000000 00000000
debug atyfb: 0x20D0: 00000180 00000008 00000000 000000C2
debug atyfb: 0x20E0: 27004752 00400014 00000000 00000000
debug atyfb: 0x20F0: 00000000 0000B84D 037FFCF8 00000000
debug atyfb: Mach64 PLL register values:
debug atyfb: 0x00: ADD541E4 8A0301CF 8E9E6501 801B0000
debug atyfb: 0x10: 06CF4000 10B6AC10 408024FD 00000002
debug atyfb: 0x20: 06AC06AC 1424FD00 00255500 00000000
debug atyfb: 0x30: 00000000 00000000 00000000 00000000
[-- Attachment #1.4: 2.6.10-fbset --]
[-- Type: text/plain, Size: 569 bytes --]
mode "1152x900-66"
# D: 93.950 MHz, H: 61.485 kHz, V: 65.619 Hz
geometry 1152 900 1152 7246 8
timings 10644 190 58 31 2 128 4
csync high
accel true
rgba 8/0,8/0,8/0,0/0
endmode
Frame buffer device information:
Name : ATY Mach64
Address : 0x3800000
Size : 8372224
Type : PACKED PIXELS
Visual : PSEUDOCOLOR
XPanStep : 8
YPanStep : 1
YWrapStep : 0
LineLength : 1152
MMIO Address: 0x37ff800
MMIO Size : 2048
Accelerator : ATI Mach64GT
[-- Attachment #1.5: 2.6.8-config --]
[-- Type: text/plain, Size: 31163 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_64BIT=y
CONFIG_MMU=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# General setup
#
CONFIG_BBC_I2C=m
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_CPU_FREQ is not set
CONFIG_SPARC64=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
CONFIG_SUN_AUXIO=y
CONFIG_SUN_IO=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_RTC=y
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_NAMES is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_UID16=y
CONFIG_BINFMT_ELF32=y
# CONFIG_BINFMT_AOUT32 is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_SOLARIS_EMUL=m
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_SUNBPP=m
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
CONFIG_PRINTER=m
CONFIG_ENVCTRL=m
CONFIG_DISPLAY7SEG=m
# CONFIG_CMDLINE_BOOL is not set
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
CONFIG_FB_PM2=y
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_BW2 is not set
# CONFIG_FB_CG3 is not set
CONFIG_FB_CG6=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
# CONFIG_FB_RADEON_I2C is not set
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GX=y
# CONFIG_FB_ATY_XL_INIT is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_SBUS=y
CONFIG_FB_FFB=y
# CONFIG_FB_TCX is not set
# CONFIG_FB_CG14 is not set
# CONFIG_FB_P9100 is not set
# CONFIG_FB_LEO is not set
# CONFIG_FB_PCI is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_MDA_CONSOLE is not set
CONFIG_PROM_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_SUN8x16=y
# CONFIG_FONT_SUN12x22 is not set
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_SUN_CLUT224=y
#
# Serial drivers
#
#
# Non-8250 serial port support
#
CONFIG_SERIAL_SUNCORE=y
CONFIG_SERIAL_SUNZILOG=y
CONFIG_SERIAL_SUNZILOG_CONSOLE=y
CONFIG_SERIAL_SUNSU=y
CONFIG_SERIAL_SUNSU_CONSOLE=y
CONFIG_SERIAL_SUNSAB=y
CONFIG_SERIAL_SUNSAB_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
#
# Misc Linux/SPARC drivers
#
CONFIG_SUN_OPENPROMIO=y
CONFIG_SUN_MOSTEK_RTC=y
CONFIG_OBP_FLASH=m
# CONFIG_SUN_BPP is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_IDEDMA_ONLYDISK=y
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=m
# CONFIG_BLK_DEV_TRIFLEX is not set
CONFIG_BLK_DEV_CY82C693=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
# CONFIG_PDC202XX_BURST is not set
CONFIG_BLK_DEV_PDC202XX_NEW=m
# CONFIG_PDC202XX_FORCE is not set
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
# CONFIG_BLK_DEV_SLC90E66 is not set
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
#
# SCSI low-level drivers
#
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA_PIO=m
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_QLOGIC_ISP=m
CONFIG_SCSI_QLOGIC_FC=m
CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLOGICPTI=m
CONFIG_SCSI_DC395x=m
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SUNESP=m
#
# Fibre Channel support
#
CONFIG_FC4=m
#
# FC4 drivers
#
CONFIG_FC4_SOC=m
CONFIG_FC4_SOCAL=m
#
# FC4 targets
#
CONFIG_SCSI_PLUTO=m
CONFIG_SCSI_FCAL=m
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
#
# Fusion MPT device support
#
CONFIG_FUSION=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_ISENSE=m
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_RAW=m
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
CONFIG_DECNET_SIOCGIFCONF=y
CONFIG_DECNET_ROUTER=y
CONFIG_DECNET_ROUTE_FWMARK=y
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
# CONFIG_ETHERTAP is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_SUNLANCE=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNBMAC=m
CONFIG_SUNQE=m
CONFIG_SUNGEM=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
# CONFIG_DE4X5 is not set
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_AMD8111_ETH is not set
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_B44=m
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
CONFIG_E100_NAPI=y
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
CONFIG_SUNDANCE_MMIO=y
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_VELOCITY=m
#
# Ethernet (1000 Mbit)
#
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
CONFIG_MYRI_SBUS=m
CONFIG_NS83820=m
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=m
# CONFIG_R8169 is not set
CONFIG_SK98LIN=m
CONFIG_TIGON3=m
#
# Ethernet (10000 Mbit)
#
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Unix98 PTY support
#
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# XFree86 DRI support
#
CONFIG_DRM=y
CONFIG_DRM_FFB=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_MOUSEDEV_PSAUX_ENABLE=y
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_LKKBD=m
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_SPARCSPKR=m
# CONFIG_INPUT_UINPUT is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS_XATTR=y
# CONFIG_DEVPTS_FS_SECURITY is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
# CONFIG_ASFS_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_POSIX is not set
CONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
CONFIG_VIDEO_SAA7134=m
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_BIT32_EMUL=m
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_CMIPCI=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
CONFIG_SND_MAESTRO3=m
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# ALSA Sparc devices
#
CONFIG_SND_SUN_AMD7930=m
CONFIG_SND_SUN_CS4231=m
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
CONFIG_USB_ATI_REMOTE=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_HPUSBSCSI=m
#
# USB Multimedia devices
#
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
#
# USB Network adaptors
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
#
# USB Host-to-Host Cables
#
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_GENESYS=y
CONFIG_USB_NET1080=y
CONFIG_USB_PL2301=y
#
# Intelligent USB Devices/Gadgets
#
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_ZAURUS=y
CONFIG_USB_CDCETHER=y
#
# USB Network Adapters
#
CONFIG_USB_AX8817X=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
CONFIG_USB_RIO500=m
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYTHERM=m
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
[-- Attachment #1.6: 2.6.8-dmesg --]
[-- Type: text/plain, Size: 6879 bytes --]
PROMLIB: Sun IEEE Boot Prom 4.0.45 2001/02/08 14:33
Linux version 2.6.8-2-sparc64 (joshk@fortissimo.triplehelix.org) (gcc version 3.3.5 (Debian 1:3.3.5-5)) #1 Tue Dec 28 12:20:13 PST 2004
ARCH: SUN4U
Ethernet address: 00:03:ba:11:76:3d
On node 0 totalpages: 97256
DMA zone: 97256 pages, LIFO batch:8
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/hdc2 ro
PID hash table entries: 4096 (order 12: 65536 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 6, 524288 bytes)
Memory: 766848k available (1992k kernel code, 600k data, 152k init) [fffff80000000000,000000004fef6000]
Calibrating delay loop... 999.42 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 8192 bytes)
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 3072k freed
NET: Registered protocol family 16
PCI: Probing for controllers.
PCI: Found SABRE, main regs at 000001fe00000000, wsync at 000001fe00001c20
SABRE: Shared PCI config space at 000001fe01000000
SABRE: DVMA at c0000000 [20000000]
PCI-IRQ: Routing bus[ 0] slot[ 8] map[0] to INO[23]
PCI-IRQ: Routing bus[ 0] slot[ c] map[0] to INO[06]
PCI-IRQ: Routing bus[ 0] slot[ c] map[0] to INO[1c]
PCI-IRQ: Routing bus[ 0] slot[ c] map[0] to INO[24]
PCI-IRQ: Routing bus[ 0] slot[ d] map[0] to INO[0c]
PCI-IRQ: Routing bus[ 0] slot[13] map[0] to INO[0f]
PCI-IRQ: Routing bus[ 1] slot[ 2] map[0] to INO[15]
PCI0(PBMA): Bus running at 33MHz
isa0: [dma -> (floppy) (parallel)] [power] [serial] [serial]
ebus0: [flashprom] [eeprom] [idprom]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
atyfb: 3D RAGE (XL) [0x4752 rev 0x27] 8M SDRAM, 29.498928 MHz XTAL, 230 MHz PLL, 100 Mhz MCLK
fb0: ATY Mach64 frame buffer device on PCI
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Activating ISA DMA hang workarounds.
Console: switching to mono PROM 80x34
Console: switching to colour frame buffer device 144x56
rtc_init: no PC rtc found
ttyS0 at MMIO 0x1fe020003f8 (irq = 0) is a 16550A
ttyS1 at MMIO 0x1fe020002e8 (irq = 0) is a 16550A
Using anticipatory io scheduler
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3072 blocks [1 disk] into ram disk... |\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\bdone.
VFS: Mounted root (cramfs filesystem) readonly.
ALI15X3: IDE controller at PCI slot 0000:00:0d.0
ALI15X3: chipset revision 195
ALI15X3: 100% native mode on irq 4,7cc
ide0: BM-DMA at 0x1fe02000a20-0x1fe02000a27, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1fe02000a28-0x1fe02000a2f, BIOS settings: hdc:pio, hdd:pio
hda: ST320011A, ATA DISK drive
hdb: LTN486S, ATAPI CD/DVD-ROM drive
ide0 at 0x1fe02000a00-0x1fe02000a07,0x1fe02000a1a on irq 4,7cc
hdc: FUJITSU MPE3170AT, ATA DISK drive
ide1 at 0x1fe02000a10-0x1fe02000a17,0x1fe02000a0a on irq 4,7cc
hda: max request size: 128KiB
hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(66)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p8
hdc: max request size: 128KiB
hdc: 33360580 sectors (17080 MB) w/2048KiB Cache, CHS=33095/16/63, UDMA(33)
/dev/ide/host0/bus1/target0/lun0: p1 p2 p3 p4
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
SABRE0: Uncorrectable Error, primary error type[DMA Write:Translation Error]
SABRE0: bytemask[00ff] dword_offset[0] was_block(0)
SABRE0: UE AFAR [000000004fa7c000]
SABRE0: UE Secondary errors [(none)]
SABRE0: IOMMU Error, type[Invalid Error]
SABRE0: IOMMU TAG(3)[RAW(0000000000c6f800)error(Invalid Error)wr(0)sz(8K)vpg(df000000)]
SABRE0: IOMMU DATA(3)[RAW(000000006fe00000)valid(1)used(1)cache(0)ppg(0000000000000000)
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 737336k swap on /dev/hdc4. Priority:-1 extents:1
EXT3 FS on hdc2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:ba:11:76:3d
PHY ID: 437421, addr: 1
eth0: Found Generic MII PHY
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10,7dc] MMIO=[1ff00420000-1ff004207ff] Max Packet=[2048]
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 80 td 96
ohci_hcd 0000:00:0c.3: OHCI Host Controller
ohci_hcd 0000:00:0c.3: irq 9,7e4, pci mem 000001ff02000000
ohci_hcd 0000:00:0c.3: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0003bafffe11763d]
usb 1-3: new low speed USB device using address 2
input: USB HID v1.10 Mouse [0430:0100] on usb-0000:00:0c.3-3
usb 1-4: new low speed USB device using address 3
input: USB HID v1.00 Keyboard [0430:0005] on usb-0000:00:0c.3-4
ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
hdb: ATAPI 48X CD-ROM drive, 120kB Cache
Uniform CD-ROM driver Revision: 3.20
PHY ID: 437421, addr: 1
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Pause is disabled
nfs warning: mount version older than kernel
lp: driver loaded but no devices found
NET: Registered protocol family 10
Disabled Privacy Extensions on device 000000000064f990(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
[-- Attachment #1.7: 2.6.8-fbset --]
[-- Type: text/plain, Size: 586 bytes --]
mode "1152x900-66"
# D: 93.950 MHz, H: 61.485 kHz, V: 65.619 Hz
geometry 1152 900 1152 7246 8
timings 10644 190 58 31 2 128 4
hsync high
csync high
accel true
rgba 8/0,8/0,8/0,0/0
endmode
Frame buffer device information:
Name : ATY Mach64
Address : 0x3800000
Size : 8372224
Type : PACKED PIXELS
Visual : PSEUDOCOLOR
XPanStep : 8
YPanStep : 1
YWrapStep : 0
LineLength : 1152
MMIO Address: 0xfffffc00
MMIO Size : 2048
Accelerator : ATI Mach64GT
[-- Attachment #2: Questa parte del messaggio è firmata --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Re: [Fwd: AtyFB in 2.6.10, still not perfect]
2005-03-15 10:26 [Fwd: AtyFB in 2.6.10, still not perfect] Antonino A. Daplas
2005-03-15 19:40 ` Luigi Gangitano
@ 2005-03-15 20:39 ` Antonino A. Daplas
2005-03-15 23:20 ` Luigi Gangitano
1 sibling, 1 reply; 9+ messages in thread
From: Antonino A. Daplas @ 2005-03-15 20:39 UTC (permalink / raw)
To: Luigi Gangitano; +Cc: Alexander Kern, Linux Fbdev development list
On Tuesday 15 March 2005 18:26, Antonino A. Daplas wrote:
> --- Luigi Gangitano <luigi@debian.org> wrote:
> 4. Can you post the dmesg, config and fbset -i of both the
> working and non-working kernel?
>
The dmesg log you sent me showed this:
working:
atyfb: 3D RAGE (XL) [0x4752 rev 0x27] 8M SDRAM, 29.498928 MHz XTAL, 230
MHz PLL, 100 Mhz MCLK
not working:
atyfb: 3D RAGE XL (Mach64 GR, PCI-33MHz) [0x4752 rev 0x27]
atyfb: 8M SDRAM (1:1), 29.498928 MHz XTAL, 230 MHz PLL, 83 Mhz MCLK, 63
MHz XCLK
The MCLK value is different. Can you try booting with
video=atyfb:mclk:100
You can also experiment with xclk:
video=atyfb:mclk:100,xclk:63
Tony
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Re: [Fwd: AtyFB in 2.6.10, still not perfect]
2005-03-15 20:39 ` Antonino A. Daplas
@ 2005-03-15 23:20 ` Luigi Gangitano
2005-03-15 23:49 ` Antonino A. Daplas
0 siblings, 1 reply; 9+ messages in thread
From: Luigi Gangitano @ 2005-03-15 23:20 UTC (permalink / raw)
To: adaplas; +Cc: linux-fbdev-devel, Alexander Kern
[-- Attachment #1: Type: text/plain, Size: 722 bytes --]
Il giorno mer, 16-03-2005 alle 04:39 +0800, Antonino A. Daplas ha
scritto:
> working:
> atyfb: 3D RAGE (XL) [0x4752 rev 0x27] 8M SDRAM, 29.498928 MHz XTAL, 230
> MHz PLL, 100 Mhz MCLK
>
> not working:
> atyfb: 3D RAGE XL (Mach64 GR, PCI-33MHz) [0x4752 rev 0x27]
> atyfb: 8M SDRAM (1:1), 29.498928 MHz XTAL, 230 MHz PLL, 83 Mhz MCLK, 63
> MHz XCLK
>
> The MCLK value is different. Can you try booting with
>
> video=atyfb:mclk:100
>
> You can also experiment with xclk:
>
> video=atyfb:mclk:100,xclk:63
No luck, with neither option.
Regards,
--
Luigi Gangitano -- <luigi@debian.org> -- <gangitano@lugroma3.org>
GPG: 1024D/924C0C26: 12F8 9C03 89D3 DB4A 9972 C24A F19B A618 924C 0C26
[-- Attachment #2: Questa parte del messaggio è firmata --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Re: [Fwd: AtyFB in 2.6.10, still not perfect]
2005-03-15 23:20 ` Luigi Gangitano
@ 2005-03-15 23:49 ` Antonino A. Daplas
2005-03-19 15:15 ` Alexander Kern
0 siblings, 1 reply; 9+ messages in thread
From: Antonino A. Daplas @ 2005-03-15 23:49 UTC (permalink / raw)
To: Luigi Gangitano, adaplas; +Cc: linux-fbdev-devel, Alexander Kern
On Wednesday 16 March 2005 07:20, Luigi Gangitano wrote:
> Il giorno mer, 16-03-2005 alle 04:39 +0800, Antonino A. Daplas ha
>
> scritto:
> > working:
> > atyfb: 3D RAGE (XL) [0x4752 rev 0x27] 8M SDRAM, 29.498928 MHz XTAL, 230
> > MHz PLL, 100 Mhz MCLK
> >
> > not working:
> > atyfb: 3D RAGE XL (Mach64 GR, PCI-33MHz) [0x4752 rev 0x27]
> > atyfb: 8M SDRAM (1:1), 29.498928 MHz XTAL, 230 MHz PLL, 83 Mhz MCLK, 63
> > MHz XCLK
> >
> > The MCLK value is different. Can you try booting with
> >
> > video=atyfb:mclk:100
> >
> > You can also experiment with xclk:
> >
> > video=atyfb:mclk:100,xclk:63
>
> No luck, with neither option.
Hmmn, let's just wait for the other developers to respond.
Tony
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Re: [Fwd: AtyFB in 2.6.10, still not perfect]
2005-03-15 23:49 ` Antonino A. Daplas
@ 2005-03-19 15:15 ` Alexander Kern
2005-03-22 20:06 ` Luigi Gangitano
0 siblings, 1 reply; 9+ messages in thread
From: Alexander Kern @ 2005-03-19 15:15 UTC (permalink / raw)
To: linux-fbdev-devel; +Cc: Antonino A. Daplas, Luigi Gangitano
Am Mittwoch, 16. März 2005 00:49 schrieb Antonino A. Daplas:
> On Wednesday 16 March 2005 07:20, Luigi Gangitano wrote:
> > Il giorno mer, 16-03-2005 alle 04:39 +0800, Antonino A. Daplas ha
> >
> > scritto:
> > > working:
> > > atyfb: 3D RAGE (XL) [0x4752 rev 0x27] 8M SDRAM, 29.498928 MHz XTAL, 230
> > > MHz PLL, 100 Mhz MCLK
> > >
> > > not working:
> > > atyfb: 3D RAGE XL (Mach64 GR, PCI-33MHz) [0x4752 rev 0x27]
> > > atyfb: 8M SDRAM (1:1), 29.498928 MHz XTAL, 230 MHz PLL, 83 Mhz MCLK, 63
> > > MHz XCLK
> > >
> > > The MCLK value is different. Can you try booting with
> > >
> > > video=atyfb:mclk:100
> > >
> > > You can also experiment with xclk:
> > >
> > > video=atyfb:mclk:100,xclk:63
> >
> > No luck, with neither option.
>
> Hmmn, let's just wait for the other developers to respond.
>
> Tony
Copyed from oldest mail...
> (as known) with 2.6.10. Latest 2.6.10 source in
> debian adds the fix that
> was integrated in 2.6.11, from
>
>
> http://lists.debian.org/debian-sparc/2005/02/msg00063.html
It's mean you run 2.6.10 + "always hsync on SPARC" patch ?
And if you try any fixes from Tony, you see mclk 100 xclk 100 in your dmesg,
bur screen is steel garbage?
Regards Alex
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id\x14396&op=click
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Re: [Fwd: AtyFB in 2.6.10, still not perfect]
2005-03-19 15:15 ` Alexander Kern
@ 2005-03-22 20:06 ` Luigi Gangitano
2005-03-23 21:35 ` Alexander Kern
0 siblings, 1 reply; 9+ messages in thread
From: Luigi Gangitano @ 2005-03-22 20:06 UTC (permalink / raw)
To: linux-fbdev-devel; +Cc: Antonino A. Daplas, Alexander Kern
[-- Attachment #1: Type: text/plain, Size: 814 bytes --]
Il giorno sab, 19-03-2005 alle 16:15 +0100, Alexander Kern ha scritto:
> Copyed from oldest mail...
>
> > (as known) with 2.6.10. Latest 2.6.10 source in
> > debian adds the fix that
> > was integrated in 2.6.11, from
> >
> >
> > http://lists.debian.org/debian-sparc/2005/02/msg00063.html
>
> It's mean you run 2.6.10 + "always hsync on SPARC" patch ?
Right. Same behaviour with 2.6.11, however.
> And if you try any fixes from Tony, you see mclk 100 xclk 100 in your dmesg,
> bur screen is steel garbage?
Yes. dmesg reports the setting passed on cmdline and screen is still
garbled. Setting xclk to 100 makes things worse.
Regards,
--
Luigi Gangitano -- <luigi@debian.org> -- <gangitano@lugroma3.org>
GPG: 1024D/924C0C26: 12F8 9C03 89D3 DB4A 9972 C24A F19B A618 924C 0C26
[-- Attachment #2: Questa parte del messaggio è firmata --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Re: [Fwd: AtyFB in 2.6.10, still not perfect]
2005-03-22 20:06 ` Luigi Gangitano
@ 2005-03-23 21:35 ` Alexander Kern
2005-03-24 16:06 ` Luigi Gangitano
0 siblings, 1 reply; 9+ messages in thread
From: Alexander Kern @ 2005-03-23 21:35 UTC (permalink / raw)
To: linux-fbdev-devel; +Cc: Luigi Gangitano, Antonino A. Daplas
[-- Attachment #1: Type: text/plain, Size: 851 bytes --]
Am Dienstag, 22. März 2005 21:06 schrieb Luigi Gangitano:
> Il giorno sab, 19-03-2005 alle 16:15 +0100, Alexander Kern ha scritto:
> > Copyed from oldest mail...
> >
> > > (as known) with 2.6.10. Latest 2.6.10 source in
> > > debian adds the fix that
> > > was integrated in 2.6.11, from
> > >
> > >
> > > http://lists.debian.org/debian-sparc/2005/02/msg00063.html
> >
> > It's mean you run 2.6.10 + "always hsync on SPARC" patch ?
>
> Right. Same behaviour with 2.6.11, however.
>
> > And if you try any fixes from Tony, you see mclk 100 xclk 100 in your
> > dmesg, bur screen is steel garbage?
>
> Yes. dmesg reports the setting passed on cmdline and screen is still
> garbled. Setting xclk to 100 makes things worse.
>
> Regards,
Ok, try this patch...
or in combination with setting mclk and xclk to 100
Regards
Alex
[-- Attachment #2: atyfb_xl_gr_try.diff --]
[-- Type: text/x-diff, Size: 770 bytes --]
--- atyfb_base.c.orig 2004-12-24 22:35:23.000000000 +0100
+++ atyfb_base.c 2005-03-23 22:32:58.553823808 +0100
@@ -403,7 +403,7 @@
{ PCI_CHIP_MACH64GM, "3D RAGE XL (Mach64 GM, AGP)", 230, 83, 63, ATI_CHIP_264XL },
{ PCI_CHIP_MACH64GN, "3D RAGE XL (Mach64 GN, AGP)", 230, 83, 63, ATI_CHIP_264XL },
{ PCI_CHIP_MACH64GO, "3D RAGE XL (Mach64 GO, PCI-66/BGA)", 230, 83, 63, ATI_CHIP_264XL },
- { PCI_CHIP_MACH64GR, "3D RAGE XL (Mach64 GR, PCI-33MHz)", 230, 83, 63, ATI_CHIP_264XL },
+ { PCI_CHIP_MACH64GR, "3D RAGE XL (Mach64 GR, PCI-33MHz)", 230, 83, 63, ATI_CHIP_264XL | M64F_SDRAM_MAGIC_PLL },
{ PCI_CHIP_MACH64GL, "3D RAGE XL (Mach64 GL, PCI)", 230, 83, 63, ATI_CHIP_264XL },
{ PCI_CHIP_MACH64GS, "3D RAGE XL (Mach64 GS, PCI)", 230, 83, 63, ATI_CHIP_264XL },
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Re: [Fwd: AtyFB in 2.6.10, still not perfect]
2005-03-23 21:35 ` Alexander Kern
@ 2005-03-24 16:06 ` Luigi Gangitano
0 siblings, 0 replies; 9+ messages in thread
From: Luigi Gangitano @ 2005-03-24 16:06 UTC (permalink / raw)
To: Alexander Kern; +Cc: linux-fbdev-devel, Antonino A. Daplas
[-- Attachment #1.1: Type: text/plain, Size: 1244 bytes --]
Il giorno mer, 23-03-2005 alle 22:35 +0100, Alexander Kern ha scritto:
> > > And if you try any fixes from Tony, you see mclk 100 xclk 100 in your
> > > dmesg, bur screen is steel garbage?
> >
> > Yes. dmesg reports the setting passed on cmdline and screen is still
> > garbled. Setting xclk to 100 makes things worse.
> >
> > Regards,
> Ok, try this patch...
>
> or in combination with setting mclk and xclk to 100
Great. This patch mostly solved the problem. Now I have all the columns
right and the screen shows no corruption.
I still get some minor corruption during screen redrawing (each time a
line is added), small white dots vertically aligned. When redrawing is
finished the screen is ok.
Using X this corruption is more frequent and constantly visible.
Setting mclk and xclk to 100 doesn't make any visible difference.
Attached you can find the last dmesg and fbset -i output. Still the
difference with the original 2.6.8 output is 'hsync high' missing. Don't
know if this makes sense to you.
Thank you very much. You help has been great!
Regards,
--
Luigi Gangitano -- <luigi@debian.org> -- <gangitano@lugroma3.org>
GPG: 1024D/924C0C26: 12F8 9C03 89D3 DB4A 9972 C24A F19B A618 924C 0C26
[-- Attachment #1.2: 2.6.10-patched-dmesg --]
[-- Type: text/plain, Size: 10971 bytes --]
PROMLIB: Sun IEEE Boot Prom 4.0.45 2001/02/08 14:33
Linux version 2.6.10 (root@gladio) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 Thu Mar 24 16:10:09 CET 2005
ARCH: SUN4U
Ethernet address: 00:03:ba:11:76:3d
On node 0 totalpages: 97503
DMA zone: 97503 pages, LIFO batch:8
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/hdc2 ro video=atyfb:mclk:100,xclk:100
PID hash table entries: 4096 (order: 12, 131072 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 6, 524288 bytes)
Memory: 768960k available (2608k kernel code, 952k data, 144k init) [fffff80000000000,000000004fecc000]
Calibrating delay loop... 997.37 BogoMIPS (lpj=498688)
Mount-cache hash table entries: 512 (order: 0, 8192 bytes)
NET: Registered protocol family 16
PCI: Probing for controllers.
PCI: Found SABRE, main regs at 000001fe00000000, wsync at 000001fe00001c20
SABRE: Shared PCI config space at 000001fe01000000
SABRE: DVMA at c0000000 [20000000]
PCI-IRQ: Routing bus[ 0] slot[ 8] map[0] to INO[23]
PCI-IRQ: Routing bus[ 0] slot[ c] map[0] to INO[06]
PCI-IRQ: Routing bus[ 0] slot[ c] map[0] to INO[1c]
PCI-IRQ: Routing bus[ 0] slot[ c] map[0] to INO[24]
PCI-IRQ: Routing bus[ 0] slot[ d] map[0] to INO[0c]
PCI-IRQ: Routing bus[ 0] slot[13] map[0] to INO[0f]
PCI-IRQ: Routing bus[ 1] slot[ 0] map[0] to INO[19]
PCI-IRQ: Routing bus[ 1] slot[ 2] map[0] to INO[15]
PCI-IRQ: Routing bus[ 2] slot[ 0] map[1] to INO[1b]
PCI-IRQ: Routing bus[ 2] slot[ 1] map[1] to INO[0b]
PCI-IRQ: Routing bus[ 2] slot[ 2] map[1] to INO[1a]
PCI-IRQ: Routing bus[ 2] slot[ 3] map[1] to INO[0a]
PCI0(PBMA): Bus running at 33MHz
isa0: [dma -> (floppy) (parallel)] [power] [serial] [serial]
ebus0: [flashprom] [eeprom] [idprom]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
Initializing Cryptographic API
Activating ISA DMA hang workarounds.
atyfb: 3D RAGE XL (Mach64 GR, PCI-33MHz) [0x4752 rev 0x27]
atyfb: 8M SDRAM (1:1), 29.498928 MHz XTAL, 230 MHz PLL, 100 Mhz MCLK, 100 MHz XCLK
atyfb: setting up CRTC
atyfb: set primary CRT to 1152x900 NN composite P
atyfb: CRTC_H_TOTAL_DISP: 8f00be
atyfb: CRTC_H_SYNC_STRT_WID: 300296
atyfb: CRTC_V_TOTAL_DISP: 38303a8
atyfb: CRTC_V_SYNC_STRT_WID: 240385
atyfb: CRTC_OFF_PITCH: 24000000
atyfb: CRTC_VLINE_CRNT_VLINE: 0
atyfb: CRTC_GEN_CNTL: b000210
atyfb: atyfb_set_par
atyfb: Set Visible Mode to 1152x900-8
atyfb: Virtual resolution 1152x7246, pixclock_in_ps 10644 (calculated 10644)
atyfb: Dot clock: 93 MHz
atyfb: Horizontal sync: 61 kHz
atyfb: Vertical refresh: 65 Hz
atyfb: x style: 93.10108 1152 1210 1338 1528 900 902 906 937
atyfb: fb style: 10644 190 1152 58 128 31 900 2 4
debug atyfb: Mach64 non-shadow register values:
debug atyfb: 0x2000: 008F00BE 00300296 038303A8 00240385
debug atyfb: 0x2010: 03880000 24000000 08000001 0B002210
debug atyfb: 0x2020: 004A0441 00900416 00000000 00000000
debug atyfb: 0x2030: 00000000 00110202 00000000 0000C001
debug atyfb: 0x2040: 00000000 00000000 00000000 00000000
debug atyfb: 0x2050: 00000000 00000000 00000000 00000000
debug atyfb: 0x2060: 36A13131 24FBA121 00000000 00000000
debug atyfb: 0x2070: 00000000 00000000 01003300 00050000
debug atyfb: 0x2080: 00000000 00000000 00000000 00000000
debug atyfb: 0x2090: 00803000 00000000 00000100 00000000
debug atyfb: 0x20A0: 7B23A040 00000101 007F8091 E5000C81
debug atyfb: 0x20B0: 10751A3B 00010000 00010000 00000000
debug atyfb: 0x20C0: 00FF0000 86010182 00000000 00000000
debug atyfb: 0x20D0: 00000100 00000008 00000000 000000C2
debug atyfb: 0x20E0: 27004752 00400014 00000000 00000000
debug atyfb: 0x20F0: 00000000 0000B84D 037FFCF8 00000000
debug atyfb: Mach64 PLL register values:
debug atyfb: 0x00: ADD54114 DC0301CF 8E9E6501 801B0000
debug atyfb: 0x10: 06CF4000 10F6AC03 408024FD 00000002
debug atyfb: 0x20: 06AC06AC 1424FD00 00255500 00000000
debug atyfb: 0x30: 00000000 00000000 00000000 00000000
Console: switching to colour frame buffer device 144x56
atyfb: fb0: ATY Mach64 frame buffer device on PCI
rtc_init: no PC rtc found
ttyS0 at MMIO 0x1fe020003f8 (irq = 8106976) is a 16550A
ttyS1 at MMIO 0x1fe020002e8 (irq = 8106976) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
elevator: using anticipatory as default io scheduler
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 0000:00:0d.0
ALI15X3: chipset revision 195
ALI15X3: 100% native mode on irq 4,7cc
ide0: BM-DMA at 0x1fe02000a20-0x1fe02000a27, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1fe02000a28-0x1fe02000a2f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: ST320011A, ATA DISK drive
hdb: LTN486S, ATAPI CD/DVD-ROM drive
ide0 at 0x1fe02000a00-0x1fe02000a07,0x1fe02000a1a on irq 4,7cc
Probing IDE interface ide1...
hdc: FUJITSU MPE3170AT, ATA DISK drive
ide1 at 0x1fe02000a10-0x1fe02000a17,0x1fe02000a0a on irq 4,7cc
hda: max request size: 128KiB
hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(66)
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda8
hdc: max request size: 128KiB
hdc: 33360580 sectors (17080 MB) w/2048KiB Cache, CHS=33095/16/63, UDMA(33)
hdc: cache flushes not supported
hdc: hdc1 hdc2 hdc3 hdc4
hdb: ATAPI 48X CD-ROM drive, 120kB Cache
Uniform CD-ROM driver Revision: 3.20
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
SABRE0: Uncorrectable Error, primary error type[DMA Write:Translation Error]
SABRE0: bytemask[00ff] dword_offset[0] was_block(0)
SABRE0: UE AFAR [000000004f4fc000]
SABRE0: UE Secondary errors [(none)]
SABRE0: IOMMU Error, type[Invalid Error]
SABRE0: IOMMU TAG(1)[RAW(0000000000c6f800)error(Invalid Error)wr(0)sz(8K)vpg(df000000)]
SABRE0: IOMMU DATA(1)[RAW(000000006fe27f3c)valid(1)used(1)cache(0)ppg(000000004fe78000)
EXT3-fs: hdc2: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 410825
ext3_orphan_cleanup: deleting unreferenced inode 410824
ext3_orphan_cleanup: deleting unreferenced inode 410823
ext3_orphan_cleanup: deleting unreferenced inode 410822
EXT3-fs: hdc2: 4 orphan inodes deleted
EXT3-fs: recovery complete.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Adding 737336k swap on /dev/hdc4. Priority:-1 extents:1
EXT3 FS on hdc2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ali15x3_smbus 0000:00:03.0: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
ali15x3_smbus 0000:00:03.0: ALI15X3 not detected, module not inserted.
sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:ba:11:76:3d
PHY ID: 437421, addr: 1
eth0: Found Generic MII PHY
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10,7dc] MMIO=[1ff00420000-1ff004207ff] Max Packet=[2048]
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd 0000:00:0c.3: Sun Microsystems Computer Corp. RIO USB
ohci_hcd 0000:00:0c.3: irq 9,7e4, pci mem 0x1ff02000000
ohci_hcd 0000:00:0c.3: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
usb 1-3: new low speed USB device using ohci_hcd and address 2
input: USB HID v1.10 Mouse [0430:0100] on usb-0000:00:0c.3-3
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0003bafffe11763d]
usb 1-4: new low speed USB device using ohci_hcd and address 3
input: USB HID v1.00 Keyboard [0430:0005] on usb-0000:00:0c.3-4
eth1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
r8169 Gigabit Ethernet driver 1.2 loaded
r8169: NAPI enabled
eth2: Identified chip type is 'RTL8169s/8110s'.
eth2: RTL8169 at 0x1ff04000000, 00:c0:49:f2:8e:10, IRQ 8106400
sunhme.c:v2.02 24/Aug/2003 David S. Miller (davem@redhat.com)
eth3: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 00:03:ba:11:76:3d
eth4: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 00:03:ba:11:76:3d
eth5: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 00:03:ba:11:76:3d
eth6: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 00:03:ba:11:76:3d
PHY ID: 437421, addr: 1
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Pause is disabled
nfs warning: mount version older than kernel
ioctl32(amixer:2852): Unknown cmd fd(3) cmd(40045500){00} arg(effff7f4) on /dev/snd/controlC0
ioctl32(amixer:2867): Unknown cmd fd(3) cmd(40045500){00} arg(effff7f4) on /dev/snd/controlC0
ioctl32(amixer:2870): Unknown cmd fd(3) cmd(40045500){00} arg(effff7f4) on /dev/snd/controlC0
ioctl32(amixer:2873): Unknown cmd fd(3) cmd(40045500){00} arg(effff7f4) on /dev/snd/controlC0
ioctl32(amixer:2876): Unknown cmd fd(3) cmd(40045500){00} arg(effff7f4) on /dev/snd/controlC0
ioctl32(amixer:2879): Unknown cmd fd(3) cmd(40045500){00} arg(effff7f4) on /dev/snd/controlC0
ioctl32(amixer:2882): Unknown cmd fd(3) cmd(40045500){00} arg(effff7f4) on /dev/snd/controlC0
ioctl32(amixer:2885): Unknown cmd fd(3) cmd(40045500){00} arg(effff7f4) on /dev/snd/controlC0
ioctl32(amixer:2888): Unknown cmd fd(3) cmd(40045500){00} arg(effff7f4) on /dev/snd/controlC0
ioctl32(amixer:2891): Unknown cmd fd(3) cmd(40045500){00} arg(effff7e4) on /dev/snd/controlC0
ioctl32(amixer:2894): Unknown cmd fd(3) cmd(40045500){00} arg(effff7f4) on /dev/snd/controlC0
ioctl32(amixer:2897): Unknown cmd fd(3) cmd(40045500){00} arg(effff7f4) on /dev/snd/controlC0
ioctl32(amixer:2900): Unknown cmd fd(3) cmd(40045500){00} arg(effff7f4) on /dev/snd/controlC0
ioctl32(amixer:2903): Unknown cmd fd(3) cmd(40045500){00} arg(effff7f4) on /dev/snd/controlC0
ioctl32(amixer:2906): Unknown cmd fd(3) cmd(40045500){00} arg(effff7f4) on /dev/snd/controlC0
ioctl32(amixer:2909): Unknown cmd fd(3) cmd(40045500){00} arg(effff7e4) on /dev/snd/controlC0
lp: driver loaded but no devices found
[-- Attachment #1.3: 2.6.10-patched-fbset --]
[-- Type: text/plain, Size: 569 bytes --]
mode "1152x900-66"
# D: 93.950 MHz, H: 61.485 kHz, V: 65.619 Hz
geometry 1152 900 1152 7246 8
timings 10644 190 58 31 2 128 4
csync high
accel true
rgba 8/0,8/0,8/0,0/0
endmode
Frame buffer device information:
Name : ATY Mach64
Address : 0x3800000
Size : 8372224
Type : PACKED PIXELS
Visual : PSEUDOCOLOR
XPanStep : 8
YPanStep : 1
YWrapStep : 0
LineLength : 1152
MMIO Address: 0x37ff800
MMIO Size : 2048
Accelerator : ATI Mach64GT
[-- Attachment #2: Questa parte del messaggio è firmata --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2005-03-24 16:07 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-03-15 10:26 [Fwd: AtyFB in 2.6.10, still not perfect] Antonino A. Daplas
2005-03-15 19:40 ` Luigi Gangitano
2005-03-15 20:39 ` Antonino A. Daplas
2005-03-15 23:20 ` Luigi Gangitano
2005-03-15 23:49 ` Antonino A. Daplas
2005-03-19 15:15 ` Alexander Kern
2005-03-22 20:06 ` Luigi Gangitano
2005-03-23 21:35 ` Alexander Kern
2005-03-24 16:06 ` Luigi Gangitano
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).