Linux Framebuffer Layer development
 help / color / mirror / Atom feed
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Jean Delvare <khali@linux-fr.org>
Cc: linux-fbdev-devel@lists.sourceforge.net
Subject: Re: [PATCH 2/3] radeonfb: Fix debug option
Date: Wed, 13 Feb 2008 07:57:15 +1100	[thread overview]
Message-ID: <1202849835.7410.13.camel@pasglop> (raw)
In-Reply-To: <20080212102347.6dd7f673@hyperion.delvare>


On Tue, 2008-02-12 at 10:23 +0100, Jean Delvare wrote:
> Fix CONFIG_FB_RADEON_DEBUG. DEBUG must be defined before including any
> kernel header, otherwise dev_dbg() resolves to a no-op. Also, when
> debugging is disabled, don't set DEBUG at all instead of setting it to
> 0, to comply with what the kernel headers expect.
> 
> Signed-off-by: Jean Delvare <khali@linux-fr.org>

Ack.

> ---
> This patch was already sent on:
>  * 2007-11-17
> 
>  drivers/video/aty/radeon_base.c    |    3 ++-
>  drivers/video/aty/radeon_i2c.c     |    3 ++-
>  drivers/video/aty/radeon_monitor.c |    2 +-
>  drivers/video/aty/radeonfb.h       |   12 +++++-------
>  4 files changed, 10 insertions(+), 10 deletions(-)
> 
> --- linux-2.6.24-rc3.orig/drivers/video/aty/radeonfb.h	2007-10-24 09:59:48.000000000 +0200
> +++ linux-2.6.24-rc3/drivers/video/aty/radeonfb.h	2007-11-17 14:25:49.000000000 +0100
> @@ -1,6 +1,10 @@
>  #ifndef __RADEONFB_H__
>  #define __RADEONFB_H__
>  
> +#ifdef CONFIG_FB_RADEON_DEBUG
> +#define DEBUG		1
> +#endif
> +
>  #include <linux/module.h>
>  #include <linux/kernel.h>
>  #include <linux/sched.h>
> @@ -367,13 +371,7 @@ struct radeonfb_info {
>  /*
>   * Debugging stuffs
>   */
> -#ifdef CONFIG_FB_RADEON_DEBUG
> -#define DEBUG		1
> -#else
> -#define DEBUG		0
> -#endif
> -
> -#if DEBUG
> +#ifdef DEBUG
>  #define RTRACE		printk
>  #else
>  #define RTRACE		if(0) printk
> --- linux-2.6.24-rc3.orig/drivers/video/aty/radeon_base.c	2007-10-24 09:59:48.000000000 +0200
> +++ linux-2.6.24-rc3/drivers/video/aty/radeon_base.c	2007-11-17 14:35:06.000000000 +0100
> @@ -52,6 +52,8 @@
>  
>  #define RADEON_VERSION	"0.2.0"
>  
> +#include "radeonfb.h"
> +
>  #include <linux/module.h>
>  #include <linux/moduleparam.h>
>  #include <linux/kernel.h>
> @@ -91,7 +93,6 @@
>  
>  #include "../edid.h" // MOVE THAT TO include/video
>  #include "ati_ids.h"
> -#include "radeonfb.h"		    
>  
>  #define MAX_MAPPED_VRAM	(2048*2048*4)
>  #define MIN_MAPPED_VRAM	(1024*768*1)
> --- linux-2.6.24-rc3.orig/drivers/video/aty/radeon_i2c.c	2007-11-17 10:54:30.000000000 +0100
> +++ linux-2.6.24-rc3/drivers/video/aty/radeon_i2c.c	2007-11-17 14:34:47.000000000 +0100
> @@ -1,3 +1,5 @@
> +#include "radeonfb.h"
> +
>  #include <linux/module.h>
>  #include <linux/kernel.h>
>  #include <linux/delay.h>
> @@ -11,7 +13,6 @@
>  #include <asm/io.h>
>  
>  #include <video/radeon.h>
> -#include "radeonfb.h"
>  #include "../edid.h"
>  
>  static void radeon_gpio_setscl(void* data, int state)
> --- linux-2.6.24-rc3.orig/drivers/video/aty/radeon_monitor.c	2007-10-10 09:57:39.000000000 +0200
> +++ linux-2.6.24-rc3/drivers/video/aty/radeon_monitor.c	2007-11-17 15:17:02.000000000 +0100
> @@ -481,7 +481,7 @@ void __devinit radeon_probe_screens(stru
>  		
>  		RTRACE("Starting monitor auto detection...\n");
>  
> -#if DEBUG && defined(CONFIG_FB_RADEON_I2C)
> +#if defined(DEBUG) && defined(CONFIG_FB_RADEON_I2C)
>  		{
>  			u8 *EDIDs[4] = { NULL, NULL, NULL, NULL };
>  			int mon_types[4] = {MT_NONE, MT_NONE, MT_NONE, MT_NONE};
> 
> 


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

      reply	other threads:[~2008-02-12 20:57 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-02-12  9:23 [PATCH 2/3] radeonfb: Fix debug option Jean Delvare
2008-02-12 20:57 ` Benjamin Herrenschmidt [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1202849835.7410.13.camel@pasglop \
    --to=benh@kernel.crashing.org \
    --cc=khali@linux-fr.org \
    --cc=linux-fbdev-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox