From: Jaya Kumar <jayakumar.lkml@gmail.com>
To: ymiao3@marvell.com
Cc: Jaya Kumar <jayakumar.lkml@gmail.com>,
linux-fbdev-devel@lists.sourceforge.net,
linux-arm-kernel@lists.arm.linux.org.uk
Subject: [RFC 2.6.26-rc3 02/10] pxafb: cleanup and fix order of failure handling
Date: Thu, 12 Jun 2008 12:59:13 -0400 [thread overview]
Message-ID: <1213289961-1562-3-git-send-email-jayakumar.lkml@gmail.com> (raw)
In-Reply-To: <1213289961-1562-1-git-send-email-jayakumar.lkml@gmail.com>
This issue was found by Krzysztof Helt and Eric Miao.
pxafb had issues in the order with which it cleaned up if errors occurred
during a probe. This patch reorders the failure handling sequence and also
frees the cmap and clk.
Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
---
drivers/video/pxafb.c | 34 ++++++++++++++++++++++++----------
1 files changed, 24 insertions(+), 10 deletions(-)
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index dd013f3..037881a 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1683,14 +1683,14 @@ static int __init pxafb_probe(struct platform_device *dev)
if (r == NULL) {
dev_err(&dev->dev, "no I/O memory resource defined\n");
ret = -ENODEV;
- goto failed;
+ goto failed_fbi;
}
r = request_mem_region(r->start, r->end - r->start + 1, dev->name);
if (r == NULL) {
dev_err(&dev->dev, "failed to request I/O memory\n");
ret = -EBUSY;
- goto failed;
+ goto failed_fbi;
}
fbi->mmio_base = ioremap(r->start, r->end - r->start + 1);
@@ -1733,8 +1733,17 @@ static int __init pxafb_probe(struct platform_device *dev)
* This makes sure that our colour bitfield
* descriptors are correctly initialised.
*/
- pxafb_check_var(&fbi->fb.var, &fbi->fb);
- pxafb_set_par(&fbi->fb);
+ ret = pxafb_check_var(&fbi->fb.var, &fbi->fb);
+ if (ret) {
+ dev_err(&dev->dev, "failed to get suitable mode\n");
+ goto failed_free_irq;
+ }
+
+ ret = pxafb_set_par(&fbi->fb);
+ if (ret) {
+ dev_err(&dev->dev, "Failed to set parameters\n");
+ goto failed_free_irq;
+ }
platform_set_drvdata(dev, fbi);
@@ -1742,7 +1751,7 @@ static int __init pxafb_probe(struct platform_device *dev)
if (ret < 0) {
dev_err(&dev->dev,
"Failed to register framebuffer device: %d\n", ret);
- goto failed_free_irq;
+ goto failed_free_cmap;
}
#ifdef CONFIG_CPU_FREQ
@@ -1761,18 +1770,23 @@ static int __init pxafb_probe(struct platform_device *dev)
return 0;
+failed_free_cmap:
+ if (fbi->fb.cmap.len)
+ fb_dealloc_cmap(&fbi->fb.cmap);
failed_free_irq:
free_irq(irq, fbi);
-failed_free_res:
- release_mem_region(r->start, r->end - r->start + 1);
-failed_free_io:
- iounmap(fbi->mmio_base);
failed_free_mem:
dma_free_writecombine(&dev->dev, fbi->map_size,
fbi->map_cpu, fbi->map_dma);
-failed:
+failed_free_io:
+ iounmap(fbi->mmio_base);
+failed_free_res:
+ release_mem_region(r->start, r->end - r->start + 1);
+failed_fbi:
+ clk_put(fbi->clk);
platform_set_drvdata(dev, NULL);
kfree(fbi);
+failed:
return ret;
}
--
1.5.3.6
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
next prev parent reply other threads:[~2008-06-12 17:56 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-12 16:59 [RFC 2.6.26-rc3 0/10] am200epd, pxafb, metronomefb changes v4 Jaya Kumar
2008-06-12 16:59 ` [RFC 2.6.26-rc3 01/10] pxafb: fix ifdef for command line option handling Jaya Kumar
[not found] ` <20080612203541.0baa5586.krzysztof.h1@poczta.fm>
2008-06-13 1:22 ` Eric Miao
2008-06-13 7:37 ` Russell King - ARM Linux
2008-06-12 16:59 ` Jaya Kumar [this message]
2008-06-12 18:36 ` [RFC 2.6.26-rc3 02/10] pxafb: cleanup and fix order of failure handling Krzysztof Helt
2008-06-13 1:23 ` Eric Miao
2008-06-13 7:37 ` Russell King - ARM Linux
2008-06-12 16:59 ` [RFC 2.6.26-rc3 03/10] pxafb: fix __devinit/exit annotations Jaya Kumar
2008-06-12 18:36 ` [Linux-fbdev-devel] " Krzysztof Helt
2008-06-13 1:24 ` Eric Miao
2008-06-13 7:38 ` Russell King - ARM Linux
2008-06-12 16:59 ` [RFC 2.6.26-rc3 04/10] pxafb: add exit and remove handlers Jaya Kumar
2008-06-12 18:37 ` [Linux-fbdev-devel] " Krzysztof Helt
2008-06-13 1:24 ` Eric Miao
2008-06-13 7:39 ` Russell King - ARM Linux
2008-06-12 16:59 ` [RFC 2.6.26-rc3 05/10] pxafb: add shared framebuffer interface Jaya Kumar
2008-06-15 6:26 ` [Linux-fbdev-devel] " Krzysztof Helt
2008-06-15 6:49 ` Jaya Kumar
2008-06-12 16:59 ` [RFC 2.6.26-rc3 06/10] gumstix: conversion to MFP support and add bluetooth support Jaya Kumar
2008-06-13 2:01 ` Eric Miao
2008-06-15 5:51 ` Jaya Kumar
2008-06-16 2:21 ` Eric Miao
2008-07-04 5:01 ` Jaya Kumar
2008-07-08 0:52 ` Jaya Kumar
2008-06-13 7:42 ` Russell King - ARM Linux
2008-06-15 5:54 ` Jaya Kumar
2008-07-31 9:04 ` Andrew Morton
2008-06-12 16:59 ` [RFC 2.6.26-rc3 07/10] am200epd: move am200epd to mach-pxa Jaya Kumar
2008-06-13 2:12 ` Eric Miao
2008-06-15 6:23 ` Jaya Kumar
2008-06-16 2:29 ` Eric Miao
2008-06-12 16:59 ` [RFC 2.6.26-rc3 08/10] am200epd: convert to shared fb and use gpio api Jaya Kumar
2008-06-13 2:20 ` Eric Miao
2008-06-15 6:42 ` Jaya Kumar
2008-06-16 2:35 ` Eric Miao
2008-07-08 12:43 ` Jaya Kumar
2008-06-12 16:59 ` [RFC 2.6.26-rc3 09/10] metronomefb: convert printk to dev_dbg/err messages Jaya Kumar
2008-06-13 2:22 ` Eric Miao
2008-06-12 16:59 ` [RFC 2.6.26-rc3 10/10] metronomefb: changes to use separate framebuffer Jaya Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1213289961-1562-3-git-send-email-jayakumar.lkml@gmail.com \
--to=jayakumar.lkml@gmail.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-fbdev-devel@lists.sourceforge.net \
--cc=ymiao3@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).