linux-fbdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jaya Kumar <jayakumar.lkml@gmail.com>
To: ymiao3@marvell.com
Cc: Jaya Kumar <jayakumar.lkml@gmail.com>,
	linux-fbdev-devel@lists.sourceforge.net,
	linux-arm-kernel@lists.arm.linux.org.uk
Subject: [RFC 2.6.26-rc9 4/5] metronomefb: convert printk to dev_dbg/err messages
Date: Sun, 20 Jul 2008 02:10:32 -0400	[thread overview]
Message-ID: <1216534233-26674-5-git-send-email-jayakumar.lkml@gmail.com> (raw)
In-Reply-To: <1216534233-26674-1-git-send-email-jayakumar.lkml@gmail.com>

This patch converts the printk messages in metronomefb to dev_dbg/err type
messages.

Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
---
 drivers/video/metronomefb.c |   49 +++++++++++++++++++-----------------------
 1 files changed, 22 insertions(+), 27 deletions(-)

diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c
index cc4c038..8ccd113 100644
--- a/drivers/video/metronomefb.c
+++ b/drivers/video/metronomefb.c
@@ -18,6 +18,8 @@
  * is provided as am200epd.c
  *
  */
+#define DEBUG 1
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -40,15 +42,6 @@
 
 #include <asm/unaligned.h>
 
-
-#define DEBUG 1
-#ifdef DEBUG
-#define DPRINTK(f, a...) printk(KERN_DEBUG "%s: " f, __func__ , ## a)
-#else
-#define DPRINTK(f, a...)
-#endif
-
-
 /* Display specific information */
 #define DPY_W 832
 #define DPY_H 622
@@ -135,8 +128,8 @@ static u16 calc_img_cksum(u16 *start, int length)
 
 /* here we decode the incoming waveform file and populate metromem */
 #define EXP_WFORM_SIZE 47001
-static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
-				u8 *frame_count)
+static int __devinit load_waveform(u8 *mem, size_t size, int m, int t,
+				struct metronomefb_par *par)
 {
 	int tta;
 	int wmta;
@@ -148,9 +141,11 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
 	int wfm_idx, owfm_idx;
 	int mem_idx = 0;
 	struct waveform_hdr *wfm_hdr;
+	u8 *metromem = par->metromem_wfm;
+	struct device *dev = par->info->dev;
 
 	if (size != EXP_WFORM_SIZE) {
-		printk(KERN_ERR "Error: unexpected size %d != %d\n", size,
+		dev_err(dev, "Error: unexpected size %d != %d\n", size,
 					EXP_WFORM_SIZE);
 		return -EINVAL;
 	}
@@ -158,16 +153,16 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
 	wfm_hdr = (struct waveform_hdr *) mem;
 
 	if (wfm_hdr->fvsn != 1) {
-		printk(KERN_ERR "Error: bad fvsn %x\n", wfm_hdr->fvsn);
+		dev_err(dev, "Error: bad fvsn %x\n", wfm_hdr->fvsn);
 		return -EINVAL;
 	}
 	if (wfm_hdr->luts != 0) {
-		printk(KERN_ERR "Error: bad luts %x\n", wfm_hdr->luts);
+		dev_err(dev, "Error: bad luts %x\n", wfm_hdr->luts);
 		return -EINVAL;
 	}
 	cksum = calc_cksum(32, 47, mem);
 	if (cksum != wfm_hdr->wfm_cs) {
-		printk(KERN_ERR "Error: bad cksum %x != %x\n", cksum,
+		dev_err(dev, "Error: bad cksum %x != %x\n", cksum,
 					wfm_hdr->wfm_cs);
 		return -EINVAL;
 	}
@@ -175,7 +170,7 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
 	wfm_hdr->trc += 1;
 	for (i = 0; i < 5; i++) {
 		if (*(wfm_hdr->stuff2a + i) != 0) {
-			printk(KERN_ERR "Error: unexpected value in padding\n");
+			dev_err(dev, "Error: unexpected value in padding\n");
 			return -EINVAL;
 		}
 	}
@@ -200,7 +195,7 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
 		return -EINVAL;
 	cksum = calc_cksum(sizeof(*wfm_hdr), cksum_idx, mem);
 	if (cksum != mem[cksum_idx]) {
-		printk(KERN_ERR "Error: bad temperature range table cksum"
+		dev_err(dev, "Error: bad temperature range table cksum"
 				" %x != %x\n", cksum, mem[cksum_idx]);
 		return -EINVAL;
 	}
@@ -212,7 +207,7 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
 		return -EINVAL;
 	cksum = calc_cksum(cksum_idx - 3, cksum_idx, mem);
 	if (cksum != mem[cksum_idx]) {
-		printk(KERN_ERR "Error: bad mode table address cksum"
+		dev_err(dev, "Error: bad mode table address cksum"
 				" %x != %x\n", cksum, mem[cksum_idx]);
 		return -EINVAL;
 	}
@@ -224,7 +219,7 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
 		return -EINVAL;
 	cksum = calc_cksum(cksum_idx - 3, cksum_idx, mem);
 	if (cksum != mem[cksum_idx]) {
-		printk(KERN_ERR "Error: bad temperature table address cksum"
+		dev_err(dev, "Error: bad temperature table address cksum"
 			" %x != %x\n", cksum, mem[cksum_idx]);
 		return -EINVAL;
 	}
@@ -259,11 +254,11 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
 		return -EINVAL;
 	cksum = calc_cksum(owfm_idx, cksum_idx, mem);
 	if (cksum != mem[cksum_idx]) {
-		printk(KERN_ERR "Error: bad waveform data cksum"
+		dev_err(dev, "Error: bad waveform data cksum"
 				" %x != %x\n", cksum, mem[cksum_idx]);
 		return -EINVAL;
 	}
-	*frame_count = (mem_idx/64);
+	par->frame_count = (mem_idx/64);
 
 	return 0;
 }
@@ -662,15 +657,15 @@ static int __devinit metronomefb_probe(struct platform_device *dev)
 		b) process waveform and decode into metromem */
 	retval = request_firmware(&fw_entry, "metronome.wbf", &dev->dev);
 	if (retval < 0) {
-		printk(KERN_ERR "metronomefb: couldn't get waveform\n");
+		dev_err(&dev->dev, "Failed to get waveform\n");
 		goto err_dma_free;
 	}
 
-	retval = load_waveform((u8 *) fw_entry->data, fw_entry->size,
-				par->metromem_wfm, 3, 31, &par->frame_count);
+	retval = load_waveform((u8 *) fw_entry->data, fw_entry->size, 3, 31,
+				par);
 	release_firmware(fw_entry);
 	if (retval < 0) {
-		printk(KERN_ERR "metronomefb: couldn't process waveform\n");
+		dev_err(&dev->dev, "Failed processing waveform\n");
 		goto err_dma_free;
 	}
 
@@ -688,7 +683,7 @@ static int __devinit metronomefb_probe(struct platform_device *dev)
 
 	retval = fb_alloc_cmap(&info->cmap, 8, 0);
 	if (retval < 0) {
-		printk(KERN_ERR "Failed to allocate colormap\n");
+		dev_err(&dev->dev, "Failed to allocate colormap\n");
 		goto err_fb_rel;
 	}
 
@@ -704,7 +699,7 @@ static int __devinit metronomefb_probe(struct platform_device *dev)
 
 	platform_set_drvdata(dev, info);
 
-	printk(KERN_INFO
+	dev_dbg(&dev->dev,
 		"fb%d: Metronome frame buffer device, using %dK of video"
 		" memory\n", info->node, videomemorysize >> 10);
 
-- 
1.5.3.6


-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/

  parent reply	other threads:[~2008-07-20  7:07 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-07-20  6:10 [RFC 2.6.26-rc9 0/5] am200epd, pxafb, metronomefb changes v6 Jaya Kumar
2008-07-20  6:10 ` [RFC 2.6.26-rc9 1/5] pxafb: add shared framebuffer interface Jaya Kumar
2008-07-21 11:11   ` Russell King - ARM Linux
2008-07-21 12:32     ` Jaya Kumar
2008-07-21 13:53       ` SSP based framebuffer driver Blaine Booher
2008-07-26  3:30       ` [RFC 2.6.26-rc9 1/5] pxafb: add shared framebuffer interface Jaya Kumar
2008-07-30  2:41         ` Eric Miao
2008-07-30  3:10           ` Jaya Kumar
2008-07-20  6:10 ` [RFC 2.6.26-rc9 2/5] gumstix: conversion to MFP support and add bluetooth support Jaya Kumar
2008-07-21  2:13   ` eric miao
2008-07-20  6:10 ` [RFC 2.6.26-rc9 3/5] am200epd: convert to shared fb and use gpio api Jaya Kumar
2008-07-20  6:10 ` Jaya Kumar [this message]
2008-07-20  6:10 ` [RFC 2.6.26-rc9 5/5] metronomefb: changes to use separate framebuffer Jaya Kumar
  -- strict thread matches above, loose matches on Subject: below --
2008-07-26  4:32 [RFC 2.6.26-rc9 0/5] am200epd, pxafb, metronomefb changes v7 Jaya Kumar
2008-07-26  4:32 ` [RFC 2.6.26-rc9 4/5] metronomefb: convert printk to dev_dbg/err messages Jaya Kumar
2008-07-30  2:50   ` Eric Miao
2008-07-30  3:18     ` Jaya Kumar
2008-07-13 13:26 [RFC 2.6.26-rc9 0/5] am200epd, pxafb, metronomefb changes v5 Jaya Kumar
2008-07-13 13:26 ` [RFC 2.6.26-rc9 4/5] metronomefb: convert printk to dev_dbg/err messages Jaya Kumar
2008-07-16  7:09   ` eric miao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1216534233-26674-5-git-send-email-jayakumar.lkml@gmail.com \
    --to=jayakumar.lkml@gmail.com \
    --cc=linux-arm-kernel@lists.arm.linux.org.uk \
    --cc=linux-fbdev-devel@lists.sourceforge.net \
    --cc=ymiao3@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).