From: Jaya Kumar <jayakumar.lkml@gmail.com>
To: ymiao3@marvell.com
Cc: Jaya Kumar <jayakumar.lkml@gmail.com>,
linux-fbdev-devel@lists.sourceforge.net,
linux-arm-kernel@lists.arm.linux.org.uk
Subject: [RFC 2.6.26-rc9 3/5] pxafb: add shared framebuffer interface
Date: Wed, 30 Jul 2008 08:51:07 -0400 [thread overview]
Message-ID: <1217422269-11093-4-git-send-email-jayakumar.lkml@gmail.com> (raw)
In-Reply-To: <1217422269-11093-1-git-send-email-jayakumar.lkml@gmail.com>
These changes are to make it possible for a secondary driver to share the
pxafb framebuffer. The changes include:
- adding extra_video_mem entry so that a driver can tell pxafb of its
additional needs.
- adding share_video_mem/unshare_video_mem callbacks to notify the secondary
driver of the framebuffer address, to allow refcounting, and to cleanup on
completion.
Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
---
drivers/video/pxafb.c | 31 ++++++++++++++++++++++++++-----
include/asm-arm/arch-pxa/pxafb.h | 7 +++++++
2 files changed, 33 insertions(+), 5 deletions(-)
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index bb25143..f799c52 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -57,6 +57,8 @@
*/
#define DEBUG_VAR 1
+static struct platform_driver pxafb_driver;
+
#include "pxafb.h"
/* Bits which should not be set in machine configuration structures */
@@ -870,6 +872,7 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var,
{
u_long flags;
size_t nbytes;
+ struct pxafb_mach_info *inf = fbi->dev->platform_data;
#if DEBUG_VAR
if (!(fbi->lccr0 & LCCR0_LCDT)) {
@@ -1304,14 +1307,17 @@ static int pxafb_resume(struct platform_device *dev)
* cache. Once this area is remapped, all virtual memory
* access to the video memory should occur at the new region.
*/
-static int __devinit pxafb_map_video_memory(struct pxafb_info *fbi)
+static int __devinit pxafb_map_video_memory(struct pxafb_info *fbi,
+ struct pxafb_mach_info *inf)
{
+ int ret;
/*
* We reserve one page for the palette, plus the size
* of the framebuffer.
*/
fbi->video_offset = PAGE_ALIGN(sizeof(struct pxafb_dma_buff));
- fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + fbi->video_offset);
+ fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + fbi->video_offset +
+ inf->extra_video_mem);
fbi->map_cpu = dma_alloc_writecombine(fbi->dev, fbi->map_size,
&fbi->map_dma, GFP_KERNEL);
@@ -1340,6 +1346,13 @@ static int __devinit pxafb_map_video_memory(struct pxafb_info *fbi)
fbi->smart_cmds = (uint16_t *) fbi->dma_buff->cmd_buff;
fbi->n_smart_cmds = 0;
#endif
+ if (inf->share_video_mem) {
+ ret = inf->share_video_mem(fbi->fb.screen_base,
+ fbi->screen_dma, pxafb_driver.driver.owner,
+ inf->extra_data);
+ if (ret)
+ return ret;
+ }
}
return fbi->map_cpu ? 0 : -ENOMEM;
@@ -1761,10 +1774,12 @@ static int __devinit pxafb_probe(struct platform_device *dev)
}
/* Initialize video memory */
- ret = pxafb_map_video_memory(fbi);
- if (ret) {
+ ret = pxafb_map_video_memory(fbi, inf);
+ if (ret == -ENODEV) {
+ dev_err(&dev->dev, "Failed device binding: %d\n", ret);
+ goto failed_free_mem;
+ } else if (ret) {
dev_err(&dev->dev, "Failed to allocate video RAM: %d\n", ret);
- ret = -ENOMEM;
goto failed_free_io;
}
@@ -1836,6 +1851,8 @@ failed_free_cmap:
failed_free_irq:
free_irq(irq, fbi);
failed_free_mem:
+ if (inf->unshare_video_mem)
+ inf->unshare_video_mem(inf->extra_data);
dma_free_writecombine(&dev->dev, fbi->map_size,
fbi->map_cpu, fbi->map_dma);
failed_free_io:
@@ -1856,6 +1873,7 @@ static int __devexit pxafb_remove(struct platform_device *dev)
struct resource *r;
int irq;
struct fb_info *info;
+ struct pxafb_mach_info *inf;
if (!fbi)
return 0;
@@ -1872,6 +1890,9 @@ static int __devexit pxafb_remove(struct platform_device *dev)
irq = platform_get_irq(dev, 0);
free_irq(irq, fbi);
+ inf = dev->dev.platform_data;
+ if (inf->unshare_video_mem)
+ inf->unshare_video_mem(inf->extra_data);
dma_free_writecombine(&dev->dev, fbi->map_size,
fbi->map_cpu, fbi->map_dma);
diff --git a/include/asm-arm/arch-pxa/pxafb.h b/include/asm-arm/arch-pxa/pxafb.h
index daf018d..1ff9281 100644
--- a/include/asm-arm/arch-pxa/pxafb.h
+++ b/include/asm-arm/arch-pxa/pxafb.h
@@ -139,9 +139,16 @@ struct pxafb_mach_info {
* All other bits in LCCR4 should be left alone.
*/
u_int lccr4;
+ /* size of extra mem needed for secondary driver */
+ unsigned int extra_video_mem;
+ void *extra_data; /* extra data for secondary */
void (*pxafb_backlight_power)(int);
void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
void (*smart_update)(struct fb_info *);
+ /* share_video_mem allows client drivers to get our framebuffer */
+ int (*share_video_mem)(char __iomem *, dma_addr_t, struct module *,
+ void *);
+ void (*unshare_video_mem)(void *);
};
void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
void set_pxa_fb_parent(struct device *parent_dev);
--
1.5.3.6
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
next prev parent reply other threads:[~2008-07-30 13:47 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-30 12:51 [RFC 2.6.26-rc9 0/5] am200epd, pxafb, metronomefb changes v8 Jaya Kumar
2008-07-30 12:51 ` [RFC 2.6.26-rc9 1/5] metronomefb: convert printk to dev_dbg/err messages Jaya Kumar
2008-07-30 12:51 ` [RFC 2.6.26-rc9 2/5] gumstix: conversion to MFP support and add bluetooth support Jaya Kumar
2008-07-30 12:51 ` Jaya Kumar [this message]
2008-07-31 15:28 ` [RFC 2.6.26-rc9 3/5] pxafb: add shared framebuffer interface Krzysztof Helt
2008-08-02 12:06 ` Jaya Kumar
2008-07-30 12:51 ` [RFC 2.6.26-rc9 4/5] am200epd: convert to shared fb and use gpio api Jaya Kumar
2008-07-31 15:46 ` Krzysztof Helt
2008-08-02 13:32 ` Jaya Kumar
2008-08-03 14:29 ` Krzysztof Helt
2008-07-30 12:51 ` [RFC 2.6.26-rc9 5/5] metronomefb: changes to use separate framebuffer Jaya Kumar
2008-08-01 20:47 ` Krzysztof Helt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1217422269-11093-4-git-send-email-jayakumar.lkml@gmail.com \
--to=jayakumar.lkml@gmail.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-fbdev-devel@lists.sourceforge.net \
--cc=ymiao3@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).