[PATCH] davinci: fb: Calculate the clock divider from pixel clock info

[Chaithrika U S <chaithrika@ti.com>]

The clock divider value can be calculated from the pixel clock
value for the panel. This gives more flexiblity to the driver
to change the divider value on the fly as in the case of cpufreq
feature- support for which will be added shortly.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
---
This patch applies to Linus' kernel tree

 drivers/video/da8xx-fb.c |   29 +++++++++++++++++++++--------
 1 files changed, 21 insertions(+), 8 deletions(-)

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index d065894..7615939 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -113,6 +113,7 @@ struct da8xx_fb_par {
 	unsigned short pseudo_palette[16];
 	unsigned int databuf_sz;
 	unsigned int palette_sz;
+	unsigned int pxl_clk;
 };
 
 /* Variable Screen Information */
@@ -155,7 +156,7 @@ struct da8xx_panel {
 	int		vfp;		/* Vertical front porch */
 	int		vbp;		/* Vertical back porch */
 	int		vsw;		/* Vertical Sync Pulse Width */
-	int		pxl_clk;	/* Pixel clock */
+	unsigned int	pxl_clk;	/* Pixel clock */
 	unsigned char	invert_pxl_clk;	/* Invert Pixel clock */
 };
 
@@ -171,7 +172,7 @@ static struct da8xx_panel known_lcd_panels[] = {
 		.vfp = 2,
 		.vbp = 2,
 		.vsw = 0,
-		.pxl_clk = 0x10,
+		.pxl_clk = 4608000,
 		.invert_pxl_clk = 1,
 	},
 	/* Sharp LK043T1DG01 */
@@ -185,7 +186,7 @@ static struct da8xx_panel known_lcd_panels[] = {
 		.vfp = 2,
 		.vbp = 2,
 		.vsw = 10,
-		.pxl_clk = 0x12,
+		.pxl_clk = 7833600,
 		.invert_pxl_clk = 0,
 	},
 };
@@ -451,17 +452,29 @@ static void lcd_reset(struct da8xx_fb_par *par)
 	lcdc_write(0, LCD_RASTER_CTRL_REG);
 }
 
+static void lcd_calc_clk_divider(struct da8xx_fb_par *par)
+{
+	unsigned int lcd_clk, div;
+
+	lcd_clk = clk_get_rate(par->lcdc_clk);
+	div = lcd_clk / par->pxl_clk;
+
+	/* Configure the LCD clock divisor. */
+	lcdc_write(LCD_CLK_DIVISOR(div) |
+			(LCD_RASTER_MODE & 0x1), LCD_CTRL_REG);
+}
+
 static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
 		struct da8xx_panel *panel)
 {
 	u32 bpp;
 	int ret = 0;
+	unsigned int lcd_clk, div;
 
 	lcd_reset(par);
 
-	/* Configure the LCD clock divisor. */
-	lcdc_write(LCD_CLK_DIVISOR(panel->pxl_clk) |
-			(LCD_RASTER_MODE & 0x1), LCD_CTRL_REG);
+	/* Calculate the divider */
+	lcd_calc_clk_divider(par);
 
 	if (panel->invert_pxl_clk)
 		lcdc_write((lcdc_read(LCD_RASTER_TIMING_2_REG) |
@@ -721,6 +734,8 @@ static int __init fb_probe(struct platform_device *device)
 	}
 
 	par = da8xx_fb_info->par;
+	par->lcdc_clk = fb_clk;
+	par->pxl_clk = lcdc_info->pxl_clk;
 
 	if (lcd_init(par, lcd_cfg, lcdc_info) < 0) {
 		dev_err(&device->dev, "lcd_init failed\n");
@@ -753,8 +768,6 @@ static int __init fb_probe(struct platform_device *device)
 	da8xx_fb_fix.smem_len = par->databuf_sz - par->palette_sz;
 	da8xx_fb_fix.line_length = (lcdc_info->width * lcd_cfg->bpp) / 8;
 
-	par->lcdc_clk = fb_clk;
-
 	par->irq = platform_get_irq(device, 0);
 	if (par->irq < 0) {
 		ret = -ENOENT;
-- 
1.5.6


------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay 
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference