From mboxrd@z Thu Jan 1 00:00:00 1970 From: hvaibhav@ti.com Date: Thu, 17 Dec 2009 15:31:36 +0000 Subject: [PATCH 5/5] OMAP3EVM: Kconfig option added for selection between SVIDEO and CVBS Message-Id: <1261063176-20101-1-git-send-email-hvaibhav@ti.com> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: tomi.valkeinen@nokia.com Cc: linux-omap@vger.kernel.org, linux-fbdev-devel@lists.sourceforge.net, linux-fbdev@vger.kernel.org, Vaibhav Hiremath From: Vaibhav Hiremath Config option added to arch/arm/plat-omap/Kconfig for selection of S-Video and Composite output interfaces. The default configuration would be S-Video. Signed-off-by: Vaibhav Hiremath --- arch/arm/mach-omap2/board-omap3evm.c | 4 ++++ drivers/video/omap2/dss/Kconfig | 15 +++++++++++++++ 2 files changed, 19 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index e615254..549e58e 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -275,7 +275,11 @@ static struct omap_dss_device omap3_evm_tv_device = { .name = "tv", .driver_name = "venc", .type = OMAP_DISPLAY_TYPE_VENC, +#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO) .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE) + .u.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE, +#endif .platform_enable = omap3_evm_enable_tv, .platform_disable = omap3_evm_disable_tv, }; diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig index 71d8dec..5b7a8bc 100644 --- a/drivers/video/omap2/dss/Kconfig +++ b/drivers/video/omap2/dss/Kconfig @@ -36,6 +36,21 @@ config OMAP2_DSS_VENC default y help OMAP Video Encoder support. +choice + prompt OMAP2_VENC_OUT_TYPE + depends on OMAP2_DSS_VENC + default OMAP2_VENC_OUT_TYPE_SVIDEO + +config OMAP2_VENC_OUT_TYPE_SVIDEO + bool "Use S-Video output interface" + help + Select this option if you want to choose TV out over S-Video + +config OMAP2_VENC_OUT_TYPE_COMPOSITE + bool "Use Composite output interface" + help + Select this option if you want to choose TV out over Composite +endchoice config OMAP2_DSS_SDI bool "SDI support" -- 1.6.2.4