From: Grazvydas Ignotas <notasas@gmail.com>
To: linux-fbdev@vger.kernel.org
Cc: linux-omap@vger.kernel.org,
Tomi Valkeinen <tomi.valkeinen@nokia.com>,
Grazvydas Ignotas <notasas@gmail.com>
Subject: [PATCHv2] OMAP: pandora: add DSS2 support and related regulators
Date: Wed, 13 Jan 2010 21:19:07 +0000 [thread overview]
Message-ID: <1263417547-24575-1-git-send-email-notasas@gmail.com> (raw)
This patch adds configuration data for DSS2 and sets up
display related regulators.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
---
arch/arm/mach-omap2/board-omap3pandora.c | 109 ++++++++++++++++++++++++++++++
1 files changed, 109 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index ef17cf1..bd3e577 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -40,6 +40,7 @@
#include <mach/hardware.h>
#include <plat/mcspi.h>
#include <plat/usb.h>
+#include <plat/display.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
@@ -192,6 +193,61 @@ static struct twl4030_keypad_data pandora_kp_data = {
.rep = 1,
};
+static struct omap_dss_device pandora_lcd_device = {
+ .name = "lcd",
+ .driver_name = "tpo_td043mtea1_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 24,
+ .reset_gpio = 157,
+};
+
+static struct omap_dss_device pandora_tv_device = {
+ .name = "tv",
+ .driver_name = "venc",
+ .type = OMAP_DISPLAY_TYPE_VENC,
+ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+};
+
+static struct omap_dss_device *pandora_dss_devices[] = {
+ &pandora_lcd_device,
+ &pandora_tv_device,
+};
+
+static struct omap_dss_board_info pandora_dss_data = {
+ .num_devices = ARRAY_SIZE(pandora_dss_devices),
+ .devices = pandora_dss_devices,
+ .default_device = &pandora_lcd_device,
+};
+
+static struct platform_device pandora_dss_device = {
+ .name = "omapdss",
+ .id = -1,
+ .dev = {
+ .platform_data = &pandora_dss_data,
+ },
+};
+
+static struct regulator_consumer_supply pandora_vcc_lcd_supply = {
+ .supply = "vcc",
+ .dev = &pandora_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply pandora_vdda_dac_supply = {
+ .supply = "vdda_dac",
+ .dev = &pandora_dss_device.dev,
+};
+
+static struct regulator_consumer_supply pandora_vdds_supplies[] = {
+ {
+ .supply = "vdds_sdi",
+ .dev = &pandora_dss_device.dev,
+ },
+ {
+ .supply = "vdds_dsi",
+ .dev = &pandora_dss_device.dev,
+ },
+};
+
static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
{
.mmc = 1,
@@ -277,6 +333,49 @@ static struct regulator_init_data pandora_vmmc2 = {
.consumer_supplies = &pandora_vmmc2_supply,
};
+/* VDAC for DSS driving S-Video */
+static struct regulator_init_data pandora_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data pandora_vpll2 = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(pandora_vdds_supplies),
+ .consumer_supplies = pandora_vdds_supplies,
+};
+
+/* VAUX1 for LCD */
+static struct regulator_init_data pandora_vaux1 = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_vcc_lcd_supply,
+};
+
static struct twl4030_usb_data omap3pandora_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
@@ -298,6 +397,9 @@ static struct twl4030_platform_data omap3pandora_twldata = {
.codec = &omap3pandora_codec_data,
.vmmc1 = &pandora_vmmc1,
.vmmc2 = &pandora_vmmc2,
+ .vdac = &pandora_vdac,
+ .vpll2 = &pandora_vpll2,
+ .vaux1 = &pandora_vaux1,
.keypad = &pandora_kp_data,
};
@@ -365,6 +467,12 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
.controller_data = &ads7846_mcspi_config,
.irq = OMAP_GPIO_IRQ(OMAP3_PANDORA_TS_GPIO),
.platform_data = &ads7846_config,
+ }, {
+ .modalias = "tpo_td043mtea1_panel_spi",
+ .bus_num = 1,
+ .chip_select = 1,
+ .max_speed_hz = 375000,
+ .platform_data = &pandora_lcd_device,
}
};
@@ -379,6 +487,7 @@ static void __init omap3pandora_init_irq(void)
static struct platform_device *omap3pandora_devices[] __initdata = {
&pandora_leds_gpio,
&pandora_keys_gpio,
+ &pandora_dss_device,
};
static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
--
1.6.3.3
reply other threads:[~2010-01-13 21:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1263417547-24575-1-git-send-email-notasas@gmail.com \
--to=notasas@gmail.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tomi.valkeinen@nokia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).