Re: [PATCHv2 0/5] OMAP: RX51: Add LCD Panel Support for N900

[Tomi Valkeinen <tomi.valkeinen@nokia.com>]

Hi,

On Thu, 2010-04-08 at 14:21 +0200, Quadros Roger (Nokia-D/Helsinki)
wrote:
> Tomi,
> 
> Please take these in your DSS branch if they are OK.
> Tony is fine if you take the board stuff too.

checkpatch complained about using spaces for indenting. Can you check
the patches?

 Tomi

> 
> regards,
> -roger
> 
> These patches get the N900 LCD panel working.
> Apply's cleanly on 2.6.34-rc3
> 
> Pre-requisites:
> https://patchwork.kernel.org/patch/86318/
> https://patchwork.kernel.org/patch/86319/
> https://patchwork.kernel.org/patch/86320/
> 
> Changes since v1:
> -Added Backlight control
> 
> ---
> Roger Quadros (5):
>   OMAP: RX51: Add LCD Panel support
>   OMAP: RX51: Add "vdds_sdi" supply voltage for SDI
>   OMAP: RX51: Add Touch Controller in SPI board info
>   OMAP: DSS2: Add ACX565AKM Panel Driver
>   OMAP: RX51: Update board defconfig
> 
>  arch/arm/configs/rx51_defconfig                |   39 ++-
>  arch/arm/mach-omap2/Makefile                   |    1 +
>  arch/arm/mach-omap2/board-rx51-peripherals.c   |   43 ++
>  arch/arm/mach-omap2/board-rx51-video.c         |   95 +++
>  drivers/video/omap2/displays/Kconfig           |    6 +
>  drivers/video/omap2/displays/Makefile          |    1 +
>  drivers/video/omap2/displays/panel-acx565akm.c |  819 ++++++++++++++++++++++++
>  7 files changed, 1003 insertions(+), 1 deletions(-)
>  create mode 100644 arch/arm/mach-omap2/board-rx51-video.c
>  create mode 100644 drivers/video/omap2/displays/panel-acx565akm.c
>