From: Lars-Peter Clausen <lars@metafoo.de>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org, linux-kernel@vger.kernel.org,
Lars-Peter Clausen <lars@metafoo.de>,
Alessandro Zummo <a.zummo@towertech.it>,
Andrew Morton <akpm@linux-foundation.org>,
Anton Vorontsov <cbouatmailru@gmail.com>,
David Brownell <dbrownell@users.sourceforge.net>,
David Woodhouse <dwmw2@infradead.org>,
Greg Kroah-Hartman <gregkh@suse.de>,
Liam Girdwood <lrg@slimlogic.co.uk>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Paul Gortmaker <p_gortmaker@yahoo.com>,
Samuel Ortiz <sameo@linux.intel.com>,
alsa-devel@alsa-project.org, linux-fbdev@vger.kernel.org,
linux-mmc@vger.kernel.org, linux-mtd@lists.infradead.org,
linux-usb@vger.kernel.org, lm-sensors@lm-sensors.org,
rtc-linux@googlegroups.com
Subject: [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip
Date: Sat, 19 Jun 2010 05:08:05 +0000 [thread overview]
Message-ID: <1276924111-11158-1-git-send-email-lars@metafoo.de> (raw)
Foreword:
Ralf suggested that it might be a good idea in order to allow for reasonable
testing and to avoid build failures due to two-way dependencies in different
parts of the kernel, that he applies all the patches once they have been acked
by their respective maintainers, feeds them into -next and eventually sends the
whole series to Linus. One exception will be the ASoC patches which will, due to
major changes in the ASoC subsystem, go through the ASoC tree.
So if you are a maintainer for one of the subsystem touched by this series and
would rather see the patch going through your tree (given the patch is ok)
please tell.
This patch series adds support for the Ingenic JZ4740 System-on-a-Chip.
The JZ4740 has a mostly MIPS32 compatible core (no on cpu timers) and many on
chip peripherals like RTC, NAND, MMC, OHCI, UDC, ADC, I2C, SPI, AC97, I2S, I2S
Codec, UART and LCD controller.
The JZ4740 is mostly used in eBooks, PMPs and hand-held consoles.
This series contains patches for the Qi Ben NanoNote clamshell device as the
inital supported device.
Changes since v1:
There have been some minor changes since v1, mostly code cleanup and some
functional changes. One bigger change is that there is now a MFD driver for
the ADC core which does IRQ demultiplexing for the ADC unit and synchronizes
access to shared registers between the different users of the ADC core.
The patch adding a defconfig for the Qi LB60 has been dropped.
A detailed list of changes is present in each patch.
- Lars
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-usb@vger.kernel.org
Cc: lm-sensors@lm-sensors.org
Cc: rtc-linux@googlegroups.com
Lars-Peter Clausen (26):
MIPS: Add base support for Ingenic JZ4740 System-on-a-Chip
MIPS: jz4740: Add IRQ handler code
MIPS: JZ4740: Add clock API support.
MIPS: JZ4740: Add timer support
MIPS: JZ4740: Add clocksource/clockevent support.
MIPS: JZ4740: Add power-management and system reset support
MIPS: JZ4740: Add setup code
MIPS: JZ4740: Add gpio support
MIPS: JZ4740: Add DMA support.
MIPS: JZ4740: Add PWM support
MIPS: JZ4740: Add serial support
MIPS: JZ4740: Add prom support
MIPS: JZ4740: Add platform devices
MIPS: JZ4740: Add Kbuild files
RTC: Add JZ4740 RTC driver
fbdev: Add JZ4740 framebuffer driver
MTD: Nand: Add JZ4740 NAND driver
MMC: Add JZ4740 mmc driver
USB: Add JZ4740 ohci support
alsa: ASoC: Add JZ4740 codec driver
alsa: ASoC: Add JZ4740 ASoC support
MFD: Add JZ4740 ADC driver
hwmon: Add JZ4740 ADC driver
power: Add JZ4740 battery driver.
MIPS: JZ4740: Add qi_lb60 board support
alsa: ASoC: JZ4740: Add qi_lb60 board driver
arch/mips/Kbuild.platforms | 1 +
arch/mips/Kconfig | 13 +
arch/mips/include/asm/bootinfo.h | 6 +
arch/mips/include/asm/cpu.h | 9 +-
arch/mips/include/asm/mach-jz4740/base.h | 26 +
arch/mips/include/asm/mach-jz4740/clock.h | 28 +
arch/mips/include/asm/mach-jz4740/dma.h | 90 +++
arch/mips/include/asm/mach-jz4740/gpio.h | 398 +++++++++++
arch/mips/include/asm/mach-jz4740/irq.h | 57 ++
arch/mips/include/asm/mach-jz4740/platform.h | 36 +
arch/mips/include/asm/mach-jz4740/timer.h | 22 +
arch/mips/include/asm/mach-jz4740/war.h | 25 +
arch/mips/jz4740/Kconfig | 12 +
arch/mips/jz4740/Makefile | 20 +
arch/mips/jz4740/Platform | 5 +
arch/mips/jz4740/board-qi_lb60.c | 483 +++++++++++++
arch/mips/jz4740/clock-debugfs.c | 109 +++
arch/mips/jz4740/clock.c | 920 ++++++++++++++++++++++++
arch/mips/jz4740/clock.h | 76 ++
arch/mips/jz4740/dma.c | 289 ++++++++
arch/mips/jz4740/gpio.c | 601 ++++++++++++++++
arch/mips/jz4740/irq.c | 169 +++++
arch/mips/jz4740/irq.h | 21 +
arch/mips/jz4740/platform.c | 284 ++++++++
arch/mips/jz4740/pm.c | 56 ++
arch/mips/jz4740/prom.c | 68 ++
arch/mips/jz4740/pwm.c | 169 +++++
arch/mips/jz4740/reset.c | 79 ++
arch/mips/jz4740/reset.h | 7 +
arch/mips/jz4740/serial.c | 33 +
arch/mips/jz4740/serial.h | 21 +
arch/mips/jz4740/setup.c | 29 +
arch/mips/jz4740/time.c | 144 ++++
arch/mips/jz4740/timer.c | 48 ++
arch/mips/jz4740/timer.h | 136 ++++
arch/mips/kernel/cpu-probe.c | 20 +
arch/mips/mm/tlbex.c | 5 +
drivers/hwmon/Kconfig | 11 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/jz4740-hwmon.c | 206 ++++++
drivers/mfd/Kconfig | 8 +
drivers/mfd/Makefile | 1 +
drivers/mfd/jz4740-adc.c | 392 ++++++++++
drivers/mmc/host/Kconfig | 8 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/jz4740_mmc.c | 993 ++++++++++++++++++++++++++
drivers/mtd/nand/Kconfig | 6 +
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/jz4740_nand.c | 474 ++++++++++++
drivers/power/Kconfig | 11 +
drivers/power/Makefile | 1 +
drivers/power/jz4740-battery.c | 445 ++++++++++++
drivers/rtc/Kconfig | 11 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-jz4740.c | 341 +++++++++
drivers/usb/Kconfig | 1 +
drivers/usb/host/ohci-hcd.c | 5 +
drivers/usb/host/ohci-jz4740.c | 276 +++++++
drivers/video/Kconfig | 9 +
drivers/video/Makefile | 1 +
drivers/video/jz4740_fb.c | 817 +++++++++++++++++++++
include/linux/jz4740-adc.h | 32 +
include/linux/jz4740_fb.h | 58 ++
include/linux/mmc/jz4740_mmc.h | 15 +
include/linux/mtd/jz4740_nand.h | 34 +
include/linux/power/jz4740-battery.h | 24 +
sound/soc/Kconfig | 1 +
sound/soc/Makefile | 1 +
sound/soc/codecs/Kconfig | 4 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/jz4740-codec.c | 514 +++++++++++++
sound/soc/codecs/jz4740-codec.h | 20 +
sound/soc/jz4740/Kconfig | 23 +
sound/soc/jz4740/Makefile | 13 +
sound/soc/jz4740/jz4740-i2s.c | 540 ++++++++++++++
sound/soc/jz4740/jz4740-i2s.h | 18 +
sound/soc/jz4740/jz4740-pcm.c | 373 ++++++++++
sound/soc/jz4740/jz4740-pcm.h | 22 +
sound/soc/jz4740/qi_lb60.c | 167 +++++
79 files changed, 10396 insertions(+), 1 deletions(-)
create mode 100644 arch/mips/include/asm/mach-jz4740/base.h
create mode 100644 arch/mips/include/asm/mach-jz4740/clock.h
create mode 100644 arch/mips/include/asm/mach-jz4740/dma.h
create mode 100644 arch/mips/include/asm/mach-jz4740/gpio.h
create mode 100644 arch/mips/include/asm/mach-jz4740/irq.h
create mode 100644 arch/mips/include/asm/mach-jz4740/platform.h
create mode 100644 arch/mips/include/asm/mach-jz4740/timer.h
create mode 100644 arch/mips/include/asm/mach-jz4740/war.h
create mode 100644 arch/mips/jz4740/Kconfig
create mode 100644 arch/mips/jz4740/Makefile
create mode 100644 arch/mips/jz4740/Platform
create mode 100644 arch/mips/jz4740/board-qi_lb60.c
create mode 100644 arch/mips/jz4740/clock-debugfs.c
create mode 100644 arch/mips/jz4740/clock.c
create mode 100644 arch/mips/jz4740/clock.h
create mode 100644 arch/mips/jz4740/dma.c
create mode 100644 arch/mips/jz4740/gpio.c
create mode 100644 arch/mips/jz4740/irq.c
create mode 100644 arch/mips/jz4740/irq.h
create mode 100644 arch/mips/jz4740/platform.c
create mode 100644 arch/mips/jz4740/pm.c
create mode 100644 arch/mips/jz4740/prom.c
create mode 100644 arch/mips/jz4740/pwm.c
create mode 100644 arch/mips/jz4740/reset.c
create mode 100644 arch/mips/jz4740/reset.h
create mode 100644 arch/mips/jz4740/serial.c
create mode 100644 arch/mips/jz4740/serial.h
create mode 100644 arch/mips/jz4740/setup.c
create mode 100644 arch/mips/jz4740/time.c
create mode 100644 arch/mips/jz4740/timer.c
create mode 100644 arch/mips/jz4740/timer.h
create mode 100644 drivers/hwmon/jz4740-hwmon.c
create mode 100644 drivers/mfd/jz4740-adc.c
create mode 100644 drivers/mmc/host/jz4740_mmc.c
create mode 100644 drivers/mtd/nand/jz4740_nand.c
create mode 100644 drivers/power/jz4740-battery.c
create mode 100644 drivers/rtc/rtc-jz4740.c
create mode 100644 drivers/usb/host/ohci-jz4740.c
create mode 100644 drivers/video/jz4740_fb.c
create mode 100644 include/linux/jz4740-adc.h
create mode 100644 include/linux/jz4740_fb.h
create mode 100644 include/linux/mmc/jz4740_mmc.h
create mode 100644 include/linux/mtd/jz4740_nand.h
create mode 100644 include/linux/power/jz4740-battery.h
create mode 100644 sound/soc/codecs/jz4740-codec.c
create mode 100644 sound/soc/codecs/jz4740-codec.h
create mode 100644 sound/soc/jz4740/Kconfig
create mode 100644 sound/soc/jz4740/Makefile
create mode 100644 sound/soc/jz4740/jz4740-i2s.c
create mode 100644 sound/soc/jz4740/jz4740-i2s.h
create mode 100644 sound/soc/jz4740/jz4740-pcm.c
create mode 100644 sound/soc/jz4740/jz4740-pcm.h
create mode 100644 sound/soc/jz4740/qi_lb60.c
next reply other threads:[~2010-06-19 5:08 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-19 5:08 Lars-Peter Clausen [this message]
2010-06-19 5:08 ` [PATCH v2 16/26] fbdev: Add JZ4740 framebuffer driver Lars-Peter Clausen
2010-07-04 22:27 ` Lars-Peter Clausen
2010-07-07 23:41 ` Andrew Morton
2010-07-08 13:28 ` Lars-Peter Clausen
2010-07-08 16:46 ` Andrew Morton
2010-07-09 1:26 ` Jaya Kumar
2010-07-09 15:31 ` Lars-Peter Clausen
2010-07-17 12:14 ` [PATCH v3] " Lars-Peter Clausen
2010-06-20 9:26 ` [PATCH v2 00/26] Add support for the Ingenic JZ4740 Thomas Bogendoerfer
2010-06-21 2:56 ` [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip Xiangfu Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1276924111-11158-1-git-send-email-lars@metafoo.de \
--to=lars@metafoo.de \
--cc=a.zummo@towertech.it \
--cc=akpm@linux-foundation.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=cbouatmailru@gmail.com \
--cc=dbrownell@users.sourceforge.net \
--cc=dwmw2@infradead.org \
--cc=gregkh@suse.de \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=lrg@slimlogic.co.uk \
--cc=p_gortmaker@yahoo.com \
--cc=ralf@linux-mips.org \
--cc=rtc-linux@googlegroups.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).