From: Sascha Hauer <s.hauer@pengutronix.de>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RFC] i.MX51 Framebuffer support
Date: Thu, 09 Dec 2010 13:47:12 +0000 [thread overview]
Message-ID: <1291902441-24712-1-git-send-email-s.hauer@pengutronix.de> (raw)
Hi,
The following series adds i.MX51 framebuffer support based on the IPUv3. It
is not perfect but I decided it is good enough to open it for a wider audience
and collect first reviews. I tested this on a babbage board using both outputs
(VGA/DVI) with different resolutions up to 1680x1050 and different colour depths.
I also tested it on one custom board using a fixed display setting.
Sascha
The following changes since commit a96a688dcea84047c982dfbb61a335fa00d14f9a:
mx51: support FIQ on TZIC, revised (2010-12-07 22:29:32 +0100)
are available in the git repository at:
git://git.pengutronix.de/git/imx/linux-2.6.git ipuv3
Sascha Hauer (9):
ARM i.MX51: Add ipu clock support
ARM i.MX51: rename IPU irqs
Add a mfd IPUv3 driver
fb: export fb mode db table
Add i.MX5 framebuffer driver
ARM i.MX51: Add IPU device support
ARM i.MX5: Allow to increase max zone order
ARM i.MX5: increase dma consistent size for IPU support
ARM i.MX51 babbage: Add framebuffer support
arch/arm/Kconfig | 4 +-
arch/arm/mach-mx5/Kconfig | 1 +
arch/arm/mach-mx5/board-mx51_babbage.c | 74 ++
arch/arm/mach-mx5/clock-mx51-mx53.c | 140 ++++
arch/arm/mach-mx5/devices-imx51.h | 4 +
arch/arm/plat-mxc/devices/Kconfig | 4 +
arch/arm/plat-mxc/devices/Makefile | 1 +
arch/arm/plat-mxc/devices/platform-imx_ipuv3.c | 47 ++
arch/arm/plat-mxc/include/mach/devices-common.h | 10 +
arch/arm/plat-mxc/include/mach/ipu-v3.h | 48 ++
arch/arm/plat-mxc/include/mach/memory.h | 2 +-
arch/arm/plat-mxc/include/mach/mx51.h | 4 +-
drivers/mfd/Kconfig | 7 +
drivers/mfd/Makefile | 1 +
drivers/mfd/imx-ipu-v3/Makefile | 3 +
drivers/mfd/imx-ipu-v3/ipu-common.c | 661 ++++++++++++++++++
drivers/mfd/imx-ipu-v3/ipu-cpmem.c | 608 ++++++++++++++++
drivers/mfd/imx-ipu-v3/ipu-dc.c | 362 ++++++++++
drivers/mfd/imx-ipu-v3/ipu-di.c | 507 ++++++++++++++
drivers/mfd/imx-ipu-v3/ipu-dmfc.c | 343 +++++++++
drivers/mfd/imx-ipu-v3/ipu-dp.c | 468 +++++++++++++
drivers/mfd/imx-ipu-v3/ipu-prv.h | 214 ++++++
drivers/video/Kconfig | 11 +
drivers/video/Makefile | 1 +
drivers/video/modedb.c | 7 +-
drivers/video/mx5fb.c | 846 +++++++++++++++++++++++
include/linux/fb.h | 3 +
include/linux/mfd/imx-ipu-v3.h | 218 ++++++
28 files changed, 4593 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/plat-mxc/devices/platform-imx_ipuv3.c
create mode 100644 arch/arm/plat-mxc/include/mach/ipu-v3.h
create mode 100644 drivers/mfd/imx-ipu-v3/Makefile
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-common.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-cpmem.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-dc.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-di.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-dmfc.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-dp.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-prv.h
create mode 100644 drivers/video/mx5fb.c
create mode 100644 include/linux/mfd/imx-ipu-v3.h
next reply other threads:[~2010-12-09 13:47 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-09 13:47 Sascha Hauer [this message]
2010-12-09 13:47 ` [PATCH 1/9] ARM i.MX51: Add ipu clock support Sascha Hauer
2010-12-15 15:40 ` Arnd Bergmann
2010-12-15 16:34 ` Russell King - ARM Linux
2010-12-15 16:49 ` Arnd Bergmann
2010-12-15 17:12 ` Russell King - ARM Linux
2010-12-09 13:47 ` [PATCH 2/9] ARM i.MX51: rename IPU irqs Sascha Hauer
2010-12-09 14:34 `
2010-12-09 13:47 ` [PATCH 4/9] fb: export fb mode db table Sascha Hauer
2011-01-06 7:26 ` Paul Mundt
2011-01-06 10:04 ` Sascha Hauer
2010-12-09 13:47 ` [PATCH 5/9] Add i.MX5 framebuffer driver Sascha Hauer
2010-12-12 6:13 ` Liu Ying
2010-12-13 7:23 ` Lothar Waßmann
2010-12-13 11:35 ` Liu Ying
2010-12-13 11:38 ` Sascha Hauer
2010-12-14 6:40 ` Liu Ying
2010-12-14 8:45 ` Sascha Hauer
2010-12-14 13:23 ` Liu Ying
2010-12-15 11:17 ` Sascha Hauer
2010-12-09 13:47 ` [PATCH 6/9] ARM i.MX51: Add IPU device support Sascha Hauer
2010-12-15 15:49 ` Arnd Bergmann
2010-12-15 16:26 ` Arnaud Patard
2010-12-15 16:29 ` Arnd Bergmann
2010-12-09 13:47 ` [PATCH 7/9] ARM i.MX5: Allow to increase max zone order Sascha Hauer
2010-12-09 13:47 ` [PATCH 8/9] ARM i.MX5: increase dma consistent size for IPU support Sascha Hauer
2010-12-09 13:47 ` [PATCH 9/9] ARM i.MX51 babbage: Add framebuffer support Sascha Hauer
2010-12-12 1:37 ` Liu Ying
2010-12-13 11:43 ` Sascha Hauer
2010-12-14 6:47 ` Liu Ying
[not found] ` <1291902441-24712-4-git-send-email-s.hauer@pengutronix.de>
[not found] ` <AANLkTine90yN=e-J_zr03GmGCXekEWTPKv0pB5-EhA1v@mail.gmail.com>
2010-12-13 11:23 ` [PATCH 3/9] Add a mfd IPUv3 driver Sascha Hauer
2010-12-14 4:05 ` Liu Ying
2010-12-14 8:40 ` Sascha Hauer
2010-12-14 13:13 ` Liu Ying
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291902441-24712-1-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).