From: Carl Vanderlip <carlv@codeaurora.org>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/20] video: msm: Allow users to request a larger x and y virtual fb
Date: Fri, 18 Mar 2011 21:56:21 +0000 [thread overview]
Message-ID: <1300485381-27201-1-git-send-email-carlv@codeaurora.org> (raw)
In-Reply-To: <1300484846-26393-1-git-send-email-carlv@codeaurora.org>
As long as the total size fits inside the memory allocated to the framebuffer
users can request a larger size. This change allows users to request a triple
buffered fb.
Authors:
Dima Zavin <dima@android.com>
Rebecca Schultz Zavin <rebecca@android.com>
Colin Cross <ccross@android.com>
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
---
drivers/video/msm/msm_fb.c | 63 ++++++++++++++++++++++++++++++++++---------
1 files changed, 50 insertions(+), 13 deletions(-)
diff --git a/drivers/video/msm/msm_fb.c b/drivers/video/msm/msm_fb.c
index 04d0067..6af8b41 100644
--- a/drivers/video/msm/msm_fb.c
+++ b/drivers/video/msm/msm_fb.c
@@ -53,6 +53,9 @@ do { \
printk(KERN_INFO "msmfb: "fmt, ##args); \
} while (0)
+#define BITS_PER_PIXEL(info) (info->fb->var.bits_per_pixel)
+#define BYTES_PER_PIXEL(info) (info->fb->var.bits_per_pixel >> 3)
+
static int msmfb_debug_mask;
module_param_named(msmfb_debug_mask, msmfb_debug_mask, int,
S_IRUGO | S_IWUSR | S_IWGRP);
@@ -161,9 +164,10 @@ static int msmfb_start_dma(struct msmfb_info *msmfb)
}
spin_unlock_irqrestore(&msmfb->update_lock, irq_flags);
- addr = ((msmfb->xres * (yoffset + y) + x) * 2);
+ addr = ((msmfb->xres * (yoffset + y) + x) * BYTES_PER_PIXEL(msmfb));
mdp->dma(mdp, addr + msmfb->fb->fix.smem_start,
- msmfb->xres * 2, w, h, x, y, &msmfb->dma_callback,
+ msmfb->xres * BYTES_PER_PIXEL(msmfb), w, h, x, y,
+ &msmfb->dma_callback,
panel->interface_type);
return 0;
error:
@@ -323,14 +327,46 @@ error:
static int msmfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
+ u32 size;
+
if ((var->xres != info->var.xres) ||
(var->yres != info->var.yres) ||
- (var->xres_virtual != info->var.xres_virtual) ||
- (var->yres_virtual != info->var.yres_virtual) ||
(var->xoffset != info->var.xoffset) ||
(var->bits_per_pixel != info->var.bits_per_pixel) ||
(var->grayscale != info->var.grayscale))
return -EINVAL;
+
+ size = var->xres_virtual * var->yres_virtual *
+ (var->bits_per_pixel >> 3);
+ if (size > info->fix.smem_len)
+ return -EINVAL;
+ return 0;
+}
+
+static int msmfb_set_par(struct fb_info *info)
+{
+ struct fb_var_screeninfo *var = &info->var;
+ struct fb_fix_screeninfo *fix = &info->fix;
+
+ /* we only support RGB ordering for now */
+ if (var->bits_per_pixel = 32 || var->bits_per_pixel = 24) {
+ var->red.offset = 0;
+ var->red.length = 8;
+ var->green.offset = 8;
+ var->green.length = 8;
+ var->blue.offset = 16;
+ var->blue.length = 8;
+ } else if (var->bits_per_pixel = 16) {
+ var->red.offset = 11;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 6;
+ var->blue.offset = 0;
+ var->blue.length = 5;
+ } else
+ return -1;
+ fix->line_length = var->xres * var->bits_per_pixel / 8;
+
return 0;
}
@@ -427,6 +463,7 @@ static struct fb_ops msmfb_ops = {
.fb_open = msmfb_open,
.fb_release = msmfb_release,
.fb_check_var = msmfb_check_var,
+ .fb_set_par = msmfb_set_par,
.fb_pan_display = msmfb_pan_display,
.fb_fillrect = msmfb_fillrect,
.fb_copyarea = msmfb_copyarea,
@@ -438,8 +475,6 @@ static unsigned PP[16];
-#define BITS_PER_PIXEL 16
-
static void setup_fb_info(struct msmfb_info *msmfb)
{
struct fb_info *fb_info = msmfb->fb;
@@ -462,7 +497,7 @@ static void setup_fb_info(struct msmfb_info *msmfb)
fb_info->var.height = msmfb->panel->fb_data->height;
fb_info->var.xres_virtual = msmfb->xres;
fb_info->var.yres_virtual = msmfb->yres * 2;
- fb_info->var.bits_per_pixel = BITS_PER_PIXEL;
+ fb_info->var.bits_per_pixel = 16;
fb_info->var.accel_flags = 0;
fb_info->var.yoffset = 0;
@@ -497,28 +532,30 @@ static int setup_fbmem(struct msmfb_info *msmfb, struct platform_device *pdev)
struct fb_info *fb = msmfb->fb;
struct resource *resource;
unsigned long size = msmfb->xres * msmfb->yres *
- (BITS_PER_PIXEL >> 3) * 2;
+ BYTES_PER_PIXEL(msmfb) * 2;
+ unsigned long resource_size;
unsigned char *fbram;
/* board file might have attached a resource describing an fb */
resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!resource)
return -EINVAL;
+ resource_size = resource->end - resource->start + 1;
/* check the resource is large enough to fit the fb */
- if (resource->end - resource->start < size) {
- printk(KERN_ERR "allocated resource is too small for "
+ if (resource_size < size) {
+ printk(KERN_ERR "msmfb: allocated resource is too small for "
"fb\n");
return -ENOMEM;
}
fb->fix.smem_start = resource->start;
- fb->fix.smem_len = resource->end - resource->start;
- fbram = ioremap(resource->start,
- resource->end - resource->start);
+ fb->fix.smem_len = resource_size;
+ fbram = ioremap(resource->start, resource_size);
if (fbram = 0) {
printk(KERN_ERR "msmfb: cannot allocate fbram!\n");
return -ENOMEM;
}
+
fb->screen_base = fbram;
return 0;
}
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next prev parent reply other threads:[~2011-03-18 21:56 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-18 21:47 [PATCH 00/20] video: msm: Adding Support for MDP3.1 Carl Vanderlip
2011-03-18 21:51 ` [PATCH 01/20] video: msm: Fix typo 'mpd'->'mdp' Carl Vanderlip
2011-03-21 4:36 ` Janorkar, Mayuresh
2011-03-22 0:08 ` Carl Vanderlip
2011-03-18 21:53 ` [PATCH 02/20] video: msm: add spinlock to mdp_info struct Carl Vanderlip
2011-03-18 21:53 ` [PATCH 03/20] video: msm: add locked_enable_mdp_irq function Carl Vanderlip
2011-03-18 21:54 ` [PATCH 04/20] video: msm: Move clk to mdp_info struct Carl Vanderlip
2011-03-18 21:54 ` [PATCH 05/20] video: msm: Setup framework for multiple output interfaces Carl Vanderlip
2011-03-18 21:55 ` [PATCH 06/20] video: msm: Simplify mdp_blit function Carl Vanderlip
2011-03-18 21:56 ` Carl Vanderlip [this message]
2011-03-21 4:52 ` [PATCH 07/20] video: msm: Allow users to request a larger x and Janorkar, Mayuresh
2011-03-21 16:41 ` [PATCH 07/20] video: msm: Allow users to request a larger x Russell King - ARM Linux
2011-03-22 0:21 ` Carl Vanderlip
2011-03-18 21:56 ` [PATCH 08/20] video: msm: Refactor mdp_regs Carl Vanderlip
2011-03-21 5:29 ` Janorkar, Mayuresh
2011-03-21 17:23 ` Bryan Huntsman
2011-03-21 17:28 ` Brian Swetland
2011-03-18 21:57 ` [PATCH 09/20] video: msm: Split out MDP2.2 HW specific code Carl Vanderlip
2011-03-20 9:22 ` Russell King - ARM Linux
2011-03-22 0:26 ` Carl Vanderlip
2011-03-21 5:27 ` Janorkar, Mayuresh
2011-03-23 13:11 ` Daniel Walker
2011-03-23 19:18 ` Dima Zavin
[not found] ` <4D8A5B44.9050306@codeaurora.org>
2011-03-23 22:47 ` David Brown
2011-03-18 21:57 ` [PATCH 10/20] video: msm: Separate more MDP " Carl Vanderlip
2011-03-18 21:57 ` [PATCH 11/20] video: msm: Add MDP FB DMA configuration Carl Vanderlip
2011-03-21 5:30 ` Janorkar, Mayuresh
2011-03-18 21:58 ` [PATCH 12/20] video: msm: Add IRQ callback for MDP interface Carl Vanderlip
2011-03-18 21:58 ` [PATCH 13/20] video: msm: Debugging for send_blit Carl Vanderlip
2011-03-21 5:32 ` Janorkar, Mayuresh
2011-03-18 21:58 ` [PATCH 14/20] video: msm: Write IRQ mask to MDP registers Carl Vanderlip
2011-03-18 21:59 ` [PATCH 15/20] video: msm: convert printk to pr_* Carl Vanderlip
2011-03-21 5:34 ` Janorkar, Mayuresh
2011-03-21 13:33 ` Sergei Shtylyov
2011-03-18 21:59 ` [PATCH 16/20] video: msm: Set the EBI1 clock to 128MHz when performing blits Carl Vanderlip
2011-03-21 20:31 ` [PATCH 16/20] video: msm: Set the EBI1 clock to 128MHz when performing Stephen Boyd
2011-03-18 21:59 ` [PATCH 17/20] video: msm: Prevent framebuffer glitch during initialization Carl Vanderlip
2011-03-21 13:39 ` Sergei Shtylyov
2011-03-21 23:49 ` [PATCH 17/20] video: msm: Prevent framebuffer glitch Carl Vanderlip
2011-03-18 21:59 ` [PATCH 18/20] video: msm: Prevent DMA lockups when switching bit depths Carl Vanderlip
2011-03-21 13:42 ` [PATCH 18/20] video: msm: Prevent DMA lockups when switching Sergei Shtylyov
2011-03-18 21:59 ` [PATCH 19/20] video: msm: Separate calculation of base and offset Carl Vanderlip
2011-03-18 22:00 ` [PATCH 20/20] video: msm: Add support for MDP 3.1 (qsd8k) Carl Vanderlip
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1300485381-27201-1-git-send-email-carlv@codeaurora.org \
--to=carlv@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).