From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>, Imre Deak <imre.deak@nokia.com>
Subject: [PATCH 6/7] OMAP: H4: Port the display driver to new DSS2
Date: Wed, 04 May 2011 12:27:38 +0000 [thread overview]
Message-ID: <1304512059-10372-7-git-send-email-tomi.valkeinen@ti.com> (raw)
In-Reply-To: <1304512059-10372-1-git-send-email-tomi.valkeinen@ti.com>
Port the old omapfb panel driver to DSS2 and change the board file
accordingly.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Imre Deak <imre.deak@nokia.com>
---
arch/arm/mach-omap2/board-h4.c | 41 +++++---
drivers/video/omap/Makefile | 1 -
drivers/video/omap/lcd_h4.c | 117 ----------------------
drivers/video/omap2/displays/panel-generic-dpi.c | 21 ++++
4 files changed, 46 insertions(+), 134 deletions(-)
delete mode 100644 drivers/video/omap/lcd_h4.c
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index bac7933..991e71e 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -39,6 +39,8 @@
#include <plat/menelaus.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
+#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include "mux.h"
#include "control.h"
@@ -157,17 +159,33 @@ static struct platform_device h4_kp_device = {
},
};
-static struct platform_device h4_lcd_device = {
- .name = "lcd_h4",
- .id = -1,
-};
-
static struct platform_device *h4_devices[] __initdata = {
&h4_flash_device,
&h4_kp_device,
+};
+
+static struct panel_generic_dpi_data h4_panel_data = {
+ .name = "h4",
+};
+
+static struct omap_dss_device h4_lcd_device = {
+ .name = "lcd",
+ .driver_name = "generic_dpi_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 16,
+ .data = &h4_panel_data,
+};
+
+static struct omap_dss_device *h4_dss_devices[] = {
&h4_lcd_device,
};
+static struct omap_dss_board_info h4_dss_data = {
+ .num_devices = ARRAY_SIZE(h4_dss_devices),
+ .devices = h4_dss_devices,
+ .default_device = &h4_lcd_device,
+};
+
/* 2420 Sysboot setup (2430 is different) */
static u32 get_sysboot_value(void)
{
@@ -271,10 +289,6 @@ static void __init h4_init_flash(void)
h4_flash_resource.end = base + SZ_64M - 1;
}
-static struct omap_lcd_config h4_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
-
static struct omap_usb_config h4_usb_config __initdata = {
/* S1.10 OFF -- usb "download port"
* usb0 switched to Mini-B port and isp1105 transceiver;
@@ -286,10 +300,6 @@ static struct omap_usb_config h4_usb_config __initdata = {
.hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */
};
-static struct omap_board_config_kernel h4_config[] __initdata = {
- { OMAP_TAG_LCD, &h4_lcd_config },
-};
-
static void __init omap_h4_init_early(void)
{
omap2_init_common_infrastructure();
@@ -331,9 +341,6 @@ static void __init omap_h4_init(void)
{
omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF);
- omap_board_config = h4_config;
- omap_board_config_size = ARRAY_SIZE(h4_config);
-
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on
@@ -372,6 +379,8 @@ static void __init omap_h4_init(void)
omap2_usbfs_init(&h4_usb_config);
omap_serial_init();
h4_init_flash();
+
+ omap_display_init(&h4_dss_data);
}
static void __init omap_h4_map_io(void)
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index 43eb64a..22fef61 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -17,7 +17,6 @@ objs-y$(CONFIG_FB_OMAP_LCDC_HWA742) += hwa742.o
objs-y$(CONFIG_FB_OMAP_LCDC_BLIZZARD) += blizzard.o
objs-y$(CONFIG_MACH_AMS_DELTA) += lcd_ams_delta.o
-objs-y$(CONFIG_MACH_OMAP_H4) += lcd_h4.o
objs-y$(CONFIG_MACH_OMAP_H3) += lcd_h3.o
objs-y$(CONFIG_MACH_OMAP_PALMTE) += lcd_palmte.o
objs-y$(CONFIG_MACH_OMAP_PALMTT) += lcd_palmtt.o
diff --git a/drivers/video/omap/lcd_h4.c b/drivers/video/omap/lcd_h4.c
deleted file mode 100644
index 03a06a9..0000000
--- a/drivers/video/omap/lcd_h4.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * LCD panel support for the TI OMAP H4 board
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include "omapfb.h"
-
-static int h4_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
-{
- return 0;
-}
-
-static void h4_panel_cleanup(struct lcd_panel *panel)
-{
-}
-
-static int h4_panel_enable(struct lcd_panel *panel)
-{
- return 0;
-}
-
-static void h4_panel_disable(struct lcd_panel *panel)
-{
-}
-
-static unsigned long h4_panel_get_caps(struct lcd_panel *panel)
-{
- return 0;
-}
-
-static struct lcd_panel h4_panel = {
- .name = "h4",
- .config = OMAP_LCDC_PANEL_TFT,
-
- .bpp = 16,
- .data_lines = 16,
- .x_res = 240,
- .y_res = 320,
- .pixel_clock = 6250,
- .hsw = 15,
- .hfp = 15,
- .hbp = 60,
- .vsw = 1,
- .vfp = 1,
- .vbp = 1,
-
- .init = h4_panel_init,
- .cleanup = h4_panel_cleanup,
- .enable = h4_panel_enable,
- .disable = h4_panel_disable,
- .get_caps = h4_panel_get_caps,
-};
-
-static int h4_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&h4_panel);
- return 0;
-}
-
-static int h4_panel_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
-static int h4_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
-{
- return 0;
-}
-
-static int h4_panel_resume(struct platform_device *pdev)
-{
- return 0;
-}
-
-static struct platform_driver h4_panel_driver = {
- .probe = h4_panel_probe,
- .remove = h4_panel_remove,
- .suspend = h4_panel_suspend,
- .resume = h4_panel_resume,
- .driver = {
- .name = "lcd_h4",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init h4_panel_drv_init(void)
-{
- return platform_driver_register(&h4_panel_driver);
-}
-
-static void __exit h4_panel_drv_cleanup(void)
-{
- platform_driver_unregister(&h4_panel_driver);
-}
-
-module_init(h4_panel_drv_init);
-module_exit(h4_panel_drv_cleanup);
-
diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
index 2c1b093..92bf63e 100644
--- a/drivers/video/omap2/displays/panel-generic-dpi.c
+++ b/drivers/video/omap2/displays/panel-generic-dpi.c
@@ -202,6 +202,27 @@ static struct panel_config generic_dpi_panels[] = {
OMAP_DSS_LCD_IHS,
.name = "2430sdp",
},
+
+ /* Unknown panel used in OMAP H4 */
+ {
+ {
+ .x_res = 240,
+ .y_res = 320,
+
+ .pixel_clock = 6250,
+
+ .hsw = 15,
+ .hfp = 15,
+ .hbp = 60,
+
+ .vsw = 1,
+ .vfp = 1,
+ .vbp = 1,
+ },
+ .config = OMAP_DSS_LCD_TFT,
+
+ .name = "h4",
+ },
};
struct panel_drv_data {
--
1.7.4.1
next prev parent reply other threads:[~2011-05-04 12:27 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-04 12:27 [PATCH 0/7] OMAP: DSS: porting old drivers to DSS2 Tomi Valkeinen
2011-05-04 12:27 ` [PATCH 1/7] OMAP: OMAPFB: Remove unused lcd drivers Tomi Valkeinen
2011-05-04 12:44 ` Steve Sakoman
2011-05-04 13:43 ` Koen Kooi
2011-05-04 12:27 ` [PATCH 2/7] OMAP: RX51: Remove unused old omapfb stuff Tomi Valkeinen
2011-05-04 12:27 ` [PATCH 3/7] OMAP: omap3touchbook: Remove unused lcd stuff Tomi Valkeinen
2011-05-04 12:27 ` [PATCH 4/7] OMAP: 2420SDP: Port the display driver to new DSS2 Tomi Valkeinen
2011-05-04 12:27 ` [PATCH 5/7] OMAP: LDP: " Tomi Valkeinen
2011-05-04 12:27 ` Tomi Valkeinen [this message]
2011-05-04 12:27 ` [PATCH 7/7] OMAP: Apollon: " Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1304512059-10372-7-git-send-email-tomi.valkeinen@ti.com \
--to=tomi.valkeinen@ti.com \
--cc=imre.deak@nokia.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).