From: Mythri P K <mythripk@ti.com>
To: linux-fbdev@vger.kernel.org
Subject: [PATCH 4/8] OMAP4: DSS: HDMI: Move the common header file definition
Date: Wed, 22 Jun 2011 11:55:12 +0000 [thread overview]
Message-ID: <1308742996-19230-5-git-send-email-mythripk@ti.com> (raw)
Some of the header file definitions of HDMI IP are needed by audio driver thus
moving the common defintion to more generic Include/video.
Signed-off-by: Mythri P K <mythripk@ti.com>
---
drivers/video/omap2/dss/dss.h | 10 -----
drivers/video/omap2/dss/hdmi.c | 1 +
drivers/video/omap2/dss/hdmi.h | 51 -----------------------
include/video/hdmi_ti_4xxx_ip.h | 84 +++++++++++++++++++++++++++++++++++++++
4 files changed, 85 insertions(+), 61 deletions(-)
create mode 100644 include/video/hdmi_ti_4xxx_ip.h
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index ce17a61..324e982 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -156,16 +156,6 @@ struct dsi_clock_info {
bool use_sys_clk;
};
-/* HDMI PLL structure */
-struct hdmi_pll_info {
- u16 regn;
- u16 regm;
- u32 regmf;
- u16 regm2;
- u16 regsd;
- u16 dcofreq;
-};
-
struct seq_file;
struct platform_device;
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index c24d573..1f34f63 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -33,6 +33,7 @@
#include <linux/pm_runtime.h>
#include <linux/clk.h>
#include <video/omapdss.h>
+#include <video/hdmi_ti_4xxx_ip.h>
#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
#include <sound/soc.h>
diff --git a/drivers/video/omap2/dss/hdmi.h b/drivers/video/omap2/dss/hdmi.h
index dcc30b7..4b0fab3 100644
--- a/drivers/video/omap2/dss/hdmi.h
+++ b/drivers/video/omap2/dss/hdmi.h
@@ -188,39 +188,12 @@ struct hdmi_reg { u16 idx; };
#define REG_GET(base, idx, start, end) \
FLD_GET(hdmi_read_reg(base, idx), start, end)
-struct hdmi_video_timings {
- u16 x_res;
- u16 y_res;
- /* Unit: KHz */
- u32 pixel_clock;
- u16 hsw;
- u16 hfp;
- u16 hbp;
- u16 vsw;
- u16 vfp;
- u16 vbp;
-};
-
-/* HDMI timing structure */
-struct hdmi_timings {
- struct hdmi_video_timings timings;
- int vsync_pol;
- int hsync_pol;
-};
-
enum hdmi_phy_pwr {
HDMI_PHYPWRCMD_OFF = 0,
HDMI_PHYPWRCMD_LDOON = 1,
HDMI_PHYPWRCMD_TXON = 2
};
-enum hdmi_pll_pwr {
- HDMI_PLLPWRCMD_ALLOFF = 0,
- HDMI_PLLPWRCMD_PLLONLY = 1,
- HDMI_PLLPWRCMD_BOTHON_ALLCLKS = 2,
- HDMI_PLLPWRCMD_BOTHON_NOPHYCLK = 3
-};
-
enum hdmi_clk_refsel {
HDMI_REFSEL_PCLK = 0,
HDMI_REFSEL_REF1 = 1,
@@ -256,11 +229,6 @@ enum hdmi_core_packet_mode {
HDMI_PACKETMODE48BITPERPIXEL = 7
};
-enum hdmi_core_hdmi_dvi {
- HDMI_DVI = 0,
- HDMI_HDMI = 1
-};
-
enum hdmi_core_tclkselclkmult {
HDMI_FPLL05IDCK = 0,
HDMI_FPLL10IDCK = 1,
@@ -561,25 +529,6 @@ struct hdmi_video_interface {
int tm; /* Timing mode */
};
-struct hdmi_ip_data {
- void __iomem *base_wp; /* HDMI wrapper */
- unsigned long hdmi_core_sys_offset;
- unsigned long hdmi_core_av_offset;
- unsigned long hdmi_pll_offset;
- unsigned long hdmi_phy_offset;
-};
-
-struct hdmi_cm {
- int code;
- int mode;
-};
-
-struct hdmi_config {
- struct hdmi_timings timings;
- u16 interlace;
- struct hdmi_cm cm;
-};
-
struct hdmi_audio_format {
enum hdmi_stereo_channels stereo_channels;
u8 active_chnnls_msk;
diff --git a/include/video/hdmi_ti_4xxx_ip.h b/include/video/hdmi_ti_4xxx_ip.h
new file mode 100644
index 0000000..49640cd
--- /dev/null
+++ b/include/video/hdmi_ti_4xxx_ip.h
@@ -0,0 +1,84 @@
+/*
+ * hdmi_ti_4xxx_ip.h
+ *
+ * HDMI driver definition for TI OMAP4, TI81xx, TI38xx Processor.
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _HDMI_TI_4xxx_
+#define _HDMI_TI_4xxx_
+
+enum hdmi_pll_pwr {
+ HDMI_PLLPWRCMD_ALLOFF = 0,
+ HDMI_PLLPWRCMD_PLLONLY = 1,
+ HDMI_PLLPWRCMD_BOTHON_ALLCLKS = 2,
+ HDMI_PLLPWRCMD_BOTHON_NOPHYCLK = 3
+};
+
+enum hdmi_core_hdmi_dvi {
+ HDMI_DVI = 0,
+ HDMI_HDMI = 1
+};
+
+struct hdmi_ip_data {
+ void __iomem *base_wp; /* HDMI wrapper */
+ unsigned long hdmi_core_sys_offset;
+ unsigned long hdmi_core_av_offset;
+ unsigned long hdmi_pll_offset;
+ unsigned long hdmi_phy_offset;
+};
+
+struct hdmi_video_timings {
+ u16 x_res;
+ u16 y_res;
+ /* Unit: KHz */
+ u32 pixel_clock;
+ u16 hsw;
+ u16 hfp;
+ u16 hbp;
+ u16 vsw;
+ u16 vfp;
+ u16 vbp;
+};
+
+/* HDMI timing structure */
+struct hdmi_timings {
+ struct hdmi_video_timings timings;
+ int vsync_pol;
+ int hsync_pol;
+};
+
+struct hdmi_cm {
+ int code;
+ int mode;
+};
+
+struct hdmi_config {
+ struct hdmi_timings timings;
+ u16 interlace;
+ struct hdmi_cm cm;
+};
+
+/* HDMI PLL structure */
+struct hdmi_pll_info {
+ u16 regn;
+ u16 regm;
+ u32 regmf;
+ u16 regm2;
+ u16 regsd;
+ u16 dcofreq;
+};
+#endif
--
1.7.5.4
reply other threads:[~2011-06-22 11:55 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1308742996-19230-5-git-send-email-mythripk@ti.com \
--to=mythripk@ti.com \
--cc=linux-fbdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).