From: bernie@plugable.com
To: linux-fbdev@vger.kernel.org
Subject: [PATCH 1/5] udlfb: add more comprehensive support for DPMS FB_BLANK_* modes
Date: Sun, 21 Aug 2011 20:34:12 +0000 [thread overview]
Message-ID: <1313958862-5640-2-git-send-email-bernie@plugable.com> (raw)
In-Reply-To: <1312264472-2900-1-git-send-email-bernie@plugable.com>
From: Bernie Thompson <bernie@plugable.com>
Fixes earlier problems where monitor would not return from blank
Test with any DisplayLink-based USB 2.0 graphics adapter
sudo nano /sys/class/graphics/fb?/blank
and write out single digit FB_BLANK_* code from include/linux/fb.h
Supports on (0), blank (1), suspend (2,3), powerdown (4)
Signed-off-by: Bernie Thompson <bernie@plugable.com>
---
drivers/video/udlfb.c | 97 +++++++++++++++++++++++++++++++++++++------------
include/video/udlfb.h | 1 +
2 files changed, 74 insertions(+), 24 deletions(-)
diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index 4e13375..844b371 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -104,17 +104,39 @@ static char *dlfb_vidreg_unlock(char *buf)
}
/*
- * On/Off for driving the DisplayLink framebuffer to the display
- * 0x00 H and V sync on
- * 0x01 H and V sync off (screen blank but powered)
- * 0x07 DPMS powerdown (requires modeset to come back)
+ * Map FB_BLANK_* to DisplayLink register
+ * DLReg FB_BLANK_*
+ * ----- -----------------------------
+ * 0x00 FB_BLANK_UNBLANK (0)
+ * 0x01 FB_BLANK (1)
+ * 0x03 FB_BLANK_VSYNC_SUSPEND (2)
+ * 0x05 FB_BLANK_HSYNC_SUSPEND (3)
+ * 0x07 FB_BLANK_POWERDOWN (4) Note: requires modeset to come back
*/
-static char *dlfb_enable_hvsync(char *buf, bool enable)
+static char *dlfb_blanking(char *buf, int fb_blank)
{
- if (enable)
- return dlfb_set_register(buf, 0x1F, 0x00);
- else
- return dlfb_set_register(buf, 0x1F, 0x07);
+ u8 reg;
+
+ switch (fb_blank) {
+ case FB_BLANK_POWERDOWN:
+ reg = 0x07;
+ break;
+ case FB_BLANK_HSYNC_SUSPEND:
+ reg = 0x05;
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+ reg = 0x03;
+ break;
+ case FB_BLANK_NORMAL:
+ reg = 0x01;
+ break;
+ default:
+ reg = 0x00;
+ }
+
+ buf = dlfb_set_register(buf, 0x1F, reg);
+
+ return buf;
}
static char *dlfb_set_color_depth(char *buf, u8 selection)
@@ -282,13 +304,15 @@ static int dlfb_set_video_mode(struct dlfb_data *dev,
wrptr = dlfb_set_base8bpp(wrptr, dev->info->fix.smem_len);
wrptr = dlfb_set_vid_cmds(wrptr, var);
- wrptr = dlfb_enable_hvsync(wrptr, true);
+ wrptr = dlfb_blanking(wrptr, FB_BLANK_UNBLANK);
wrptr = dlfb_vidreg_unlock(wrptr);
writesize = wrptr - buf;
retval = dlfb_submit_urb(dev, urb, writesize);
+ dev->blank_mode = FB_BLANK_UNBLANK;
+
return retval;
}
@@ -1049,32 +1073,57 @@ static int dlfb_ops_set_par(struct fb_info *info)
return result;
}
+/* To fonzi the jukebox (e.g. make blanking changes take effect) */
+static char *dlfb_dummy_render(char *buf)
+{
+ *buf++ = 0xAF;
+ *buf++ = 0x6A; /* copy */
+ *buf++ = 0x00; /* from address*/
+ *buf++ = 0x00;
+ *buf++ = 0x00;
+ *buf++ = 0x01; /* one pixel */
+ *buf++ = 0x00; /* to address */
+ *buf++ = 0x00;
+ *buf++ = 0x00;
+ return buf;
+}
+
/*
* In order to come back from full DPMS off, we need to set the mode again
*/
static int dlfb_ops_blank(int blank_mode, struct fb_info *info)
{
struct dlfb_data *dev = info->par;
+ char *bufptr;
+ struct urb *urb;
- if (blank_mode != FB_BLANK_UNBLANK) {
- char *bufptr;
- struct urb *urb;
-
- urb = dlfb_get_urb(dev);
- if (!urb)
- return 0;
+ pr_info("/dev/fb%d FB_BLANK mode %d --> %d\n",
+ info->node, dev->blank_mode, blank_mode);
- bufptr = (char *) urb->transfer_buffer;
- bufptr = dlfb_vidreg_lock(bufptr);
- bufptr = dlfb_enable_hvsync(bufptr, false);
- bufptr = dlfb_vidreg_unlock(bufptr);
+ if ((dev->blank_mode = FB_BLANK_POWERDOWN) &&
+ (blank_mode != FB_BLANK_POWERDOWN)) {
- dlfb_submit_urb(dev, urb, bufptr -
- (char *) urb->transfer_buffer);
- } else {
+ /* returning from powerdown requires a fresh modeset */
dlfb_set_video_mode(dev, &info->var);
}
+ urb = dlfb_get_urb(dev);
+ if (!urb)
+ return 0;
+
+ bufptr = (char *) urb->transfer_buffer;
+ bufptr = dlfb_vidreg_lock(bufptr);
+ bufptr = dlfb_blanking(bufptr, blank_mode);
+ bufptr = dlfb_vidreg_unlock(bufptr);
+
+ /* seems like a render op is needed to have blank change take effect */
+ bufptr = dlfb_dummy_render(bufptr);
+
+ dlfb_submit_urb(dev, urb, bufptr -
+ (char *) urb->transfer_buffer);
+
+ dev->blank_mode = blank_mode;
+
return 0;
}
diff --git a/include/video/udlfb.h b/include/video/udlfb.h
index 69d485a..c41f308 100644
--- a/include/video/udlfb.h
+++ b/include/video/udlfb.h
@@ -50,6 +50,7 @@ struct dlfb_data {
int base16;
int base8;
u32 pseudo_palette[256];
+ int blank_mode; /*one of FB_BLANK_ */
/* blit-only rendering path metrics, exposed through sysfs */
atomic_t bytes_rendered; /* raw pixel-bytes driver asked to render */
atomic_t bytes_identical; /* saved effort with backbuffer comparison */
--
1.7.4.1
prev parent reply other threads:[~2011-08-21 20:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-02 5:54 [PATCH 1/5] udlfb: add more comprehensive support for DPMS FB_BLANK_* modes bernie
2011-08-21 20:34 ` bernie [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1313958862-5640-2-git-send-email-bernie@plugable.com \
--to=bernie@plugable.com \
--cc=linux-fbdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).