* [GIT PULL] OMAP DSS for v3.2
@ 2011-10-07 7:20 Tomi Valkeinen
2011-10-16 21:55 ` Florian Tobias Schandinat
0 siblings, 1 reply; 3+ messages in thread
From: Tomi Valkeinen @ 2011-10-07 7:20 UTC (permalink / raw)
To: Florian Tobias Schandinat; +Cc: linux-omap mailing list, lfbdev-ml
[-- Attachment #1: Type: text/plain, Size: 12624 bytes --]
Hi Florian,
Please pull OMAP DSS patches for v3.2 merge window.
Note that there are some conflicts with other trees. The board file
conflicts are trivial, changes in code which just happen to be next to
each other. The LCD driver conflicts are even simpler, there were
changes to them from some other tree, but I have removed the files.
The conflicts have been solved properly by Stephen in linux-next:
https://github.com/sfrothwell/linux-next/commit/3e31b3042760e3906d0a275d7adedfaf55ee5b0a
I also attached the output from git show, as github seems to show the
full diff for the merge commit.
Are you ok with the conflicts?
Tomi
The following changes since commit b6fd41e29dea9c6753b1843a77e50433e6123bcb:
Linux 3.1-rc6 (2011-09-12 14:02:02 -0700)
are available in the git repository at:
git://gitorious.org/linux-omap-dss2/linux.git for-florian
Andy Doan (1):
OMAPFB: make debug message more useful
Archit Taneja (26):
OMAP: DSS2: DISPC: Prepare dispc_dump_regs() for shortening
OMAP: DSS2: DISPC: Shorten dispc_dump_regs()
OMAP: DSS2: DISPC: dispc_save_context() and dispc_restore_context() cleanup
OMAP: DSS2: DISPC: Shorten _dispc_set_color_conv_coef()
OMAP: DSS2: Use a macro to declare size of the fifo_size array in dispc.c
OMAP: DSS2: Use MIPI DSI enums from include/video/mipi_display.h
OMAP: DSS2: DSI: Represent L4 and VP as sources of VC instead of modes
OMAP: DSS2: Create enum for DSI operation modes
OMAP: DSS2: DSI: Introduce generic write functions
OMAP: DSS2: DSI: Remove functions dsi_vc_dcs_read_1() and dsi_vc_dcs_read_2()
OMAP: DSS2: DSI: Split dsi_vc_dcs_read() into 2 functions
OMAP: DSS2: DSI: Introduce generic read functions
OMAP: DSS2: Clean up stallmode and io pad mode selection
OMAP: DSS2: Create an enum for DSI pixel formats
OMAP: DSS2: DSI: Send zero length packet in dsi_vc_send_null()
OMAP: DSS2: DSI Video mode support
OMAPDSS: DISPC: Reduce the number of arguments in dispc_ovl_setup()
OMAPDSS: DISPC: Pass overlay params as arguments to dispc_ovl_setup()
OMAPDSS: DISPC: Create helper function dispc_mgr_is_lcd()
OMAPDSS: DISPC: Get correct pixel clock for TV manager
OMAPDSS: DISPC: Remove hardcoded use of PPL in five tap clock calculation
OMAPDSS: DISPC: Clean up scaling related clock and five tap calculations
OMAPDSS: FEATURES: Create a range param to get max downscaling
OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha compatibility setting
OMAPDSS: DISPC: VIDEO3 pipeline support
OMAPDSS: DISPC: zorder support for DSS overlays
Arnd Bergmann (1):
video/omap: fix build dependencies
Daniel Morsing (1):
OMAP: DSS2: Don't allow moving managers away from enabled displays
Dima Zavin (1):
OMAP: DSS: dispc: enable/disable clocks in error handler
Mayuresh Janorkar (1):
OMAP: DSS2: Add picodlp panel driver
Mythri P K (14):
OMAP4: DSS2: HDMI: HDMI clean up to pass base_address
OMAP4: DSS2: HDMI: Move pll and video configuration
OMAP4: DSS2: HDMI: Use specific HDMI timings structure
OMAP4: DSS2: HDMI: Move HDMI IP independent generic header
OMAP4: DSS2: HDMI: Move the EDID definition from HDMI
OMAP4: DSS2: HDMI: Split the current HDMI driver to move
OMAP4: DSS2: HDMI: Move the HDMI IP dependent audio
OMAP4: DSS2: HDMI: Rename the functions in HDMI IP library
OMAP4: DSS2: HDMI: Function pointer approach to call
OMAP4: DSS2: Rename hdmi_omap4_panel.c to hdmi_panel.c
OMAPDSS: HDMI: Move the comments in avi infoframe
OMAPDSS: HDMI: Replace hdmi_reg struct with u16
OMAPDSS: HDMI: Add missing register definitions
OMAPDSS: HDMI: Add support to dump registers through debugfs
Thomas Weber (2):
OMAP: DSS2: Support for Innolux AT070TN83
OMAP: Devkit8000: Change lcd driver to AT070TN83
Tomi Valkeinen (63):
OMAP: DSS2: PicoDLP: fix error handling in power_on
OMAP: DSS2: check for manager when enabling display
Revert "HACK: OMAP: DSS2: clk hack for OMAP2/3"
Revert "OMAP: DSS2: HDMI: fix hdmi clock name"
OMAP: DSS2: remove unneeded fck enable/disables
OMAP: DSS2: Change DSI device naming
OMAP4: TWL: Add common omapdss supplies
OMAP: DSS2: DSI: Improve dsi_mux_pads parameters
OMAP: DSS2: Implement dsi_mux_pads for OMAP4
OMAP: OMAPFB: make omapfb start even when a display is missing a driver
OMAP: DSS2: fix clock sources on error and uninit
OMAP: DSS2: Handle manager change in apply
OMAP: DSS2: Remove "EXPERIMENTAL" from Kconfig
OMAP: DSS2: Remove support for non-DISPC overlays
OMAP: DSS2: DISPC: use lookup tables for bit shifts
OMAP: DSS2: Add overlay caps to DSS features
OMAP: DSS2: Add GLOBAL_ALPHA & PRE_MULT_ALPHA to ovl caps
OMAP: DSS2: string parsing cleanups
OMAP: OMAPFB: string parsing cleanups
OMAP: DSS2: DISPC: remove non-existing func prototypes
OMAP: DSS2: DISPC: rename overlay related funcs
OMAP: DSS2: DISPC: rename manager related funcs
OMAP: DSS2: reorganize functions in dss.h
OMAP: DSS2: DISPC: Fix minimum PCD value
OMAP: DSS2: HDMI: use default dividers
OMAP: DSS2: HDMI: change regn definition
OMAP: DSS2: DSI: Add comment about regn
OMAP: DSS2: DISPC: Add missing IRQ definitions
OMAP: DSS2: add dss_get_hdmi_venc_clk_source()
OMAP: DSS2: DISPC: improve dispc_mgr_enable_digit_out()
OMAP: DSS2: HDMI: improve hdmi output enable
OMAP: DSS2: add read_edid() to omap_dss_driver struct
OMAP: DSS2: add detect() to omap_dss_driver struct
OMAP: DSS2: HDMI: make set_timing saner
OMAP: DSS2: HDMI: implement read_edid()
OMAP: DSS2: HDMI: remove edid parsing
OMAP: DSS2: HDMI: split hdmi_core_ddc_edid
OMAP: DSS2: HDMI: clean up edid reading & fix checksum
OMAP: DSS2: HDMI: remove error prints in check_timings
OMAP: DSS2: HDMI: implement detect()
OMAP: DSS2: add panel-dvi driver
OMAP: use dvi panel driver instead of generic-dpi
OMAP: stalker: Remove LCD device from board file
OMAP: DSS2: panel-generic-dpi: remove "generic" panel
OMAP: Add DDC i2c_bus_num to board files
OMAPFB: find best mode from edid
OMAPDSS: Taal: remove external backlight support
OMAPFB: Remove unused lcd drivers
OMAPDSS: Port 2430sdp display driver to DSS2
OMAPDSS: Port the H4 display driver to DSS2
OMAPDSS: Port the Apollon display driver to DSS2
OMAPDSS: Add N800 panel driver
OMAPDSS: remove vaddr from overlay info
OMAP: 4430SDP: Remove unneeded lcd config
OMAP4: 4430SDP: Add panel support to board file
OMAP4: 4430SDP: Add picodlp support to board file
OMAP: RX51: Remove unused old omapfb stuff
OMAP: omap3touchbook: Remove unused lcd stuff
OMAP: 2420SDP: Port the display driver to new DSS2
OMAP: LDP: Port the display driver to new DSS2
OMAP: H4: Port the display driver to new DSS2
OMAP: Apollon: Port the display driver to new DSS2
OMAPDSS: picodlp: add missing #include <linux/module.h>
arch/arm/mach-omap2/board-2430sdp.c | 78 +-
arch/arm/mach-omap2/board-3430sdp.c | 7 +-
arch/arm/mach-omap2/board-4430sdp.c | 208 +++-
arch/arm/mach-omap2/board-am3517evm.c | 6 +-
arch/arm/mach-omap2/board-apollon.c | 35 +-
arch/arm/mach-omap2/board-cm-t35.c | 6 +-
arch/arm/mach-omap2/board-devkit8000.c | 10 +-
arch/arm/mach-omap2/board-h4.c | 42 +-
arch/arm/mach-omap2/board-igep0020.c | 8 +-
arch/arm/mach-omap2/board-ldp.c | 123 ++-
arch/arm/mach-omap2/board-omap3beagle.c | 8 +-
arch/arm/mach-omap2/board-omap3evm.c | 7 +-
arch/arm/mach-omap2/board-omap3pandora.c | 2 +-
arch/arm/mach-omap2/board-omap3stalker.c | 40 +-
arch/arm/mach-omap2/board-omap3touchbook.c | 18 -
arch/arm/mach-omap2/board-omap4panda.c | 8 +-
arch/arm/mach-omap2/board-overo.c | 7 +-
arch/arm/mach-omap2/board-rx51.c | 25 -
arch/arm/mach-omap2/display.c | 60 +-
arch/arm/mach-omap2/twl-common.c | 11 +-
drivers/media/video/omap/omap_vout.c | 18 +-
drivers/video/omap/Kconfig | 29 -
drivers/video/omap/Makefile | 8 -
drivers/video/omap/lcd_2430sdp.c | 203 ---
drivers/video/omap/lcd_apollon.c | 136 --
drivers/video/omap/lcd_h4.c | 117 --
drivers/video/omap/lcd_ldp.c | 201 ---
drivers/video/omap/lcd_omap3beagle.c | 130 --
drivers/video/omap/lcd_omap3evm.c | 193 ---
drivers/video/omap/lcd_overo.c | 180 ---
drivers/video/omap2/displays/Kconfig | 28 +-
drivers/video/omap2/displays/Makefile | 3 +
drivers/video/omap2/displays/panel-dvi.c | 363 +++++
drivers/video/omap2/displays/panel-generic-dpi.c | 113 +-
drivers/video/omap2/displays/panel-n8x0.c | 747 +++++++++
drivers/video/omap2/displays/panel-picodlp.c | 594 +++++++
drivers/video/omap2/displays/panel-picodlp.h | 288 ++++
drivers/video/omap2/displays/panel-taal.c | 123 +-
drivers/video/omap2/dss/Kconfig | 2 +-
drivers/video/omap2/dss/Makefile | 2 +-
drivers/video/omap2/dss/core.c | 4 +
drivers/video/omap2/dss/dispc.c | 1700 ++++++++------------
drivers/video/omap2/dss/dispc.h | 57 +
drivers/video/omap2/dss/display.c | 31 +-
drivers/video/omap2/dss/dpi.c | 28 +-
drivers/video/omap2/dss/dsi.c | 929 +++++++-----
drivers/video/omap2/dss/dss.c | 18 +-
drivers/video/omap2/dss/dss.h | 156 +-
drivers/video/omap2/dss/dss_features.c | 130 ++-
drivers/video/omap2/dss/dss_features.h | 17 +-
drivers/video/omap2/dss/hdmi.c | 1260 ++-------------
.../omap2/dss/{hdmi_omap4_panel.c => hdmi_panel.c} | 68 +-
drivers/video/omap2/dss/manager.c | 191 +--
drivers/video/omap2/dss/overlay.c | 122 +-
drivers/video/omap2/dss/rfbi.c | 45 +-
drivers/video/omap2/dss/sdi.c | 19 +-
drivers/video/omap2/dss/ti_hdmi.h | 138 ++
drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 1239 ++++++++++++++
.../video/omap2/dss/{hdmi.h => ti_hdmi_4xxx_ip.h} | 400 +++---
drivers/video/omap2/dss/venc.c | 27 +-
drivers/video/omap2/omapfb/Kconfig | 2 +-
drivers/video/omap2/omapfb/omapfb-main.c | 134 ++-
drivers/video/omap2/omapfb/omapfb-sysfs.c | 6 +-
include/video/omap-panel-dvi.h | 37 +
include/video/omap-panel-n8x0.h | 15 +
include/video/omap-panel-nokia-dsi.h | 8 +-
include/video/omap-panel-picodlp.h | 23 +
include/video/omapdss.h | 100 +-
68 files changed, 6495 insertions(+), 4596 deletions(-)
delete mode 100644 drivers/video/omap/lcd_2430sdp.c
delete mode 100644 drivers/video/omap/lcd_apollon.c
delete mode 100644 drivers/video/omap/lcd_h4.c
delete mode 100644 drivers/video/omap/lcd_ldp.c
delete mode 100644 drivers/video/omap/lcd_omap3beagle.c
delete mode 100644 drivers/video/omap/lcd_omap3evm.c
delete mode 100644 drivers/video/omap/lcd_overo.c
create mode 100644 drivers/video/omap2/displays/panel-dvi.c
create mode 100644 drivers/video/omap2/displays/panel-n8x0.c
create mode 100644 drivers/video/omap2/displays/panel-picodlp.c
create mode 100644 drivers/video/omap2/displays/panel-picodlp.h
rename drivers/video/omap2/dss/{hdmi_omap4_panel.c => hdmi_panel.c} (79%)
create mode 100644 drivers/video/omap2/dss/ti_hdmi.h
create mode 100644 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
rename drivers/video/omap2/dss/{hdmi.h => ti_hdmi_4xxx_ip.h} (54%)
create mode 100644 include/video/omap-panel-dvi.h
create mode 100644 include/video/omap-panel-n8x0.h
create mode 100644 include/video/omap-panel-picodlp.h
[-- Attachment #2: merge.txt --]
[-- Type: text/plain, Size: 9437 bytes --]
commit 3e31b3042760e3906d0a275d7adedfaf55ee5b0a
Merge: 49d6b1b 3e28189
Author: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Fri Oct 7 14:12:41 2011 +1100
Merge remote-tracking branch 'omap_dss2/for-next'
Conflicts:
arch/arm/mach-omap2/board-2430sdp.c
arch/arm/mach-omap2/board-4430sdp.c
arch/arm/mach-omap2/board-apollon.c
arch/arm/mach-omap2/board-h4.c
arch/arm/mach-omap2/board-ldp.c
arch/arm/mach-omap2/board-rx51.c
drivers/video/omap/lcd_apollon.c
drivers/video/omap/lcd_ldp.c
drivers/video/omap/lcd_overo.c
diff --cc arch/arm/mach-omap2/board-2430sdp.c
index 4191743,6ab6350..ba7d92b
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@@ -137,10 -192,12 +192,6 @@@ static inline void board_smc91x_init(vo
#endif
- static struct omap_board_config_kernel sdp2430_config[] __initdata = {
- {OMAP_TAG_LCD, &sdp2430_lcd_config},
- };
-
-static void __init omap_2430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
diff --cc arch/arm/mach-omap2/board-4430sdp.c
index f3917b3,d3874a6..4d0c8b9
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@@ -381,14 -379,12 +379,6 @@@ static struct platform_device *sdp4430_
&sdp4430_vbat,
};
- static struct omap_lcd_config sdp4430_lcd_config __initdata = {
- .ctrl_name = "internal",
- };
-
- static struct omap_board_config_kernel sdp4430_config[] __initdata = {
- { OMAP_TAG_LCD, &sdp4430_lcd_config },
- };
-
-static void __init omap_4430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_UTMI,
.mode = MUSB_OTG,
diff --cc arch/arm/mach-omap2/board-apollon.c
index 868d5f0,d8eb81e..66f3842
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@@ -265,14 -262,34 +262,28 @@@ static struct omap_usb_config apollon_u
.pins[0] = 6,
};
- static struct omap_lcd_config apollon_lcd_config __initdata = {
- .ctrl_name = "internal",
+ static struct panel_generic_dpi_data apollon_panel_data = {
+ .name = "apollon",
};
- static struct omap_board_config_kernel apollon_config[] __initdata = {
- { OMAP_TAG_LCD, &apollon_lcd_config },
+ static struct omap_dss_device apollon_lcd_device = {
+ .name = "lcd",
+ .driver_name = "generic_dpi_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 18,
+ .data = &apollon_panel_data,
+ };
+
+ static struct omap_dss_device *apollon_dss_devices[] = {
+ &apollon_lcd_device,
+ };
+
+ static struct omap_dss_board_info apollon_dss_data = {
+ .num_devices = ARRAY_SIZE(apollon_dss_devices),
+ .devices = apollon_dss_devices,
+ .default_device = &apollon_lcd_device,
};
-static void __init omap_apollon_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct gpio apollon_gpio_leds[] __initdata = {
{ LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */
{ LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6 */
@@@ -334,7 -349,8 +343,9 @@@ static void __init omap_apollon_init(vo
*/
platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
+
+ omap_display_init(&apollon_dss_data);
}
static void __init omap_apollon_map_io(void)
diff --cc arch/arm/mach-omap2/board-h4.c
index f0ddc27,f7c09de..ba81484
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@@ -285,10 -301,12 +300,6 @@@ static struct omap_usb_config h4_usb_co
.hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */
};
- static struct omap_board_config_kernel h4_config[] __initdata = {
- { OMAP_TAG_LCD, &h4_lcd_config },
- };
-
-static void __init omap_h4_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static void __init omap_h4_init_irq(void)
{
omap2_init_irq();
@@@ -364,8 -379,9 +372,10 @@@ static void __init omap_h4_init(void
platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
omap2_usbfs_init(&h4_usb_config);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
h4_init_flash();
+
+ omap_display_init(&h4_dss_data);
}
static void __init omap_h4_map_io(void)
diff --cc arch/arm/mach-omap2/board-ldp.c
index 5797917,689ed49..e179da0
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@@ -179,19 -183,103 +183,97 @@@ static inline void __init ldp_init_smsc
gpmc_smsc911x_init(&smsc911x_cfg);
}
- static struct platform_device ldp_lcd_device = {
- .name = "ldp_lcd",
- .id = -1,
+ /* LCD */
+
+ static int ldp_backlight_gpio;
+ static int ldp_lcd_enable_gpio;
+
+ #define LCD_PANEL_RESET_GPIO 55
+ #define LCD_PANEL_QVGA_GPIO 56
+
+ static int ldp_panel_enable_lcd(struct omap_dss_device *dssdev)
+ {
+ if (gpio_is_valid(ldp_lcd_enable_gpio))
+ gpio_direction_output(ldp_lcd_enable_gpio, 1);
+ if (gpio_is_valid(ldp_backlight_gpio))
+ gpio_direction_output(ldp_backlight_gpio, 1);
+
+ return 0;
+ }
+
+ static void ldp_panel_disable_lcd(struct omap_dss_device *dssdev)
+ {
+ if (gpio_is_valid(ldp_lcd_enable_gpio))
+ gpio_direction_output(ldp_lcd_enable_gpio, 0);
+ if (gpio_is_valid(ldp_backlight_gpio))
+ gpio_direction_output(ldp_backlight_gpio, 0);
+ }
+
+ static struct panel_generic_dpi_data ldp_panel_data = {
+ .name = "nec_nl2432dr22-11b",
+ .platform_enable = ldp_panel_enable_lcd,
+ .platform_disable = ldp_panel_disable_lcd,
};
- static struct omap_lcd_config ldp_lcd_config __initdata = {
- .ctrl_name = "internal",
+ static struct omap_dss_device ldp_lcd_device = {
+ .name = "lcd",
+ .driver_name = "generic_dpi_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 18,
+ .data = &ldp_panel_data,
+ };
+
+ static struct omap_dss_device *ldp_dss_devices[] = {
+ &ldp_lcd_device,
};
- static struct omap_board_config_kernel ldp_config[] __initdata = {
- { OMAP_TAG_LCD, &ldp_lcd_config },
+ static struct omap_dss_board_info ldp_dss_data = {
+ .num_devices = ARRAY_SIZE(ldp_dss_devices),
+ .devices = ldp_dss_devices,
+ .default_device = &ldp_lcd_device,
};
+ static void __init ldp_display_init(void)
+ {
+ int r;
+
+ static struct gpio gpios[] __initdata = {
+ {LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
+ {LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
+ };
+
+ r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
+ if (r) {
+ pr_err("Cannot request LCD GPIOs, error %d\n", r);
+ return;
+ }
+
+ omap_display_init(&ldp_dss_data);
+ }
+
-static void __init omap_ldp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
+ static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
+ {
+ int r;
+
+ struct gpio gpios[] = {
+ {gpio + 7 , GPIOF_OUT_INIT_LOW, "LCD ENABLE"},
+ {gpio + 15, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT"},
+ };
+
+ r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
+ if (r) {
+ pr_err("Cannot request LCD GPIOs, error %d\n", r);
+ ldp_backlight_gpio = -EINVAL;
+ ldp_lcd_enable_gpio = -EINVAL;
+ return r;
+ }
+
+ ldp_backlight_gpio = gpio + 15;
+ ldp_lcd_enable_gpio = gpio + 7;
+
+ return 0;
+ }
+
static struct twl4030_gpio_platform_data ldp_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
diff --cc arch/arm/mach-omap2/board-rx51.c
index e2e958a,9e7dde6..34858c8
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@@ -79,29 -79,15 +79,6 @@@ static struct cpuidle_params rx51_cpuid
{7505 + 15274, 484329, 1},
};
- static struct omap_lcd_config rx51_lcd_config = {
- .ctrl_name = "internal",
- };
-
- static struct omap_fbmem_config rx51_fbmem0_config = {
- .size = 752 * 1024,
- };
-
- static struct omap_fbmem_config rx51_fbmem1_config = {
- .size = 752 * 1024,
- };
-
- static struct omap_fbmem_config rx51_fbmem2_config = {
- .size = 752 * 1024,
- };
-
- static struct omap_board_config_kernel rx51_config[] = {
- { OMAP_TAG_FBMEM, &rx51_fbmem0_config },
- { OMAP_TAG_FBMEM, &rx51_fbmem1_config },
- { OMAP_TAG_FBMEM, &rx51_fbmem2_config },
- { OMAP_TAG_LCD, &rx51_lcd_config },
- };
-
-static void __init rx51_init_early(void)
-{
- struct omap_sdrc_params *sdrc_params;
-
- omap2_init_common_infrastructure();
- sdrc_params = nokia_get_sdram_timings();
- omap2_init_common_devices(sdrc_params, sdrc_params);
-}
-
extern void __init rx51_peripherals_init(void);
#ifdef CONFIG_OMAP_MUX
@@@ -118,17 -104,9 +95,15 @@@ static struct omap_musb_board_data musb
static void __init rx51_init(void)
{
+ struct omap_sdrc_params *sdrc_params;
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap_board_config = rx51_config;
- omap_board_config_size = ARRAY_SIZE(rx51_config);
omap3_pm_init_cpuidle(rx51_cpuidle_params);
omap_serial_init();
+
+ sdrc_params = nokia_get_sdram_timings();
+ omap_sdrc_init(sdrc_params, sdrc_params);
+
usb_musb_init(&musb_board_data);
rx51_peripherals_init();
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [GIT PULL] OMAP DSS for v3.2
2011-10-07 7:20 [GIT PULL] OMAP DSS for v3.2 Tomi Valkeinen
@ 2011-10-16 21:55 ` Florian Tobias Schandinat
2011-10-17 6:49 ` Tomi Valkeinen
0 siblings, 1 reply; 3+ messages in thread
From: Florian Tobias Schandinat @ 2011-10-16 21:55 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap mailing list, lfbdev-ml
Hi Tomi,
On 10/07/2011 07:20 AM, Tomi Valkeinen wrote:
> Hi Florian,
>
> Please pull OMAP DSS patches for v3.2 merge window.
Pulled.
> Note that there are some conflicts with other trees. The board file
> conflicts are trivial, changes in code which just happen to be next to
> each other. The LCD driver conflicts are even simpler, there were
> changes to them from some other tree, but I have removed the files.
>
> The conflicts have been solved properly by Stephen in linux-next:
>
> https://github.com/sfrothwell/linux-next/commit/3e31b3042760e3906d0a275d7adedfaf55ee5b0a
>
> I also attached the output from git show, as github seems to show the
> full diff for the merge commit.
>
> Are you ok with the conflicts?
No problem.
Well, as I understand, Linus prefers to see (and solve) these conflicts himself,
so I don't have any work with them at all. I'd only have to resolve them if
Linus gave up and that would probably point to a more fundamental issue in the
workflow, like changes going mainline via the wrong tree or such things.
Thanks,
Florian Tobias Schandinat
> The following changes since commit b6fd41e29dea9c6753b1843a77e50433e6123bcb:
>
> Linux 3.1-rc6 (2011-09-12 14:02:02 -0700)
>
> are available in the git repository at:
> git://gitorious.org/linux-omap-dss2/linux.git for-florian
>
> Andy Doan (1):
> OMAPFB: make debug message more useful
>
> Archit Taneja (26):
> OMAP: DSS2: DISPC: Prepare dispc_dump_regs() for shortening
> OMAP: DSS2: DISPC: Shorten dispc_dump_regs()
> OMAP: DSS2: DISPC: dispc_save_context() and dispc_restore_context() cleanup
> OMAP: DSS2: DISPC: Shorten _dispc_set_color_conv_coef()
> OMAP: DSS2: Use a macro to declare size of the fifo_size array in dispc.c
> OMAP: DSS2: Use MIPI DSI enums from include/video/mipi_display.h
> OMAP: DSS2: DSI: Represent L4 and VP as sources of VC instead of modes
> OMAP: DSS2: Create enum for DSI operation modes
> OMAP: DSS2: DSI: Introduce generic write functions
> OMAP: DSS2: DSI: Remove functions dsi_vc_dcs_read_1() and dsi_vc_dcs_read_2()
> OMAP: DSS2: DSI: Split dsi_vc_dcs_read() into 2 functions
> OMAP: DSS2: DSI: Introduce generic read functions
> OMAP: DSS2: Clean up stallmode and io pad mode selection
> OMAP: DSS2: Create an enum for DSI pixel formats
> OMAP: DSS2: DSI: Send zero length packet in dsi_vc_send_null()
> OMAP: DSS2: DSI Video mode support
> OMAPDSS: DISPC: Reduce the number of arguments in dispc_ovl_setup()
> OMAPDSS: DISPC: Pass overlay params as arguments to dispc_ovl_setup()
> OMAPDSS: DISPC: Create helper function dispc_mgr_is_lcd()
> OMAPDSS: DISPC: Get correct pixel clock for TV manager
> OMAPDSS: DISPC: Remove hardcoded use of PPL in five tap clock calculation
> OMAPDSS: DISPC: Clean up scaling related clock and five tap calculations
> OMAPDSS: FEATURES: Create a range param to get max downscaling
> OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha compatibility setting
> OMAPDSS: DISPC: VIDEO3 pipeline support
> OMAPDSS: DISPC: zorder support for DSS overlays
>
> Arnd Bergmann (1):
> video/omap: fix build dependencies
>
> Daniel Morsing (1):
> OMAP: DSS2: Don't allow moving managers away from enabled displays
>
> Dima Zavin (1):
> OMAP: DSS: dispc: enable/disable clocks in error handler
>
> Mayuresh Janorkar (1):
> OMAP: DSS2: Add picodlp panel driver
>
> Mythri P K (14):
> OMAP4: DSS2: HDMI: HDMI clean up to pass base_address
> OMAP4: DSS2: HDMI: Move pll and video configuration
> OMAP4: DSS2: HDMI: Use specific HDMI timings structure
> OMAP4: DSS2: HDMI: Move HDMI IP independent generic header
> OMAP4: DSS2: HDMI: Move the EDID definition from HDMI
> OMAP4: DSS2: HDMI: Split the current HDMI driver to move
> OMAP4: DSS2: HDMI: Move the HDMI IP dependent audio
> OMAP4: DSS2: HDMI: Rename the functions in HDMI IP library
> OMAP4: DSS2: HDMI: Function pointer approach to call
> OMAP4: DSS2: Rename hdmi_omap4_panel.c to hdmi_panel.c
> OMAPDSS: HDMI: Move the comments in avi infoframe
> OMAPDSS: HDMI: Replace hdmi_reg struct with u16
> OMAPDSS: HDMI: Add missing register definitions
> OMAPDSS: HDMI: Add support to dump registers through debugfs
>
> Thomas Weber (2):
> OMAP: DSS2: Support for Innolux AT070TN83
> OMAP: Devkit8000: Change lcd driver to AT070TN83
>
> Tomi Valkeinen (63):
> OMAP: DSS2: PicoDLP: fix error handling in power_on
> OMAP: DSS2: check for manager when enabling display
> Revert "HACK: OMAP: DSS2: clk hack for OMAP2/3"
> Revert "OMAP: DSS2: HDMI: fix hdmi clock name"
> OMAP: DSS2: remove unneeded fck enable/disables
> OMAP: DSS2: Change DSI device naming
> OMAP4: TWL: Add common omapdss supplies
> OMAP: DSS2: DSI: Improve dsi_mux_pads parameters
> OMAP: DSS2: Implement dsi_mux_pads for OMAP4
> OMAP: OMAPFB: make omapfb start even when a display is missing a driver
> OMAP: DSS2: fix clock sources on error and uninit
> OMAP: DSS2: Handle manager change in apply
> OMAP: DSS2: Remove "EXPERIMENTAL" from Kconfig
> OMAP: DSS2: Remove support for non-DISPC overlays
> OMAP: DSS2: DISPC: use lookup tables for bit shifts
> OMAP: DSS2: Add overlay caps to DSS features
> OMAP: DSS2: Add GLOBAL_ALPHA & PRE_MULT_ALPHA to ovl caps
> OMAP: DSS2: string parsing cleanups
> OMAP: OMAPFB: string parsing cleanups
> OMAP: DSS2: DISPC: remove non-existing func prototypes
> OMAP: DSS2: DISPC: rename overlay related funcs
> OMAP: DSS2: DISPC: rename manager related funcs
> OMAP: DSS2: reorganize functions in dss.h
> OMAP: DSS2: DISPC: Fix minimum PCD value
> OMAP: DSS2: HDMI: use default dividers
> OMAP: DSS2: HDMI: change regn definition
> OMAP: DSS2: DSI: Add comment about regn
> OMAP: DSS2: DISPC: Add missing IRQ definitions
> OMAP: DSS2: add dss_get_hdmi_venc_clk_source()
> OMAP: DSS2: DISPC: improve dispc_mgr_enable_digit_out()
> OMAP: DSS2: HDMI: improve hdmi output enable
> OMAP: DSS2: add read_edid() to omap_dss_driver struct
> OMAP: DSS2: add detect() to omap_dss_driver struct
> OMAP: DSS2: HDMI: make set_timing saner
> OMAP: DSS2: HDMI: implement read_edid()
> OMAP: DSS2: HDMI: remove edid parsing
> OMAP: DSS2: HDMI: split hdmi_core_ddc_edid
> OMAP: DSS2: HDMI: clean up edid reading & fix checksum
> OMAP: DSS2: HDMI: remove error prints in check_timings
> OMAP: DSS2: HDMI: implement detect()
> OMAP: DSS2: add panel-dvi driver
> OMAP: use dvi panel driver instead of generic-dpi
> OMAP: stalker: Remove LCD device from board file
> OMAP: DSS2: panel-generic-dpi: remove "generic" panel
> OMAP: Add DDC i2c_bus_num to board files
> OMAPFB: find best mode from edid
> OMAPDSS: Taal: remove external backlight support
> OMAPFB: Remove unused lcd drivers
> OMAPDSS: Port 2430sdp display driver to DSS2
> OMAPDSS: Port the H4 display driver to DSS2
> OMAPDSS: Port the Apollon display driver to DSS2
> OMAPDSS: Add N800 panel driver
> OMAPDSS: remove vaddr from overlay info
> OMAP: 4430SDP: Remove unneeded lcd config
> OMAP4: 4430SDP: Add panel support to board file
> OMAP4: 4430SDP: Add picodlp support to board file
> OMAP: RX51: Remove unused old omapfb stuff
> OMAP: omap3touchbook: Remove unused lcd stuff
> OMAP: 2420SDP: Port the display driver to new DSS2
> OMAP: LDP: Port the display driver to new DSS2
> OMAP: H4: Port the display driver to new DSS2
> OMAP: Apollon: Port the display driver to new DSS2
> OMAPDSS: picodlp: add missing #include <linux/module.h>
>
> arch/arm/mach-omap2/board-2430sdp.c | 78 +-
> arch/arm/mach-omap2/board-3430sdp.c | 7 +-
> arch/arm/mach-omap2/board-4430sdp.c | 208 +++-
> arch/arm/mach-omap2/board-am3517evm.c | 6 +-
> arch/arm/mach-omap2/board-apollon.c | 35 +-
> arch/arm/mach-omap2/board-cm-t35.c | 6 +-
> arch/arm/mach-omap2/board-devkit8000.c | 10 +-
> arch/arm/mach-omap2/board-h4.c | 42 +-
> arch/arm/mach-omap2/board-igep0020.c | 8 +-
> arch/arm/mach-omap2/board-ldp.c | 123 ++-
> arch/arm/mach-omap2/board-omap3beagle.c | 8 +-
> arch/arm/mach-omap2/board-omap3evm.c | 7 +-
> arch/arm/mach-omap2/board-omap3pandora.c | 2 +-
> arch/arm/mach-omap2/board-omap3stalker.c | 40 +-
> arch/arm/mach-omap2/board-omap3touchbook.c | 18 -
> arch/arm/mach-omap2/board-omap4panda.c | 8 +-
> arch/arm/mach-omap2/board-overo.c | 7 +-
> arch/arm/mach-omap2/board-rx51.c | 25 -
> arch/arm/mach-omap2/display.c | 60 +-
> arch/arm/mach-omap2/twl-common.c | 11 +-
> drivers/media/video/omap/omap_vout.c | 18 +-
> drivers/video/omap/Kconfig | 29 -
> drivers/video/omap/Makefile | 8 -
> drivers/video/omap/lcd_2430sdp.c | 203 ---
> drivers/video/omap/lcd_apollon.c | 136 --
> drivers/video/omap/lcd_h4.c | 117 --
> drivers/video/omap/lcd_ldp.c | 201 ---
> drivers/video/omap/lcd_omap3beagle.c | 130 --
> drivers/video/omap/lcd_omap3evm.c | 193 ---
> drivers/video/omap/lcd_overo.c | 180 ---
> drivers/video/omap2/displays/Kconfig | 28 +-
> drivers/video/omap2/displays/Makefile | 3 +
> drivers/video/omap2/displays/panel-dvi.c | 363 +++++
> drivers/video/omap2/displays/panel-generic-dpi.c | 113 +-
> drivers/video/omap2/displays/panel-n8x0.c | 747 +++++++++
> drivers/video/omap2/displays/panel-picodlp.c | 594 +++++++
> drivers/video/omap2/displays/panel-picodlp.h | 288 ++++
> drivers/video/omap2/displays/panel-taal.c | 123 +-
> drivers/video/omap2/dss/Kconfig | 2 +-
> drivers/video/omap2/dss/Makefile | 2 +-
> drivers/video/omap2/dss/core.c | 4 +
> drivers/video/omap2/dss/dispc.c | 1700 ++++++++------------
> drivers/video/omap2/dss/dispc.h | 57 +
> drivers/video/omap2/dss/display.c | 31 +-
> drivers/video/omap2/dss/dpi.c | 28 +-
> drivers/video/omap2/dss/dsi.c | 929 +++++++-----
> drivers/video/omap2/dss/dss.c | 18 +-
> drivers/video/omap2/dss/dss.h | 156 +-
> drivers/video/omap2/dss/dss_features.c | 130 ++-
> drivers/video/omap2/dss/dss_features.h | 17 +-
> drivers/video/omap2/dss/hdmi.c | 1260 ++-------------
> .../omap2/dss/{hdmi_omap4_panel.c => hdmi_panel.c} | 68 +-
> drivers/video/omap2/dss/manager.c | 191 +--
> drivers/video/omap2/dss/overlay.c | 122 +-
> drivers/video/omap2/dss/rfbi.c | 45 +-
> drivers/video/omap2/dss/sdi.c | 19 +-
> drivers/video/omap2/dss/ti_hdmi.h | 138 ++
> drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 1239 ++++++++++++++
> .../video/omap2/dss/{hdmi.h => ti_hdmi_4xxx_ip.h} | 400 +++---
> drivers/video/omap2/dss/venc.c | 27 +-
> drivers/video/omap2/omapfb/Kconfig | 2 +-
> drivers/video/omap2/omapfb/omapfb-main.c | 134 ++-
> drivers/video/omap2/omapfb/omapfb-sysfs.c | 6 +-
> include/video/omap-panel-dvi.h | 37 +
> include/video/omap-panel-n8x0.h | 15 +
> include/video/omap-panel-nokia-dsi.h | 8 +-
> include/video/omap-panel-picodlp.h | 23 +
> include/video/omapdss.h | 100 +-
> 68 files changed, 6495 insertions(+), 4596 deletions(-)
> delete mode 100644 drivers/video/omap/lcd_2430sdp.c
> delete mode 100644 drivers/video/omap/lcd_apollon.c
> delete mode 100644 drivers/video/omap/lcd_h4.c
> delete mode 100644 drivers/video/omap/lcd_ldp.c
> delete mode 100644 drivers/video/omap/lcd_omap3beagle.c
> delete mode 100644 drivers/video/omap/lcd_omap3evm.c
> delete mode 100644 drivers/video/omap/lcd_overo.c
> create mode 100644 drivers/video/omap2/displays/panel-dvi.c
> create mode 100644 drivers/video/omap2/displays/panel-n8x0.c
> create mode 100644 drivers/video/omap2/displays/panel-picodlp.c
> create mode 100644 drivers/video/omap2/displays/panel-picodlp.h
> rename drivers/video/omap2/dss/{hdmi_omap4_panel.c => hdmi_panel.c} (79%)
> create mode 100644 drivers/video/omap2/dss/ti_hdmi.h
> create mode 100644 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
> rename drivers/video/omap2/dss/{hdmi.h => ti_hdmi_4xxx_ip.h} (54%)
> create mode 100644 include/video/omap-panel-dvi.h
> create mode 100644 include/video/omap-panel-n8x0.h
> create mode 100644 include/video/omap-panel-picodlp.h
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [GIT PULL] OMAP DSS for v3.2
2011-10-16 21:55 ` Florian Tobias Schandinat
@ 2011-10-17 6:49 ` Tomi Valkeinen
0 siblings, 0 replies; 3+ messages in thread
From: Tomi Valkeinen @ 2011-10-17 6:49 UTC (permalink / raw)
To: Florian Tobias Schandinat; +Cc: linux-omap mailing list, lfbdev-ml
On 10/17/2011 12:55 AM, Florian Tobias Schandinat wrote:
> Hi Tomi,
>
> On 10/07/2011 07:20 AM, Tomi Valkeinen wrote:
>> Hi Florian,
>>
>> Please pull OMAP DSS patches for v3.2 merge window.
>
> Pulled.
Thanks.
>> Note that there are some conflicts with other trees. The board file
>> conflicts are trivial, changes in code which just happen to be next to
>> each other. The LCD driver conflicts are even simpler, there were
>> changes to them from some other tree, but I have removed the files.
>>
>> The conflicts have been solved properly by Stephen in linux-next:
>>
>> https://github.com/sfrothwell/linux-next/commit/3e31b3042760e3906d0a275d7adedfaf55ee5b0a
>>
>> I also attached the output from git show, as github seems to show the
>> full diff for the merge commit.
>>
>> Are you ok with the conflicts?
>
> No problem.
> Well, as I understand, Linus prefers to see (and solve) these conflicts himself,
> so I don't have any work with them at all. I'd only have to resolve them if
> Linus gave up and that would probably point to a more fundamental issue in the
> workflow, like changes going mainline via the wrong tree or such things.
This is also my understanding. However, Linus isn't that fond of ARM
board files, which is where the conflicts are...
One could argue that the board file changes should go through the OMAP
tree, but both the driver and the board files need to be changed at the
same time to keep kernel compiling.
Tomi
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-10-17 6:49 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-10-07 7:20 [GIT PULL] OMAP DSS for v3.2 Tomi Valkeinen
2011-10-16 21:55 ` Florian Tobias Schandinat
2011-10-17 6:49 ` Tomi Valkeinen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).