[PATCHv2] atmel_lcdfb: support new-style palette format

[Peter Korsgaard <jacmet@sunsite.dk>]

The newer Atmel SoCs use normal 16bit 565 BGR/RGB for the palette data,
rather than the special intensity + 555 format.

Fill out palette data correctly on these devices, and at the same time
respect the RGB/BGR wiring mode.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
Changes since v1:
 - ATMEL_LCDC_WIRING_RGB/BGR was swapped

 drivers/video/atmel_lcdfb.c |   32 ++++++++++++++++++++++++--------
 1 files changed, 24 insertions(+), 8 deletions(-)

diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 63409c1..7ca3eaf 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -682,14 +682,30 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
 
 	case FB_VISUAL_PSEUDOCOLOR:
 		if (regno < 256) {
-			val  = ((red   >> 11) & 0x001f);
-			val |= ((green >>  6) & 0x03e0);
-			val |= ((blue  >>  1) & 0x7c00);
-
-			/*
-			 * TODO: intensity bit. Maybe something like
-			 *   ~(red[10] ^ green[10] ^ blue[10]) & 1
-			 */
+			if (cpu_is_at91sam9261() || cpu_is_at91sam9263()
+			    || cpu_is_at91sam9rl()) {
+				/* old style I+BGR:555 */
+				val  = ((red   >> 11) & 0x001f);
+				val |= ((green >>  6) & 0x03e0);
+				val |= ((blue  >>  1) & 0x7c00);
+
+				/*
+				 * TODO: intensity bit. Maybe something like
+				 *   ~(red[10] ^ green[10] ^ blue[10]) & 1
+				 */
+			} else {
+				/* new style BGR:565 / RGB:565 */
+				if (sinfo->lcd_wiring_mode =
+				    ATMEL_LCDC_WIRING_RGB) {
+					val  = ((blue >> 11) & 0x001f);
+					val |= ((red  >>  0) & 0xf800);
+				} else {
+					val  = ((red  >> 11) & 0x001f);
+					val |= ((blue >>  0) & 0xf800);
+				}
+
+				val |= ((green >>  5) & 0x07e0);
+			}
 
 			lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
 			ret = 0;
-- 
1.7.6.3