* [PATCHv2] atmel_lcdfb: support new-style palette format
@ 2011-10-13 14:45 Peter Korsgaard
2011-11-12 0:16 ` Florian Tobias Schandinat
0 siblings, 1 reply; 3+ messages in thread
From: Peter Korsgaard @ 2011-10-13 14:45 UTC (permalink / raw)
To: linux-arm-kernel
The newer Atmel SoCs use normal 16bit 565 BGR/RGB for the palette data,
rather than the special intensity + 555 format.
Fill out palette data correctly on these devices, and at the same time
respect the RGB/BGR wiring mode.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
Changes since v1:
- ATMEL_LCDC_WIRING_RGB/BGR was swapped
drivers/video/atmel_lcdfb.c | 32 ++++++++++++++++++++++++--------
1 files changed, 24 insertions(+), 8 deletions(-)
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 63409c1..7ca3eaf 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -682,14 +682,30 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
case FB_VISUAL_PSEUDOCOLOR:
if (regno < 256) {
- val = ((red >> 11) & 0x001f);
- val |= ((green >> 6) & 0x03e0);
- val |= ((blue >> 1) & 0x7c00);
-
- /*
- * TODO: intensity bit. Maybe something like
- * ~(red[10] ^ green[10] ^ blue[10]) & 1
- */
+ if (cpu_is_at91sam9261() || cpu_is_at91sam9263()
+ || cpu_is_at91sam9rl()) {
+ /* old style I+BGR:555 */
+ val = ((red >> 11) & 0x001f);
+ val |= ((green >> 6) & 0x03e0);
+ val |= ((blue >> 1) & 0x7c00);
+
+ /*
+ * TODO: intensity bit. Maybe something like
+ * ~(red[10] ^ green[10] ^ blue[10]) & 1
+ */
+ } else {
+ /* new style BGR:565 / RGB:565 */
+ if (sinfo->lcd_wiring_mode =
+ ATMEL_LCDC_WIRING_RGB) {
+ val = ((blue >> 11) & 0x001f);
+ val |= ((red >> 0) & 0xf800);
+ } else {
+ val = ((red >> 11) & 0x001f);
+ val |= ((blue >> 0) & 0xf800);
+ }
+
+ val |= ((green >> 5) & 0x07e0);
+ }
lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
ret = 0;
--
1.7.6.3
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCHv2] atmel_lcdfb: support new-style palette format
2011-10-13 14:45 [PATCHv2] atmel_lcdfb: support new-style palette format Peter Korsgaard
@ 2011-11-12 0:16 ` Florian Tobias Schandinat
2012-01-09 13:34 ` Nicolas Ferre
0 siblings, 1 reply; 3+ messages in thread
From: Florian Tobias Schandinat @ 2011-11-12 0:16 UTC (permalink / raw)
To: linux-arm-kernel
On 10/13/2011 02:45 PM, Peter Korsgaard wrote:
> The newer Atmel SoCs use normal 16bit 565 BGR/RGB for the palette data,
> rather than the special intensity + 555 format.
>
> Fill out palette data correctly on these devices, and at the same time
> respect the RGB/BGR wiring mode.
Applied this patch.
Thanks,
Florian Tobias Schandinat
>
> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
> ---
> Changes since v1:
> - ATMEL_LCDC_WIRING_RGB/BGR was swapped
>
> drivers/video/atmel_lcdfb.c | 32 ++++++++++++++++++++++++--------
> 1 files changed, 24 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
> index 63409c1..7ca3eaf 100644
> --- a/drivers/video/atmel_lcdfb.c
> +++ b/drivers/video/atmel_lcdfb.c
> @@ -682,14 +682,30 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
>
> case FB_VISUAL_PSEUDOCOLOR:
> if (regno < 256) {
> - val = ((red >> 11) & 0x001f);
> - val |= ((green >> 6) & 0x03e0);
> - val |= ((blue >> 1) & 0x7c00);
> -
> - /*
> - * TODO: intensity bit. Maybe something like
> - * ~(red[10] ^ green[10] ^ blue[10]) & 1
> - */
> + if (cpu_is_at91sam9261() || cpu_is_at91sam9263()
> + || cpu_is_at91sam9rl()) {
> + /* old style I+BGR:555 */
> + val = ((red >> 11) & 0x001f);
> + val |= ((green >> 6) & 0x03e0);
> + val |= ((blue >> 1) & 0x7c00);
> +
> + /*
> + * TODO: intensity bit. Maybe something like
> + * ~(red[10] ^ green[10] ^ blue[10]) & 1
> + */
> + } else {
> + /* new style BGR:565 / RGB:565 */
> + if (sinfo->lcd_wiring_mode =
> + ATMEL_LCDC_WIRING_RGB) {
> + val = ((blue >> 11) & 0x001f);
> + val |= ((red >> 0) & 0xf800);
> + } else {
> + val = ((red >> 11) & 0x001f);
> + val |= ((blue >> 0) & 0xf800);
> + }
> +
> + val |= ((green >> 5) & 0x07e0);
> + }
>
> lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
> ret = 0;
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCHv2] atmel_lcdfb: support new-style palette format
2011-11-12 0:16 ` Florian Tobias Schandinat
@ 2012-01-09 13:34 ` Nicolas Ferre
0 siblings, 0 replies; 3+ messages in thread
From: Nicolas Ferre @ 2012-01-09 13:34 UTC (permalink / raw)
To: linux-arm-kernel
On 11/12/2011 01:16 AM, Florian Tobias Schandinat :
> On 10/13/2011 02:45 PM, Peter Korsgaard wrote:
>> The newer Atmel SoCs use normal 16bit 565 BGR/RGB for the palette data,
>> rather than the special intensity + 555 format.
>>
>> Fill out palette data correctly on these devices, and at the same time
>> respect the RGB/BGR wiring mode.
>
> Applied this patch.
>
>
> Thanks,
>
> Florian Tobias Schandinat
Florian, here is my:
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Can you please send it upstream through your tree?
>> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
>> ---
>> Changes since v1:
>> - ATMEL_LCDC_WIRING_RGB/BGR was swapped
>>
>> drivers/video/atmel_lcdfb.c | 32 ++++++++++++++++++++++++--------
>> 1 files changed, 24 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
>> index 63409c1..7ca3eaf 100644
>> --- a/drivers/video/atmel_lcdfb.c
>> +++ b/drivers/video/atmel_lcdfb.c
>> @@ -682,14 +682,30 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
>>
>> case FB_VISUAL_PSEUDOCOLOR:
>> if (regno < 256) {
>> - val = ((red >> 11) & 0x001f);
>> - val |= ((green >> 6) & 0x03e0);
>> - val |= ((blue >> 1) & 0x7c00);
>> -
>> - /*
>> - * TODO: intensity bit. Maybe something like
>> - * ~(red[10] ^ green[10] ^ blue[10]) & 1
>> - */
>> + if (cpu_is_at91sam9261() || cpu_is_at91sam9263()
>> + || cpu_is_at91sam9rl()) {
>> + /* old style I+BGR:555 */
>> + val = ((red >> 11) & 0x001f);
>> + val |= ((green >> 6) & 0x03e0);
>> + val |= ((blue >> 1) & 0x7c00);
>> +
>> + /*
>> + * TODO: intensity bit. Maybe something like
>> + * ~(red[10] ^ green[10] ^ blue[10]) & 1
>> + */
>> + } else {
>> + /* new style BGR:565 / RGB:565 */
>> + if (sinfo->lcd_wiring_mode =
>> + ATMEL_LCDC_WIRING_RGB) {
>> + val = ((blue >> 11) & 0x001f);
>> + val |= ((red >> 0) & 0xf800);
>> + } else {
>> + val = ((red >> 11) & 0x001f);
>> + val |= ((blue >> 0) & 0xf800);
>> + }
>> +
>> + val |= ((green >> 5) & 0x07e0);
>> + }
>>
>> lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
>> ret = 0;
>
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-01-09 13:34 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-10-13 14:45 [PATCHv2] atmel_lcdfb: support new-style palette format Peter Korsgaard
2011-11-12 0:16 ` Florian Tobias Schandinat
2012-01-09 13:34 ` Nicolas Ferre
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).