From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jingoo Han Date: Tue, 29 Nov 2011 09:48:25 +0000 Subject: [PATCH] video: s3c2410: fix checkpatch error and warnings Message-Id: <1322560105-32652-1-git-send-email-jg1.han@samsung.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-fbdev@vger.kernel.org This patch fixes the checkpatch errors listed below: ERROR: do not initialise statics to 0 or NULL WARNING: Use #include instead of WARNING: braces {} are not necessary for single statement blocks WARNING: braces {} are not necessary for any arm of this statement WARNING: static char array declaration should probably be static const char WARNING: line over 80 characters WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt Signed-off-by: Jingoo Han --- drivers/video/s3c2410fb.c | 29 +++++++++++++++-------------- 1 files changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index ee4c0df..77f34c6 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c @@ -26,8 +26,8 @@ #include #include #include +#include -#include #include #include @@ -45,10 +45,10 @@ #ifdef CONFIG_FB_S3C2410_DEBUG static int debug = 1; #else -static int debug = 0; +static int debug; #endif -#define dprintk(msg...) if (debug) { printk(KERN_DEBUG "s3c2410fb: " msg); } +#define dprintk(msg...) if (debug) printk(KERN_DEBUG "s3c2410fb: " msg); /* useful functions */ @@ -567,11 +567,10 @@ static int s3c2410fb_blank(int blank_mode, struct fb_info *info) tpal_reg += is_s3c2412(fbi) ? S3C2412_TPAL : S3C2410_TPAL; - if (blank_mode = FB_BLANK_POWERDOWN) { + if (blank_mode = FB_BLANK_POWERDOWN) s3c2410fb_lcd_enable(fbi, 0); - } else { + else s3c2410fb_lcd_enable(fbi, 1); - } if (blank_mode = FB_BLANK_UNBLANK) writel(0x0, tpal_reg); @@ -812,7 +811,7 @@ static inline void s3c2410fb_cpufreq_deregister(struct s3c2410fb_info *info) #endif -static char driver_name[] = "s3c2410fb"; +static const char driver_name[] = "s3c2410fb"; static int __devinit s3c24xxfb_probe(struct platform_device *pdev, enum s3c_drv_type drv_type) @@ -881,7 +880,10 @@ static int __devinit s3c24xxfb_probe(struct platform_device *pdev, goto release_mem; } - info->irq_base = info->io + ((drv_type = DRV_S3C2412) ? S3C2412_LCDINTBASE : S3C2410_LCDINTBASE); + if (drv_type = DRV_S3C2412) + info->irq_base = info->io + S3C2412_LCDINTBASE; + else + info->irq_base = info->io + S3C2410_LCDINTBASE; dprintk("devinit\n"); @@ -927,7 +929,7 @@ static int __devinit s3c24xxfb_probe(struct platform_device *pdev, clk_enable(info->clk); dprintk("got and enabled clock\n"); - msleep(1); + usleep_range(1000, 1000); info->clk_rate = clk_get_rate(info->clk); @@ -975,9 +977,8 @@ static int __devinit s3c24xxfb_probe(struct platform_device *pdev, /* create device files */ ret = device_create_file(&pdev->dev, &dev_attr_debug); - if (ret) { + if (ret) printk(KERN_ERR "failed to add debug attribute\n"); - } printk(KERN_INFO "fb%d: %s frame buffer device\n", fbinfo->node, fbinfo->fix.id); @@ -1027,7 +1028,7 @@ static int __devexit s3c2410fb_remove(struct platform_device *pdev) s3c2410fb_cpufreq_deregister(info); s3c2410fb_lcd_enable(info, 0); - msleep(1); + usleep_range(1000, 1000); s3c2410fb_unmap_video_memory(fbinfo); @@ -1064,7 +1065,7 @@ static int s3c2410fb_suspend(struct platform_device *dev, pm_message_t state) * the LCD DMA engine is not going to get back on the bus * before the clock goes off again (bjd) */ - msleep(1); + usleep_range(1000, 1000); clk_disable(info->clk); return 0; @@ -1076,7 +1077,7 @@ static int s3c2410fb_resume(struct platform_device *dev) struct s3c2410fb_info *info = fbinfo->par; clk_enable(info->clk); - msleep(1); + usleep_range(1000, 1000); s3c2410fb_init_registers(fbinfo); -- 1.7.1