From mboxrd@z Thu Jan 1 00:00:00 1970 From: Laurent Pinchart Date: Thu, 01 Mar 2012 15:07:41 +0000 Subject: [PATCH v2 28/57] fbdev: sh_mobile_hdmi: Don't set sh_hdmi::mode in the display on handler Message-Id: <1330614490-14149-29-git-send-email-laurent.pinchart@ideasonboard.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-fbdev@vger.kernel.org The struct sh_hdmi mode field is only used after being assigned by the EDID read code. There is thus no need to initialize it from the LCDC display var in the display on handler. Signed-off-by: Laurent Pinchart --- drivers/video/sh_mobile_hdmi.c | 8 +------- 1 files changed, 1 insertions(+), 7 deletions(-) diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c index 2617609..37f935f 100644 --- a/drivers/video/sh_mobile_hdmi.c +++ b/drivers/video/sh_mobile_hdmi.c @@ -995,7 +995,6 @@ static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id) static int sh_hdmi_display_on(struct sh_mobile_lcdc_entity *entity) { struct sh_hdmi *hdmi = entity_to_sh_hdmi(entity); - struct sh_mobile_lcdc_chan *ch = entity->lcdc; dev_dbg(hdmi->dev, "%s(%p): state %x\n", __func__, hdmi, hdmi->hp_state); @@ -1006,15 +1005,10 @@ static int sh_hdmi_display_on(struct sh_mobile_lcdc_entity *entity) * HDMI_HOTPLUG_CONNECTED: on monitor plug-in * HDMI_HOTPLUG_EDID_DONE: on EDID read completion */ - switch (hdmi->hp_state) { - case HDMI_HOTPLUG_EDID_DONE: + if (hdmi->hp_state = HDMI_HOTPLUG_EDID_DONE) { /* PS mode d->e. All functions are active */ hdmi_write(hdmi, 0x80, HDMI_SYSTEM_CTRL); dev_dbg(hdmi->dev, "HDMI running\n"); - break; - default: - fb_var_to_videomode(&hdmi->mode, &ch->display_var); - break; } return hdmi->hp_state = HDMI_HOTPLUG_DISCONNECTED -- 1.7.3.4