* [PATCH 2/2] fbdev: da8xx: add support for SP10Q010 display
@ 2012-03-09 15:02 Anatolij Gustschin
0 siblings, 0 replies; only message in thread
From: Anatolij Gustschin @ 2012-03-09 15:02 UTC (permalink / raw)
To: linux-fbdev
Add timing data for Hitachi SP10Q010 display and allow configuration
of the 4bpp palette. For 4bpp framebuffer enable reversed order of
pixels in a byte. This requires defining FB_CFB_REV_PIXELS_IN_BYTE
and additionally setting var.nonstd to the value FB_NONSTD_REV_PIX_IN_B.
Note that it is not enough to set da8xx_fb_var.nonstd to this value
statically, since FBIOPUT_VSCREENINFO ioctl might pass var struct with
.nonstd field set to zero or another value. Therefore this setting must
be adjusted in fb_check_var() according to the requested bpp value.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Manjunathappa, Prakash <prakash.pm@ti.com>
---
drivers/video/Kconfig | 1 +
drivers/video/da8xx-fb.c | 38 +++++++++++++++++++++++++++++++++++++-
2 files changed, 38 insertions(+), 1 deletions(-)
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6ca0c40..ce09b17 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2233,6 +2233,7 @@ config FB_DA8XX
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_CFB_REV_PIXELS_IN_BYTE
---help---
This is the frame buffer device driver for the TI LCD controller
found on DA8xx/OMAP-L1xx SoCs.
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 27c2794..0a382ed 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -238,6 +238,20 @@ static struct da8xx_panel known_lcd_panels[] = {
.pxl_clk = 7833600,
.invert_pxl_clk = 0,
},
+ [2] = {
+ /* Hitachi SP10Q010 */
+ .name = "SP10Q010",
+ .width = 320,
+ .height = 240,
+ .hfp = 10,
+ .hbp = 10,
+ .hsw = 10,
+ .vfp = 10,
+ .vbp = 10,
+ .vsw = 10,
+ .pxl_clk = 7833600,
+ .invert_pxl_clk = 0,
+ },
};
static inline unsigned long hz_to_ps(unsigned long hz_val)
@@ -554,7 +568,26 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
if (info->fix.visual = FB_VISUAL_DIRECTCOLOR)
return 1;
- if (info->var.bits_per_pixel = 8) {
+ if (info->var.bits_per_pixel = 4) {
+ if (regno > 15)
+ return 1;
+
+ if (info->var.grayscale) {
+ pal = regno;
+ } else {
+ red >>= 4;
+ green >>= 8;
+ blue >>= 12;
+
+ pal = (red & 0x0f00);
+ pal |= (green & 0x00f0);
+ pal |= (blue & 0x000f);
+ }
+ if (regno = 0)
+ pal |= 0x2000;
+ palette[regno] = pal;
+
+ } else if (info->var.bits_per_pixel = 8) {
red >>= 4;
green >>= 8;
blue >>= 12;
@@ -809,6 +842,7 @@ static int fb_check_var(struct fb_var_screeninfo *var,
var->blue.length = 8;
var->transp.offset = 0;
var->transp.length = 0;
+ var->nonstd = 0;
break;
case 4:
var->red.offset = 0;
@@ -819,6 +853,7 @@ static int fb_check_var(struct fb_var_screeninfo *var,
var->blue.length = 4;
var->transp.offset = 0;
var->transp.length = 0;
+ var->nonstd = FB_NONSTD_REV_PIX_IN_B;
break;
case 16: /* RGB 565 */
var->red.offset = 11;
@@ -829,6 +864,7 @@ static int fb_check_var(struct fb_var_screeninfo *var,
var->blue.length = 5;
var->transp.offset = 0;
var->transp.length = 0;
+ var->nonstd = 0;
break;
default:
err = -EINVAL;
--
1.7.7.6
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2012-03-09 15:02 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-09 15:02 [PATCH 2/2] fbdev: da8xx: add support for SP10Q010 display Anatolij Gustschin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).