linux-fbdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chandrabhanu Mahapatra <cmahapatra@ti.com>
To: tomi.valkeinen@ti.com
Cc: linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org,
	Chandrabhanu Mahapatra <cmahapatra@ti.com>
Subject: [PATCH 0/2] OMAPDSS: DISPC: Enable predecimation for DMA and VRFB
Date: Thu, 15 Mar 2012 11:49:12 +0000	[thread overview]
Message-ID: <1331812083-9739-1-git-send-email-cmahapatra@ti.com> (raw)

Hi everyone,
the following patch set directs to enable predecimation for DMA and VRFB
which consists of two pacthes.

The first patch is based on code written by Lajos Molnar <lajos@ti.com> in
Android Kernel, which updates the code with predecimation logic thereby
increasing the downscaling ability of the DISPC module.

The second patch is based on code written by Ville Syrjälä
<ville.syrjala@nokia.com> which aims to avoid synclost errors occurring
in OMAP3 due to some undocumented horizontal position and timing related
limitations which I faced during testing of the previous patch.

I have tested these patches successfully on OMAP2, OMAP3 AND OMAP4 on the
mainline kernel v3.3-rc5. Horizontal and vertical predecimation worked fine
but skewed images along with underflow errors were seen on OMAP2 and OMAP3
during horizontal predecimation which will be addressed in the future patches.

All your comments and suggestions are welcome.

Regards,
Chandrabhanu

Chandrabhanu Mahapatra (2):
  OMAPDSS: DISPC: Enable predecimation
  OMAPDSS: DISPC: Handle synclost errors in OMAP3

 drivers/video/omap2/dss/dispc.c |  323 +++++++++++++++++++++++++++++----------
 1 files changed, 242 insertions(+), 81 deletions(-)


                 reply	other threads:[~2012-03-15 11:49 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1331812083-9739-1-git-send-email-cmahapatra@ti.com \
    --to=cmahapatra@ti.com \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).