From: Archit Taneja <archit@ti.com>
To: tomi.valkeinen@ti.com
Cc: linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org,
Archit Taneja <archit@ti.com>
Subject: [PATCH v2 0/4] OMAPDSS: APPLY: Treat overlay manager timings as shadow registers
Date: Thu, 03 May 2012 07:19:40 +0000 [thread overview]
Message-ID: <1336028864-13895-1-git-send-email-archit@ti.com> (raw)
In-Reply-To: <1334561027-28569-1-git-send-email-archit@ti.com>
An overlay manager's timings (the manager size, and blanking parameters if an
LCD manager) are DISPC shadow registers, and they should hence follow the
correct programming model.
This set makes the timings an extra_info parameter in manager's private data .
The interface drivers now apply the timings in instead of directly writing to
registers.
This change also prevents the need to use display resolution for overlay
checks, hence making some of the APPLY functions less dependent on the display.
Changes since v2:
- Manager timings are represented as extra_info.
- The DISPC related cleanups are removed since they have already been taken.
These patches apply over:
git://gitorious.org/linux-omap-dss2/linux.git dev
Archit Taneja (4):
OMAPDSS: APPLY: Add manager timings as extra_info in private data
OMAPDSS: Apply manager timings instead of direct DISPC writes
OMAPDSS: MANAGER: Create a function to check manager timings
OMAPDSS: APPLY: Remove display dependency from overlay and manager
checks
drivers/video/omap2/dss/apply.c | 142 ++++++++++++++++++++++++++++++-------
drivers/video/omap2/dss/dpi.c | 4 +-
drivers/video/omap2/dss/dsi.c | 5 +-
drivers/video/omap2/dss/dss.h | 9 ++-
drivers/video/omap2/dss/hdmi.c | 2 +-
drivers/video/omap2/dss/manager.c | 19 +++++-
drivers/video/omap2/dss/overlay.c | 20 +++---
drivers/video/omap2/dss/rfbi.c | 4 +-
drivers/video/omap2/dss/sdi.c | 2 +-
drivers/video/omap2/dss/venc.c | 2 +-
10 files changed, 158 insertions(+), 51 deletions(-)
--
1.7.5.4
next prev parent reply other threads:[~2012-05-03 7:19 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-16 7:35 [PATCH 0/6] OMAPDSS: APPLY: Treat overlay manager timings as shadow registers Archit Taneja
2012-04-16 7:35 ` [PATCH 1/6] OMAPDSS: DISPC/RFBI: Use dispc_mgr_set_lcd_timings() for setting lcd size Archit Taneja
2012-04-16 7:35 ` [PATCH 2/6] OMAPDSS: DISPC: Use a common function to set manager timings Archit Taneja
2012-04-16 7:35 ` [PATCH 3/6] OMAPDSS: DISPC: Clean up manager timing/size functions Archit Taneja
2012-04-16 7:35 ` [PATCH 4/6] OMAPDSS: MANAGER: Make DISPC timings a manager_info parameter Archit Taneja
2012-04-18 14:58 ` Tomi Valkeinen
2012-04-19 6:25 ` Archit Taneja
2012-04-19 6:37 ` Tomi Valkeinen
2012-04-19 10:20 ` Archit Taneja
2012-04-19 11:37 ` Tomi Valkeinen
2012-04-16 7:35 ` [PATCH 5/6] OMAPDSS: MANAGER: Check validity of manager timings Archit Taneja
2012-04-16 7:35 ` [PATCH 6/6] OMAPDSS: APPLY: Remove display dependency from overlay and manager checks Archit Taneja
2012-04-19 11:48 ` [PATCH 0/6] OMAPDSS: APPLY: Treat overlay manager timings as shadow registers Tomi Valkeinen
2012-04-19 12:10 ` Archit Taneja
2012-04-19 12:00 ` Tomi Valkeinen
2012-05-03 7:19 ` Archit Taneja [this message]
2012-05-03 7:19 ` [PATCH v2 1/4] OMAPDSS: APPLY: Add manager timings as extra_info in private data Archit Taneja
2012-05-07 14:47 ` Tomi Valkeinen
2012-05-08 4:36 ` Archit Taneja
2012-05-08 7:01 ` Tomi Valkeinen
2012-05-03 7:19 ` [PATCH v2 2/4] OMAPDSS: Apply manager timings instead of direct DISPC writes Archit Taneja
2012-05-03 7:19 ` [PATCH v2 3/4] OMAPDSS: MANAGER: Create a function to check manager timings Archit Taneja
2012-05-03 7:19 ` [PATCH v2 4/4] OMAPDSS: APPLY: Remove display dependency from overlay and manager checks Archit Taneja
2012-05-07 15:03 ` Tomi Valkeinen
2012-05-08 5:15 ` Archit Taneja
2012-05-08 7:16 ` Tomi Valkeinen
2012-05-08 7:50 ` Archit Taneja
2012-05-08 8:52 ` Tomi Valkeinen
2012-05-08 9:19 ` Archit Taneja
2012-05-08 10:10 ` [PATCH v3 0/5] OMAPDSS: APPLY: Treat overlay manager timings as shadow registers Archit Taneja
2012-05-08 10:10 ` [PATCH v3 1/5] OMAPDSS: APPLY: Add manager timings as extra_info in private data Archit Taneja
2012-05-08 10:10 ` [PATCH v3 2/5] OMAPDSS: Apply manager timings instead of direct DISPC writes Archit Taneja
2012-05-08 10:59 ` Tomi Valkeinen
2012-05-08 10:10 ` [PATCH v3 3/5] OMAPDSS: MANAGER: Create a function to check manager timings Archit Taneja
2012-05-08 10:10 ` [PATCH v3 4/5] OMAPDSS: APPLY: Remove display dependency from overlay and manager checks Archit Taneja
2012-05-08 10:50 ` Tomi Valkeinen
2012-05-08 11:34 ` Archit Taneja
2012-05-08 11:55 ` Tomi Valkeinen
2012-05-08 12:47 ` Archit Taneja
2012-05-09 9:56 ` Archit Taneja
2012-05-09 10:15 ` Tomi Valkeinen
2012-05-08 10:10 ` [PATCH v3 5/5] OMAPDSS: DPI/HDMI: Apply manager timings even if panel is disabled Archit Taneja
2012-05-09 10:22 ` [PATCH v4 0/9] OMAPDSS: APPLY: Treat overlay manager timings as shadow registers Archit Taneja
2012-05-09 10:22 ` [PATCH v4 1/9] OMAPDSS: APPLY: Add manager timings as extra_info in private data Archit Taneja
2012-05-09 10:22 ` [PATCH v4 2/9] OMAPDSS: Apply manager timings instead of direct DISPC writes Archit Taneja
2012-05-09 10:22 ` [PATCH v4 3/9] OMAPDSS: MANAGER: Create a function to check manager timings Archit Taneja
2012-05-09 10:22 ` [PATCH v4 4/9] OMAPDSS: APPLY: Don't check manager settings if it is disabled Archit Taneja
2012-05-09 10:22 ` [PATCH v4 5/9] OMAPDSS: APPLY: Remove display dependency from overlay and manager checks Archit Taneja
2012-05-09 10:22 ` [PATCH v4 6/9] OMAPDSS: DPI/HDMI: Apply manager timings even if panel is disabled Archit Taneja
2012-05-09 10:22 ` [PATCH v4 7/9] OMAPDSS: APPLY: Remove an unnecessary omap_dss_device pointer Archit Taneja
2012-05-09 10:22 ` [PATCH v4 8/9] OMAPDSS: DISPC: Remove omap_dss_device pointer usage from dispc_mgr_pclk_rate() Archit Taneja
2012-05-09 10:22 ` [PATCH v4 9/9] OMAPDSS: DISPC: Remove usage of dispc_mgr_get_device() Archit Taneja
2012-05-09 11:13 ` [PATCH v4 0/9] OMAPDSS: APPLY: Treat overlay manager timings as shadow registers Tomi Valkeinen
2012-05-09 11:36 ` Archit Taneja
2012-05-09 11:51 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336028864-13895-1-git-send-email-archit@ti.com \
--to=archit@ti.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).