Linux Framebuffer Layer development
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>,
	LKML <linux-kernel@vger.kernel.org>,
	linux-fbdev@vger.kernel.org
Subject: [PATCH for v3.4] fbdev: sh_mobile_lcdc: Don't confuse line size with pitch
Date: Fri, 18 May 2012 08:58:26 +0000	[thread overview]
Message-ID: <1337331506-13156-1-git-send-email-laurent.pinchart@ideasonboard.com> (raw)

When using the MERAM the LCDC line size needs to be programmed with a
MERAM-specific value different than the real frame buffer pitch. Fix it.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/sh_mobile_lcdcfb.c |    5 +++--
 drivers/video/sh_mobile_lcdcfb.h |    1 +
 2 files changed, 4 insertions(+), 2 deletions(-)

Hi Linus,

Could you please apply this patch to v3.4-rc ? I apologize for pushing it this
late, but this is a fix for a 3.4 regression that has only been discovered now
and breaks an important use case (fbcon on SH Mobile).

Due to the little time left before v3.4 Florian has asked me to send you the
patch directly instead of pushing it through his tree.

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 7a0b301..e672698 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -758,7 +758,7 @@ static void __sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 		}
 
 		lcdc_write_chan(ch, LDDFR, tmp);
-		lcdc_write_chan(ch, LDMLSR, ch->pitch);
+		lcdc_write_chan(ch, LDMLSR, ch->line_size);
 		lcdc_write_chan(ch, LDSA1R, ch->base_addr_y);
 		if (ch->format->yuv)
 			lcdc_write_chan(ch, LDSA2R, ch->base_addr_c);
@@ -847,6 +847,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 
 		ch->base_addr_y = ch->dma_handle;
 		ch->base_addr_c = ch->base_addr_y + ch->xres * ch->yres_virtual;
+		ch->line_size = ch->pitch;
 
 		/* Enable MERAM if possible. */
 		if (mdev = NULL || mdev->ops = NULL ||
@@ -882,7 +883,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 
 		meram = mdev->ops->meram_register(mdev, ch->cfg->meram_cfg,
 					ch->pitch, ch->yres, pixelformat,
-					&ch->pitch);
+					&ch->line_size);
 		if (!IS_ERR(meram)) {
 			mdev->ops->meram_update(mdev, meram,
 					ch->base_addr_y, ch->base_addr_c,
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
index da1c26e..5c3bddd 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -84,6 +84,7 @@ struct sh_mobile_lcdc_chan {
 
 	unsigned long base_addr_y;
 	unsigned long base_addr_c;
+	unsigned int line_size;
 
 	int (*notify)(struct sh_mobile_lcdc_chan *ch,
 		      enum sh_mobile_lcdc_entity_event event,
-- 
Regards,

Laurent Pinchart


                 reply	other threads:[~2012-05-18  8:58 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1337331506-13156-1-git-send-email-laurent.pinchart@ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=FlorianSchandinat@gmx.de \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox