[PATCH 2/3] mx3fb: support pan display with fb_set_var

[Liu Ying <Ying.Liu@freescale.com>]

Users may call FBIOPUT_VSCREENINFO ioctrl to do pan display.
This ioctrl relies on fb_set_var() to do the job. fb_set_var()
calls the custom fb_set_par() method and then calls the custom
fb_pan_display() method. Before calling the custom fb_pan_display()
method, info->var is already updated from the new *var in fb_set_var().
And, the custom fb_pan_display() method checks if xoffset and yoffset
in info->var and the new *var are different before doing actual panning,
which prevents the panning from happening within fb_set_var() context.
This patch caches the current var info locally in mx3fb driver so that
pan display with fb_set_var is supported.

Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
---
 drivers/video/mx3fb.c |   33 ++++++++++++++++++++++++++-------
 1 files changed, 26 insertions(+), 7 deletions(-)

diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index d53db60..2dd11c4 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -268,7 +268,7 @@ struct mx3fb_info {
 	dma_cookie_t			cookie;
 	struct scatterlist		sg[2];
 
-	u32				sync;	/* preserve var->sync flags */
+	struct fb_var_screeninfo	cur_var; /* current var info */
 };
 
 static void mx3fb_dma_done(void *);
@@ -723,7 +723,7 @@ static void mx3fb_dma_done(void *arg)
 
 static int __set_par(struct fb_info *fbi, bool lock)
 {
-	u32 mem_len;
+	u32 mem_len, cur_xoffset, cur_yoffset;
 	struct ipu_di_signal_cfg sig_cfg;
 	enum ipu_panel mode = IPU_PANEL_TFT;
 	struct mx3fb_info *mx3_fbi = fbi->par;
@@ -805,8 +805,25 @@ static int __set_par(struct fb_info *fbi, bool lock)
 	video->out_height	= fbi->var.yres;
 	video->out_stride	= fbi->var.xres_virtual;
 
-	if (mx3_fbi->blank = FB_BLANK_UNBLANK)
+	if (mx3_fbi->blank = FB_BLANK_UNBLANK) {
 		sdc_enable_channel(mx3_fbi);
+		/*
+		 * sg[0] points to fb smem_start address
+		 * and is actually active in controller.
+		 */
+		mx3_fbi->cur_var.xoffset = 0;
+		mx3_fbi->cur_var.yoffset = 0;
+	}
+
+	/*
+	 * Preserve xoffset and yoffest in case they are
+	 * inactive in controller as fb is blanked.
+	 */
+	cur_xoffset = mx3_fbi->cur_var.xoffset;
+	cur_yoffset = mx3_fbi->cur_var.yoffset;
+	mx3_fbi->cur_var = fbi->var;
+	mx3_fbi->cur_var.xoffset = cur_xoffset;
+	mx3_fbi->cur_var.yoffset = cur_yoffset;
 
 	return 0;
 }
@@ -926,8 +943,8 @@ static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
 	var->grayscale = 0;
 
 	/* Preserve sync flags */
-	var->sync |= mx3_fbi->sync;
-	mx3_fbi->sync |= var->sync;
+	var->sync |= mx3_fbi->cur_var.sync;
+	mx3_fbi->cur_var.sync |= var->sync;
 
 	return 0;
 }
@@ -1073,8 +1090,8 @@ static int mx3fb_pan_display(struct fb_var_screeninfo *var,
 		return -EINVAL;
 	}
 
-	if (fbi->var.xoffset = var->xoffset &&
-	    fbi->var.yoffset = var->yoffset)
+	if (mx3_fbi->cur_var.xoffset = var->xoffset &&
+	    mx3_fbi->cur_var.yoffset = var->yoffset)
 		return 0;	/* No change, do nothing */
 
 	y_bottom = var->yoffset;
@@ -1157,6 +1174,8 @@ static int mx3fb_pan_display(struct fb_var_screeninfo *var,
 	else
 		fbi->var.vmode &= ~FB_VMODE_YWRAP;
 
+	mx3_fbi->cur_var = fbi->var;
+
 	mutex_unlock(&mx3_fbi->mutex);
 
 	dev_dbg(fbi->device, "Update complete\n");
-- 
1.7.1