From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: Archit Taneja <archit@ti.com>
Cc: linux-fbdev@vger.kernel.org, linux-omap@vger.kernel.org,
sumit.semwal@ti.com, rob@ti.com
Subject: Re: [RFC 08/17] OMAPDSS: DSI: Maintain own copy of timings in driver data
Date: Tue, 07 Aug 2012 14:07:42 +0000 [thread overview]
Message-ID: <1344348462.7216.77.camel@lappyti> (raw)
In-Reply-To: <1343817088-29645-9-git-send-email-archit@ti.com>
[-- Attachment #1: Type: text/plain, Size: 1827 bytes --]
On Wed, 2012-08-01 at 16:01 +0530, Archit Taneja wrote:
> The DSI driver currently relies on the timings in omap_dss_device struct to
> configure the DISPC and DSI blocks accordingly. This makes the DSI interface
> driver dependent on the omap_dss_device struct.
>
> Make the DPI driver data maintain it's own timings field. The panel driver is
^^^
DSI
> expected to call omapdss_dsi_set_timings() to set these timings before the panel
> is enabled.
>
> Signed-off-by: Archit Taneja <archit@ti.com>d
> ---
> drivers/video/omap2/displays/panel-taal.c | 2 ++
> drivers/video/omap2/dss/dsi.c | 27 ++++++++++++++++++++++-----
> include/video/omapdss.h | 2 ++
> 3 files changed, 26 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
> index 3f5acc7..4775580 100644
> --- a/drivers/video/omap2/displays/panel-taal.c
> +++ b/drivers/video/omap2/displays/panel-taal.c
> @@ -1060,6 +1060,8 @@ static int taal_power_on(struct omap_dss_device *dssdev)
> goto err0;
> };
>
> + omapdss_dsi_set_timings(dssdev, &td->panel_config->timings);
> +
> r = omapdss_dsi_display_enable(dssdev);
> if (r) {
> dev_err(&dssdev->dev, "failed to enable DSI\n");
Video timings for command mode panel are meaningless. If we need to pass
the resolution of the panel, perhaps we should have a separate function
for that.
However, with a quick glance at dsi.c, we don't even use the
dssdev->panel.timings for cmd mode panel. But we do use
dssdev->get_resolution() in a few places. Those calls could be replaced
by storing the panel size in dsi.c, given with omapdss_dsi_set_size() or
such. We could use the timings field in dsi.c to store them, though.
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
next prev parent reply other threads:[~2012-08-07 14:07 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-01 10:43 [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface Archit Taneja
2012-08-01 10:43 ` [RFC 01/17] OMAPDSS: APPLY: Constify timings argument in dss_mgr_set_timings Archit Taneja
2012-08-01 10:43 ` [RFC 02/17] OMAPDSS: DPI: Remove omap_dss_device arguments in dpi_set_dsi_clk/dpi_set_dispc_clk Archit Taneja
2012-08-01 10:43 ` [RFC 03/17] OMAPDSS: HDMI: Remove omap_dss_device argument from hdmi_compute_pll Archit Taneja
2012-08-01 10:43 ` [RFC 04/17] OMAPDSS: DPI: Add locking for DPI interface Archit Taneja
2012-08-01 10:43 ` [RFC 05/17] OMAPDSS: DPI: Maintain our own timings field in driver data Archit Taneja
2012-08-01 10:43 ` [RFC 06/17] OMAPDSS: DPI displays: Take care of panel timings in the driver itself Archit Taneja
2012-08-01 10:43 ` [RFC 07/17] OMAPDSS: Displays: Add locking in generic DPI panel driver Archit Taneja
2012-08-01 10:43 ` [RFC 08/17] OMAPDSS: DSI: Maintain own copy of timings in driver data Archit Taneja
2012-08-07 14:07 ` Tomi Valkeinen [this message]
2012-08-08 6:09 ` Archit Taneja
2012-08-08 6:15 ` Tomi Valkeinen
2012-08-08 6:41 ` Archit Taneja
2012-08-08 7:10 ` Tomi Valkeinen
2012-08-08 8:06 ` Archit Taneja
2012-08-01 10:43 ` [RFC 09/17] OMAPDSS: HDMI: Use our own omap_video_timings field when setting interface timings Archit Taneja
2012-08-01 10:43 ` [RFC 10/17] OMAPDSS: HDMI: Add a get_timing function for HDMI interface Archit Taneja
2012-08-01 10:43 ` [RFC 11/17] OMAPDSS: HDMI: Add locking for hdmi interface get/set timing functions Archit Taneja
2012-08-01 10:43 ` [RFC 12/17] OMAPDSS: SDI: Create a separate function for timing/clock configurations Archit Taneja
2012-08-01 10:43 ` [RFC 13/17] OMAPDSS: SDI: Create a function to set timings Archit Taneja
2012-08-07 14:20 ` Tomi Valkeinen
2012-08-08 6:10 ` Archit Taneja
2012-08-01 10:43 ` [RFC 14/17] OMAPDSS: SDI: Maintain our own timings field in driver data Archit Taneja
2012-08-01 10:43 ` [RFC 15/17] OMAPDSS: VENC: Split VENC into interface and panel driver Archit Taneja
2012-08-01 10:43 ` [RFC 16/17] OMAPDSS: VENC: Maintain our own timings field in driver data Archit Taneja
2012-08-01 10:43 ` [RFC 17/17] OMAPDSS: VENC: Add a get_timing function for VENC interface Archit Taneja
2012-08-01 10:47 ` [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface Archit Taneja
2012-08-07 14:32 ` Tomi Valkeinen
2012-08-08 6:17 ` Archit Taneja
2012-08-08 6:25 ` Tomi Valkeinen
2012-08-08 6:59 ` Archit Taneja
2012-08-08 7:27 ` Tomi Valkeinen
2012-08-08 8:11 ` Archit Taneja
2012-08-08 8:13 ` Tomi Valkeinen
2012-08-08 8:50 ` Archit Taneja
2012-08-08 8:48 ` Tomi Valkeinen
2012-08-08 9:36 ` Archit Taneja
2012-08-09 11:55 ` [PATCH v2 00/13] " Archit Taneja
2012-08-09 11:56 ` [PATCH v2 01/13] OMAPDSS: DPI: Maintain our own timings field in driver data Archit Taneja
2012-08-09 11:56 ` [PATCH v2 02/13] OMAPDSS: DPI displays: Take care of panel timings in the driver itself Archit Taneja
2012-08-09 11:56 ` [PATCH v2 03/13] OMAPDSS: DSI: Maintain own copy of timings in driver data Archit Taneja
2012-08-09 11:56 ` [PATCH v2 04/13] OMAPDSS: DSI: Add function to set panel size for command mode panels Archit Taneja
2012-08-09 11:56 ` [PATCH v2 05/13] OMAPDSS: DSI: Update manager timings on a manual update Archit Taneja
2012-08-09 11:56 ` [PATCH v2 06/13] OMAPDSS: HDMI: Use our own omap_video_timings field when setting interface timings Archit Taneja
2012-08-09 11:56 ` [PATCH v2 07/13] OMAPDSS: HDMI: Add a get_timing function for HDMI interface Archit Taneja
2012-08-14 13:02 ` Tomi Valkeinen
2012-08-14 13:27 ` Archit Taneja
2012-08-14 14:10 ` Tomi Valkeinen
2012-08-14 17:28 ` Archit Taneja
2012-08-09 11:56 ` [PATCH v2 08/13] OMAPDSS: HDMI: Add locking for hdmi interface get/set timing functions Archit Taneja
2012-08-09 11:56 ` [PATCH v2 09/13] OMAPDSS: SDI: Create a function to set timings Archit Taneja
2012-08-14 13:44 ` Tomi Valkeinen
2012-08-14 17:08 ` Archit Taneja
2012-08-14 17:33 ` Tomi Valkeinen
2012-08-14 19:20 ` Archit Taneja
2012-08-15 6:43 ` Tomi Valkeinen
2012-08-14 19:26 ` Rob Clark
2012-08-09 11:56 ` [PATCH v2 10/13] OMAPDSS: SDI: Maintain our own timings field in driver data Archit Taneja
2012-08-09 11:56 ` [PATCH v2 11/13] OMAPDSS: VENC: Split VENC into interface and panel driver Archit Taneja
2012-08-09 11:56 ` [PATCH v2 12/13] OMAPDSS: VENC: Maintain our own timings field in driver data Archit Taneja
2012-08-09 11:56 ` [PATCH v2 13/13] OMAPDSS: VENC: Add a get_timing function for VENC interface Archit Taneja
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1344348462.7216.77.camel@lappyti \
--to=tomi.valkeinen@ti.com \
--cc=archit@ti.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=rob@ti.com \
--cc=sumit.semwal@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).